I have a feild in my table that I need to increase by 1 each year.
eg.
2004- needs to change to 2005- on 1/1/2005 and keep changeing each year after that.
I am sure this is simple but all my attempts at makeing a counter have failed thus far.
I have a form and subform which have the total value of subscriptions made for the month on them.
The subform has the individual values, and the mainform has the total value for that month.
how can i then assign the value of a feild on the mainform, to a value in one of my tables?
whats the best way to go about it?
thanks
BB
Hi,
I'm trying to create a table which needs some feilds to be automatically filled up when the control goes to it. Say my table has feilds, "size" and "result". In each row, the result cell should be filled up corresponding to the size value of that row. This needs to be looked up from an existing table.
Would appreciate any solutions!
I have been struggling with this and would appreciate any help. It sounds so simple!!! I have 4 fields (Unit Price 1, Unit Price 2, Unit Price 3, Unit Price 4) in a Orders table that I want to add together and store in a 5th field (Sub Total) in the same table using a form. I am having problems with the sum and I am unsure how to get it to show in the Sub Total box in the form as well as the table. Thanks for your help!!
View 2 Replies View Relatedi have an Address textbox that has key behaviour as - new line in field. this allows me to put the complete address in one box, post code is another textbox. this is fine if i want to create window envelopes but - if i want the address to look as one long line in a report it wont work
since the address in the form takes up two lines -- only the first line shows in the address column of the table - hence only one row shows in the report that derives from that table SO =[Address]&" "&[PostCode] placed in the Source Code of the address only shows the first line plus post code . if i make the box deeper then it will show - but only as a second line - i want it all to be one line
can i get out of this and still keep the -new line in field- behaviour?
thanks in anticipation
Hi,
I created an icon for my database application and I would like to display it in each form's title bar. Is this possible? And if it is, how? A few years ago I learned a little Delphi programming, and there this is possible to do.
Thanx!
Attila
Is their a way to highlight a feild. I am using the duplicate function but after the record is duplicated their are certain feilds that have to be changed, how can i highlight them somehow. ANy ideas??? The feild is Price???
Thanks Very good forum
Pete
The situation I am in at the moment is that I have a database for a company who does work at different building sites. I have created a database so that it has the date the work was completed. With this company in particular the last possible dates of payment are 30 or 60 days after the work was completed, depending on the work. I would like to know how I would be able to create a calculated field that would display the first day that the payment is late.
I have have 2 feilds in my database, there can be the same value in one feild but not both.....for example say NAME and ADDRESS i can have the same NAME for more then one entery and i can have the same ADDRESS for more then one entery but i cant have the same NAME And the same ADDRESS....anyone know how to do this? :confused:
View 2 Replies View RelatedIm having a problem with controling duplicate records in a table
i want to allow duplicates in all feilds individually, but not if 3 feilds are the same in more than one record. (ei. if the entries in a1,b1,c1 are equal to entries in a2,b2,c2; prevent the second record from being entered)
so far, i've writen a macro to identify duplicates in an existing table, but i dont know how to delete records, or access values being entered in a form
any help would be greatly appretiated, thanks
I have a table (tblStudent) containing a field named fldTeacher1. Looking at the properties of fldTeacher1 I see that it has a lookup:
Bound Column: 1
Column Count: 2
Column Widths: 0";1" (id number; teacher's Name)
I am trying to run a DoCmd.RunSQL command in code and My question is how do I write a sql statement in code that updates that field with a new value?
I have tried:
DoCmd.RunSQL ("UPDATE tblStudent SET fldTeacher1 = " & Val(txtID) & " WHERE fldID = " & gintStudentID & ";")
All it does is place the id # in the field and not display the teacher's name in fldTeacher1 after the command was run.
How can I update (some columns) in a table from the same table based on a Criteria column in the same table.
View 2 Replies View RelatedI need to get x and y coordinates for each device, but the data has to get looked up from 2 other tables.
I have a table (called InstReclosers) that has device names. Each device is on a Section. I can go to another table (called InstSections) and look up what Node that particular section is tied to. Then I need to go to another table (called Nodes) to get the X and Y location for that particular node.
How I can go about getting this X and Y data into the InstReclosers table?
...in summary, InstReclosers has device name and section name. InstSections has section name and node name. Nodes has node name and XY coords. Need XY coords for each device in InstReclosers.
When I try to transfer (ctrl c + v) data from a table in Excel to a table in Access it loses format.
Exemple: $ 1.000,00 (Excel) become 1000 (Access).
I need to keep the format to make sure that the code works properly.
I have a make-table query that pulls all the fields from 1 table (MainTable), and creates a new table with a date stamp based apon a form value entered (New Table = MainTableWithDate).
Currently, I setup the query to pull info from the form field like this:
DateField: [Forms]![frmmain]![DateField]
However, when the make-table query is done - all date fields are blank (all other fields are correctly created), and when I look at the new created table (mainTableWIthDate), the typeassigned to the date field is "Binary" (in the form, I've specified LongDate).
I have a table products with a field "id_product" and "total" (Total items in stock)
I have a query with the fields "id_product" and also the field "total in stock"
I want an update query to update the field 'total' in table 'products' with infos from that query
For each id-product in table products, replace the field total with the field 'total in stock' from the query
So I want to update a filed in a specific table with infos form another table.
Here's a query that the bottom listview in the attached form i.e. a listview representing a table of calls(many) to fims (1 top listview)
Code:
SELECT calls.id, calls.firm_id, calls.called, calls.said, calls.spoke_to, calls.next
FROM calls
WHERE (((calls.firm_id)=[firms].[id]))
ORDER BY calls.called DESC , calls.next DESC;
When I run the thing...I get a dialog asking me for firm id.
I want to change this so when I move up and down the firms LV (top)... the bottom LV updates taking firm id from the top LV with focus.
Access 2003.
I have an MS Access accdb with linked SQL Server 2012 ODBC tables. I am working on a procedure to copy data from local tables to these linked tables (identical schema). I did a simple
Code:
DoCmd.RunSQL "INSERT INTO linkedTable SELECT * FROM localTable"
This works, but is very slow. Way too slow. (INSERT copies the data one record at a time).
I would like to copy the data in a bulk operation, or operations that I can execute programmatically.
I have a table for a multiple parents linked to a child table. I need to figure out a way to only allow 1 parent to be coded as primary, 1 as secondary, and then the rest as other... I thought about making Primary/Secondary/Other a primary key. But then I can only have 1 other. I would have to make a finite number of parents that could be entered and I want an infinite number.... My end goal is to have a report that only has a primary and second parent on it, but the rest of the parents still exist in the table...
*Child_ID
Parent_First_Name
*Primary/Secondary/Other
How to make a form open with data from a table based on a date and time in the/a table?
View 7 Replies View RelatedHi,
I am extracting data from linked db2 table using access make table query. First I create a select query and can view the linked db2 data, but when I change to a make table query I get an error message, "invalid argument", when I run the make table query. There is no selection critera specified. Has anyone had this happen? and Do you know a solution?
Thanks for your support
GinnyP
Ok my problem is this......
I have a form with a field "Property Status" on it. It has 4 possible values -
"C - SHELTERED (with warden charge)";"H - SHELTERED (No warden charge)";"J - WHEELCHAIR SHELTERED (With warden charge)";"M - WHEELCHAIR SHELTERED (No warden charge)";"X - DISCONNECTED"
When the value "X - DISCONNECTED" is selected in the form I want the record to be removed from its existing table and sent to a new table which keeps all the "X - DISCONNECTED" records together.
Any ideas would be greatly appreciated. How would this be coded?
Hi everybody,
Beginner here needs help !
I'm building a make-table query for which if the result is null (no record correspond to the set of criterias), a default message like "there was no activity during the period" would appear in the table (not a message box...I need the message in the output table). The best I could think of is an IIF function but it doesn't seem to work... Is there any way to do this without using VBA?
Thanks in advance !
In a situation where I imported an excel file with so many columns and split them into two temp tables and they are linked using a key.
the data has a fixed part lets say
Field1....Field2.....Filed3.....Field4...then Field5.....Field6.....Field7....Field8 is the same data range as Field9...Field10...Field11...Field12. I would want to split this data into multiple rows like this
Field 1 Field2 Field3 Field4 Field5 Field6 Field7 Field8
Field 1 Field2 Field3 Field4 Field9 field10 field11 field12 and so own...
What is the best approach?
I have one DB that is used for creating/storing customer ID's, and another DB that is used for creating/storing job information for customers.I have linked the table from the customer DB to the job DB.
There is a table in the job database that holds customer name and ID, and some VBA that generates unique job codes.
Is it possible to have the data from the linked table automatically update into the existing table?
If you want to use a "DoCmd.RunSQL "INSERT INTO" command to insert data in a table and the data to insert comes from a table and a form, could this be done in one pass?
So...writing a record wit 4 values from table1 together with a additional value from a textbox in table2 as 5 values.