Changing A Command Button According To The Number Of Records
Nov 13, 2007
I have a subform where you can add multiple records. i have a command button labelled NEXT (which obviously navigates to the next record) but I only want this to be enabled when there is more than one record.
I am OK on the enabling bit but how do you specify if the record number >1?
Does someone have time to start me off on some code?
I want to open a new form with information related to the main form.
The code I've used is: Private Sub GoToContacts_Click() On Error GoTo Err_GoToContacts_Click Dim stDocName As String Dim stLinkCriteria As String stDocName = "Contacts"
I'd like to change the colour of the text in a command button when the user click the button, but for the text to return to it's original colour when the botton pops back up.
I'm assuming you use the following commands:
Private Sub cmdClose_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single) *******CODE******** End Sub
Private Sub cmdClose_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single) *******CODE******** End Sub
But I'm not sure as to how I would enter the correct code.
We have an old laptop running XP.I have an old Access 2000 disc which I no longer use, and this has been loaded to that machine.I am trying to build a very simple database to keep track of the members hours.The table name is Main_Table, the fields are; [ID],[Name].[Hours].A form exists Sign In.On the Form,Sign In I need a Combo Box or List Box to select a record (name) then a command button which adds 2 hours to the number of hours already in the [Hours] field of that selected record, simple as that.I cant get anything to run
Need to have a command button at form.. what i need to do is is saving a record through command button one time so produce same id for all parts like;
if i am having a field as parts and id now if i put parts as;
Parts ID
Wheel Tyre Rim
so at the time of button click (command button) the id number to be issued as same as 1 for all three parts, when adding more parts after few minutes or after the click then after addition of next parts the id should be 2 for all, means what i need is to have id number as respect of button click but once click then 1, then after =2 and so on..
I have 2 tables, one has a list of comments indexed by numbers.
The second table will be populated with numbers that correspond to the first table based on usage of the form that I'm about to describe.
The form contains several check boxes. Each corresponds to a comment from the first table. If 3 of the check boxes are selected when the command button is pressed, I want three separate new record entries to go into the second table and the data that I want entered is the text in the label that is next to each check box on the form. After the records are added to the table, I'd like to reset the check boxes.
I simply cannot figure out how to code the button to do this.
I have two tables, one is GENETIC and the other one is BoneSampleDNAprofile. Both tables have the field CY-Code. I want to create small form with 2 text box fields and one command button on the form to be able to insert CY-Code from the table GENETIC to designated DNA_LAB_Code in the table BoneSampleDNAprofile.
In that small form I would type DNA_LAB_Code and CY-Code where after pressing command button will insert CY-Code for the designated DNA_LAB_Code. This is continuous process after our Laboratory receive results from DNA laboratory. I have attached two .png files which are example of two tables.
Is it possible to use a command button (update) to update matching records in a form (Test)? I have a file (april.xlsx) in which the first column Cytogenetics ID (14-xxxx) is a unique identifier that matches a record in the database. The next column Result (NL-F, NL-M, F-VUS, M-VUS, A-M, A-F) and the date column next to it are what need to be updated in that record. In the database there is a field called Result that needs to be updated with the text from column 2:
NL-F and NL-M = Normal VUS-F and VUS-M = Variant of Unknown Sig. A-M and A-F = Abnormal
There is also a Final TAT Date field in the database that needs to be updated with column 3 in the spreadsheet (Final TAT Date).So basically when there is a match with column 1 in april.txt to a record in the database, the Result field in the database is updated with column 2 of april.txt and the Final TAT Date field in the database is updated with column 3 of april.txt.
Cytogenetics ID Result Final TAT Date 14-0390 Normal 4/11/2014 14-0396 Variant of Unknown Sig 4/18/2014
I am trying to create a command button that will delete the current records in both the subform and main form.
I know how to create a command button that will delete the current record of which ever form I'm in (either the sub or main form) but I wish to do so both at the same time with one event procedure. I currently have been experimenting with a button in the subform but I don't really care if it's in the subform or main form.
I have a tabbed form in a navigation form with a chart on it. The records source of the chart is a query. The query runs when you click the tab and takes a long time. I changed the Row Source of chart to "" and that eliminates the query running on form load. I've read many posts on changing that row source when a command button is clicked. I tried
in the onclick event of the command button. This doesn't work. I've tried many variations of the syntax. I don't know if I have to tell the query to run after the row source is changed.
On a side note, the query criteria is based on beginning and end dates entered into text boxes on the form. This all works if the query loads when the form is opened.
I know this has probably been gone over, but I'm just looking for a super-simple way to put a button on my form that will create a number of records equal to the number of days in the month listed in a field. For instance, if MyField is "4/1/2015", I'd like the system to create one record for each date between 4/1/15 and 4/30/15.
I have scoured the forums, and I find many threads on creating multiple records, but none of them deal with the same type of thing I need. I have a field, called MyField, and I have a table called MyTable with a column called MyDate. I want to enter a date into MyField, then click a button, and the button will run code/macro/whatever that will create multiple rows in MyTable, one for each date in Month([MyField])
I am rewriting an old Access 2003 database in Access 2010. When creating new command buttons, the current theme gives them a default appearance. I need to apply this appearance to old command buttons. I know there is a way to select the default button and apply its properties to others quickly. I have done it before but didn't write the process down .
I have created a web-database (? - There are globes over all the forms and tables icons) based on the Issues & Tasks template. This means that most of the data is entered and seen on the "Main" form, which has two tabs - Open Issues and Closed Issues. I have created a form that allows people at my work to input the necessary data and save it, so that it will show up on one of the two tabs. However, once a record has been created, I want to be initially locked if the ID/PK is clicked, so that data can't be changed or entered inadvertently.
SO, I changed the code so that when the ID/PK for a record is clicked, it brings up a different form, but one that looks exactly like the one that is brought up when entering a new form, but I locked all of the fields so that the information cannot be changed. It seems from what I have read that I can create a button on this form so that when clicked, it unlocks the fields on the form so that they can be changed, and then when clicked again it will lock the fields again. Is this true? If so, how can I do it? Or is there something similar I can do? I have seen codes that I could copy and paste, but I cannot figure out the place to copy and paste codes in Access 2010.
I have changed the Form properties so that Data Entry and all the "Allows" are set to No...
Hi, I have got a small problem and maybe someone could advise me. I am creating a customised command button from a label button. The new button works fine but I can't apply the 'requery' function to it, if i do an error occures and i am being prompt to save the data first???? :confused: :
Private Sub Labelsearch_Click() Me!itemquery.Requery End Sub
Private Sub Labelsearch_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single) Me.Labelsearch.SpecialEffect = 2 Me.Labelsearch.BackColor = 255 Me.Labelsearch.ForeColor = 10092543 Me.Labelsearch.FontItalic = True Me.Labelsearch.FontBold = True End Sub
Private Sub Labelsearch_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single) Me.Labelsearch.ForeColor = 255 Me.Labelsearch.FontItalic = False Me.Labelsearch.FontBold = True End Sub
Private Sub Labelsearch_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single) 'Come back to initial state when button release' Me.Labelsearch.SpecialEffect = 1 Me.Labelsearch.BackColor = 16373685 Me.Labelsearch.ForeColor = 8388608 Me.Labelsearch.FontItalic = False Me.Labelsearch.FontBold = True End
If I create a command button with the wizard and assign the code : me!itemquery.Requeryto the on_click event my form is working fine. Why is his code is not working if I assign it to a label? :o
I have the following form and subform combination:
The subform is linked to the main form by way of the "ProductID" control. (It's hidden in the subform).
Basically, each product (the finished article) is made up of many components.
What I would like to do is this:
1. Increase the stock of a "Product". 2. The Stock level control on the main form will then increment as much as selected 3. Contrary to that, I would like each component to decrement the relevant amount based on how much of the component is used up to make the product.
E.g. If I have Product A and it contains 2 components of which component A is used once per product but component B is used twice, then when I increase stock of product by 1, then component A goes down by 1 and component B goes down by 2. But If I put two of a product in to stock, I would obviously need component A to go down by 2 but component B to go down by 4.
I am thinking I need some way to loop through each record in the sub form for the current form, such as "Do While Not", or a "For Each". And then stick an Update query within the loop, but to be honest I can't think of how I need to address it!
I'm struggling with a small issue that has to be quite simple.
I have a form called "Project Main" with a label called "Check". There is a sub form called "PM Main" with a button "Button1".
What I want to do is to have the label "Check" change color when the button "Button1" is clicked. The color change is record specific, so here is what I have done:
-Created a table [Updated] that contains the project number [ID#] and a yes/no field [PM Updated]
-Now I need to be able to change that value (yes/no) when the button "Button1" is clicked.
-Then I need to have the main form "Project Main" check to see what the value of the [updated] table is.
-Then I need to have code to update the color of label "Check"
Does this make sense or am I making more complicated than it is?
This might be simple but I just can't figure it out.
I have a table that has a number field. Everytime I enter the number 1.50, it changes to 2. I would like to keep the 1.50. Somehow, I can't get this right. Is there a setting that I have to change? Would I need to make setting changes on the form portion also?
I have been working on this for awhile, and can't figure it out for the life of me!
I have a form set up with a drop down box that lets me pick from values from a table based off of the Primary Key of that table (Row Source = SELECT Order.OrderID, Order.OrderName from Order). I have a button on the form that I want to set a value (Closed) from the table entry based off of the order selected.
Pseudo code would go something like this.
Closed.Value = True Where Table.Order.OrderID = SelectedOrderID
Table.Order is a Table Named Order (obviously) Closed is a yes/no field in my Order table OrderID is the primarykey of the table Order SelectedOrderID is the drop down box.
I, unfortunately, have been singled out as the Access guru in my work area. We have 223 people and the Information Manager has tasked me to modify a database he "found" to be able to track a number of things, but most important to him: performance reports.
I have posted the sample of what I currently have. What is being asked of me is a way in which to have a button or by double-clicking a block where a date would go for all other dates on the form to become non-visible while the current date stored in the computer the database is being worked from be entered in the block where the button or double-click happened. All this links to a report for the IM to be able to track what performace reports are out, and when they are due back to his section. He also wants me to be able to show which are overdue and where they are at. I am not sure if it is at all possible, but with me having spend most of last week purusing the articles on Access here, I know now that nothing is implausible if you happen to go about it the right way.
Since I have read the rules on posting, here is what I have done. I searched the forum for command button and got a lot of really cool ideas to use elsewhere in the database. I looked up the help in the program itself for command button, and got some good information on how a command button works, but I cannot make it put a date into a block. I can enter the date in any block that is a date format, but then I have dates in every block. He only wants to see the most current date in any of the blocks.
Any assistance at this point would be appreciated. If I have missed something in another thread, I apologise in advance.
A couple of weeks ago I asked the question of how to send a single record from one table to another (Archive table) using a command button. I got a response. I have had time to work with this a little. My problem is I keep getting a error message "Run-time error '3075'; Syntax error (missing operator) in Query expression "[New ID]='. I wanted to mention that the archive table has an "archive ID" field as well as "New ID" that links the tables. I have the following code. Please help with this if possible.
" Private Sub Command667_Click() ' Save the main record if it has not been saved. If Me.Dirty Then DoCmd.RunCommand acCmdSave Me.Recalc End If
If MsgBox("Do you want to archive this record?", vbYesNo) = vbYes Then Dim SQL As String
' Move main record to Grants Activity Archive. SQL = "Insert into [Grants Activity Archive]" & _ " select * from [Grants] where [New ID]=" '" & Me.ID & "'" CurrentDb.Execute SQL Me.Recalc End If
End Sub "
The error seems to refer to the & Me.ID section. I have tried putting Me.New ID and also Me.Archive ID. The Grants Activity Archives is the subform where I want the record to go. This subform is set up like a form with many fields so it is a lot of work to type the main record from the Grants table to the Grants Activity Archive table every time you want to archive a record. I hope that makes sense.