I saw the solution to this on this forum a while back but no matter what I search under I cant seem to find it again!
Can someone remind me how to change the Title of the error message boxes I can change the error message - by changing the Err.Description - but how do you replace the 'Microsoft Office Access' with your own Title?
I am running Access 2003 on XP.
hello
is it possible to change the default primary key error message that appears when a duplication of the primary key is made in a form?? in other words how can i make those error messages more user friendly??
thank you :)
Hi its me again.
i have an other table issue.
I have some required fields.
When a user fills in a form, i and forgets a required field, an error pops up. But i want to change what the error says. I tried getting it by using validationrules. but i can't reach it. The access message overrules mine.
Hi,
First post in this forum. I am using office 2003 pro. I have an Access database that I would like to change the title of. I would ilke this change to be applied to forms, reports and tables. I have done this in the past but can't recall how to do it.
I would be grateful for any assistance.
Martin
Is there and possiblity to have a pop up message box asking for password when changing file extension from accdr to accdb ?
View 6 Replies View RelatedDoes anybody know what this error message refers to?
"Reserved Error (-1517); there is no message for this error."
It just started happening today, and I haven't even made any changes to the database. It occurs when I hit a button I have to run a macro.
the macro does the following:
1) Shows all records
2) Requery
3) ApplyFilter.
The Where Condition for the filter is:
Right([tblContracts].[JobNum],4)=Right([Forms]![FrmContProc].[txtFindJobNum],4)
The weird thing is that it only occurs if the Form window is taller than 1/2 of my viewable area. If the Form window is 1/2 the viewable area or shorter, it works OK. This was running fine earlier today, but about 4:00 pm (03/31/06) this started happening.
If anybody knows what this error means, or how to get rid of it (I really need to use this window in full-screen) then please let me know.
-Thanks, Sean
Hello All,
I have been developing my database all one seems to be well exept for an error message which is attched.
If anybody can help me trap this error or offer some advice i would be greatfull.
Alastair
While going to the design mode of a form, I regularely get the following message :
Microsoft Access can't run the macro or callback function 'fDesign'.
In my Dbase there is no macro with that name.
Can anyone tell me what this messages means and how to get rid of this thing.
Running Win XP, Access 2003 Sp1
I have attached a screen print of an error message I recieved on my access database. I finally got it to come up, but only after a few pop up boxes with this error message.
I do know the shared drive it is housed on went on the fritz. So I copied it and pasted it to my desk top. Grrr...I thought this message was due to the flipping shared drive. But now, I recieved it on my desk top too.
Anywho...can someone look at it and tell me what it means.
Thanks alot.
PS, i know my desktop has to much stuff, so don't go there. ;)
Hi can anyone help i keep clicking on a qry and it comes up with this message "Syntax error (missing operator) in query expression 'tblSTSLimits.Max Short'. but Max Short is correct can anyone help
View 1 Replies View RelatedHi all,
I face a problem while openning a form.
It gave me this error message:
The expression On Load you entered as the event property setting produced the foolowing error:
User-defined type not defined.
What to do?
Sorry for bothering you.
Thanks & Regards
Mark K.
I get an error message when I open access 2003 database "database contains a missing or broken reference to the cacview.ocx version 1.0
All help so far says to go to tools>references.
My tools in the help menu does not have references
anysuggestions
I have a table that keeps crashing. The only error message I get is "Invalid Argument". Each time, a single record will turn into "#Error". Each field says this in the row. When this happens, Access won't let me delete just that row,
Any ideas how to delete them?
I am getting the following message:
"you tried to execute a query that does not include the specified expression qryMaxDays.Days Between 0 and 50 as part of an aggregate function."
I have other queries just like this and they run with no problem. any ideas? :confused:
SELECT Count(qryMaxDays.Days) AS [Number Of], qryMaxDays.Days
FROM qryMaxDays
GROUP BY qryMaxDays.Days
HAVING (((qryMaxDays.Days) Between 0 And 50));
I am trying to Right Join two queries which are basically from the same exact table, but when I do that I get the following error.
ODBC--called failed.
[Microsoft][ODBC SQL Server Driver][SQL Server] The column prefix 'MS1' does not match with a table name or alias name used in the query. (#107).
The following is a copy of my SQL
SELECT PqryExpiredPolicy.Policy_Number, PqryExpiredPolicy.Orig_Exp_Date, PqryExpiredPolicy.Insured_Key, PqryNewPolicy.Policy_Number, PqryExpiredPolicy.Name
FROM PqryNewPolicy RIGHT JOIN PqryExpiredPolicy ON PqryNewPolicy.Insured_Key = PqryExpiredPolicy.Insured_Key;
I have looked for this MS1 and cannot find it. Any ideas where I should be looking or what this means?
I get the following error message when I open a form, but I cant see anything wrong:
Run Time Error '2447':
There is an invalid use of the . (dot) or ! operator or invalid parenttheses.
This is the code that causes the problem:
Private Sub Form_Activate()
If Me.SumOfTotalGVS > 16 Then
MsgBox "You have exceded the total amount of GVS on the CATT site"
Let Me.SumOfTotalGVS.BackColor = 255
Me.SumOfTotalGVS.ForeColor = 65535
Else
Let Me.SumOfTotalGVS.BackColor = 16777215
Me.SumOfTotalGVS.ForeColor = 0
End If
End Sub
Can anyone tell me what is wrong with this line of code please. Im trying to count the number of records on another form that is open. This is an On_Click command from another form.
Me.lblCount.Caption = "You have " & Forms![Armour_Selection].RecordCount & " Armoured Squadron(s)"
Hello all,
I have an access application. I imported a form to it with all related tables and queries and modules from another application. Unfortunetaly, it didn't work.
It gives me this error message when openning the form:
The expression On Load you entered as the event property setting
produced the following error:
User-defined type not defined.
Sorry for bothering you.
Thanks & Regards
Mark K.
Hi folks,
i have a form that allows me to save mobile phone details.
The problem with this form is that if its incomplete and i click 'x' it shows me the validation message followed by an error message (which is attached with this thread).....
why is that? is there anyway i can exit the form (incomplete) without the valdation message or error message occuring???
Function Age(varBirthDate As Variant) As Integer
Dim varAge As Variant
varAge = DateDiff("yyyy", varBirthDate, Now)
If Date < DateSerial(Year(Now), Month(varBirthDate), _
Day(varBirthDate)) Then
varAge = varAge - 1
End If
Age = CInt(varAge)
End Function
I get # error in the field. Help?
I get this error when I try to run a query. I have attached a screeen print of the problem. Every thing else works just fine it is the same query I copied it and just change one of the fields. the other query orks fine.
View 1 Replies View RelatedCan anyone help me wit tis error message,
When i try to add in new things, it appear...
Server object error 'ASP 0177 : 8007000e'
Server.CreateObject Failed
/admin/cd_add_action.asp, line 11
Ran out of memory
hi,
the below scrip was taken from another forum member.
i have put this in the Forms / error VBA
but i still a little lost
i have set 3 fields to be indexed not to allow duplicate information (Forename, Surename, DOB)
i was then advised to error trap so it would highlight that i have enterd a duplicate record on typing in the DOB (As that as third feild to be entered)
so i then used the below script, however this doesnt highlight that it is a duplicate it just doesnt let me go on to the next record, the only time the error message is highlighted is when i go into design mode.
anyideas on where to go from here.
Private Sub Form_Error(DataErr As Integer, Response As Integer)
If DataErr = 3022 Then
Response = acDataErrContinue
MsgBox "Tis MerID alredy exist!"
Exit Sub
End If
If DataErr = 2169 Then
Response = acDataErrContinue
MsgBox "Tis record will not be saved!"
Exit Sub
End If
End Sub
I have an Access project that when it starts, lets you pick a folder and a file to open as input (done with VBA code), and that works beautifully. My project then processes the opened file and that works fine also. However, when I run the project a second time, pick another file (with the same format), my project then dies on me. If I get completely out of my project and thenre-enter it, it runs fine. I've enclosed a screenshot of the error I'm getting.
Any help is greatly appreciated. And yes, I did a search on this and several other forums as well as on Microsoft's site and could not find anything related to the error I'm getting.
I receive a message as follows
ODBC call failed
[IBM][iSeries Access ODBC Driver] SQL data type argument out of range (#30030)
what to do ??
Can anyone tell me whats wrong with this line of code?
DoCmd.OpenReport "rptOverview", acViewPreview, , "WHERE [CarID] = " & Me.cboCar.Value
I'm getting a missing operator error (3075)
..its supposed to open a report based on what record the user selected from a combo box
thanks