Report repeats the SAME chart for each value on the x-axis (i.e. x-axis is the date and same chart repeats for each month). The chart on the first page is correct and is the only chart I need. How can I change the settings of the chart so the report is the first page???
View RepliesI have a query written that has two numbers. One is the trucking fleet size (63) and the other is the average number of trucks used over a time period (in this example, its 52.2)..I just want to create a pie chart that has 52.2/63. so the pie would be roughly 90% filled.
View 2 Replies View RelatedI don't seem to get it right to use a chart in my reports from a query.
See attached database. I want to create a chart in the report to give visual feedback to the user.
We have a chart that is showing jobs by customer. I'd prefer it be in a pie chart but it's way too many to read. We changed it to a bar which is much easier to read but it displays the percentages as 100% for everything.
View 5 Replies View RelatedI am working on a project that is requiring me to hide a subreport that happens to be chart graph, when the chart has no data and my problem is that I cannot seem to get the report to properly hide and show the label behind it when the data is not there. I am in need of a SQL code that will read my blank record source as a zero instead of blank. I have tried Nz, IsEmpty, and IsNull and none of them seem to work.Here is the current SQL code:
SELECT DISTINCTROW Sum(Case_review.ID) AS SumOfID
FROM Case_review
WHERE (((Case_review.[Type of Issue].Value)="Clinical"));
Here is the current VBA code (which is in event on load) for the main report:
If Me.Rpt_Clinical.Report.HasData = -1 Then
Me.Label29.Visible = False
Me.Rpt_Clinical.Visible = True
Else
Me.Label29.Visible = True
Me.Rpt_Clinical.Visible = False
I am trying to run simple query make a chart in report through this query but its not generating chart?
SELECT [Unsafe Act Unsafe Condition].[Inspection Audit], Count([Unsafe Act Unsafe Condition].[Inspection Audit]) AS [CountOfInspection Audit]
FROM [Unsafe Act Unsafe Condition]
WHERE ((([Unsafe Act Unsafe Condition].Date) Between [Forms]![frmSafetyReportOut]![startDate] And [Forms]![frmSafetyReportOut]![endDate])) OR ((([Unsafe Act Unsafe Condition].Department)=[Forms]![frmSafetyReportOut]![cboDepartment]))
GROUP BY [Unsafe Act Unsafe Condition].[Inspection Audit]
HAVING ((([Unsafe Act Unsafe Condition].[Inspection Audit]) Is Not Null) AND ((Count([Unsafe Act Unsafe Condition].[Inspection Audit])) Is Not Null));
I have created a report using a query. Further to this, I have added some fields from the query into the report which calculates the sum of records and the count of records.
My problem here is, using the chart wizard, I am only able to select the fields existing in a 'Table' or a 'Query'.
Can anywone help me to create a Bar chart / Pie chart using the fields in the report? :confused:
Colm and Baxter, you've been great helps to me so far, and I will include you in the special thanks in my programming credits. I ask your help once more-
My program tracks how many calls are received per day at the office. I have a report showing a chart (thank goodness for wizards ) that lists the calls per day. This all works fine, and I was extremely proud of myself for doing so. However, after thinking about it, I realized that after a while, my client might not care to see ALL of the calls per day ALL of the time, and might wish to see maybe a week's worth or a month's worth at a time. I was thinking I could solve this by using a form to enter "from" and "to" information, but I'm not quite sure how to apply this so it would work with my report.
Also, if I can get this to work, on this same form I would like to have an option field that the user can select so that the usual options (today, this week, this month, this year, all) require only a click, rather than having to figure out what days are in this week (a tedious task, I know, but we're going for efficiency here ) but they also have the option of seeing specific dates they want.
The fields that I'm using for this are very simple- tblCustomer.CallDate and tblCustomer.LeadType, where CallDate is just a date and LeadType is a string from a lookup table that is either "Call-in" (the one I'm tracking) or "In-field".
I know this sounds like a lot of coding, but I'm sure if you could get me started, I could figure out the rest myself. It's just that the way Access does dates is so confusing to me, and I have midterms coming up and not a lot of time to figure this out by myself from scratch. Anyways, thanks for your help in advance!
Jason
linking a report and a subreport (chart). I have uploaded my sample DB. I'm trying to chart all the individuals and three fields for each Home. Both report and subreport are using the same query for the record source. My charts are blank "All_Homes_Individual_Totals". Just use date range 05/01/14, 06/24/14 on my Main form page for the data.
My second question is how would you create a chart to pull by each individual with their monthly totals per Home using "qry_Community_ Inclusion_ All_Homes" with a report and subreport (chart) as above. Report would show the individual's totals by month for each home.
How can I create a chart to be added to the last page of an access report to summarize all the data reported?
View 1 Replies View RelatedI have problem that my chart in report cannot display values in "percentage" as it is in query no matter what.
Sample is in the attachment.
I am working in Access 2010, trying to create a report with a pie chart. The pie chart is based on a query (called Count Pie) that calculates three values:
% IS
% NetInf
% IS + NetInf
I go into Create, Report Design and get a blank report in Design View. I select Chart from the Controls tab and follow the Wizard to specify the data source.
I get a pie chart with the right title (Count Pie). I double-click on the chart to open the report Datasheet and insert the correct value names. My pie chart in Design View looks correct. It has the right title and legend, and shows three slices of the pie corresponding to the three values.
I save the report, and go to Print Preview, where I get a pie chart that looks like a single circle; it has no legend, and doesn't show the three values.
Do I need to have the Access 2010 application re-installed?
I have data in a chart over four groups that are just labeled A, B, C and D in the underlying data. The table wants to label the x-axis of the chart SumOfA, SumOfB, SumOfC, and SumOfD. Ideally I would like to drive these labels by text boxes on a form, but I can't even figure out how to change them manually. I got to the data table in the chart designer and changed them there, and they'd show as changed in design view, but then they weren't changed in report view.
View 5 Replies View RelatedI am having a terrible time getting this to work. I have a mainform that contains 11 multi-list boxes. That mainform when I select whatever I want in any of the 11, select all items in each of the 11, or select nothing and click my show results works great. In my detail section it displays the information it should. I need to now take that and put it in a report with a pivot graph. I created a subform that is my pivotgraph and the reason for a subform is the end-user still wants the ability to filter more should they choose.
In addition, the regular graph you can put in the report does not allow me to put in multiple items. For instance I need to have sumofmbrstargeted and sumofmbrsconverted in the values and it will say I can only choose 1 value and then it will say up to 6 items and I have a 8. So, I opted for a subformpivotchart. If I create the following code, the subform updates based on the filters on this mainform everytime. Works like a charm.
Code:
Private Sub cmdGetGraph_Click()
DoCmd.OpenForm "Graph", acFormPivotChart, , GetFilterFromListBoxes
End Sub
The problem is, I want the Graph in my Report. If I take the Report and do the same basic thing:
Code:
Private Sub cmdGetReport_Click()
DoCmd.OpenReport "Search", acViewPreview, , GetFilterFromListBoxes
End Sub
It asks for the parameters again. Example, LOB, Plan, Prod_NM. I tried just disregarding the report and created yet another subform for the reporting piece and embedded the graph and that still asked for the parameters. It works great for the subform as the graph and I want to have the ability to use the GetFilterFromListBoxes, apply it to the Search Report with the embedded Graph.
I have a popup form that prompts for a value and has a button defined with an OnClick,OpenReport with a WHERE clause. The value the user enters is placed in the WHERE clause.
The report is generated using a Query and the WHERE clause.
I was very surprised -- it works!
Now I'd like to add a chart to the report that represents the information on the report. How can I do this without calling the query again? Can I somehow reference the information that's in the report?
I am having an issue with viewing a report. I have a button set up to show the print preview of the report. There is a chart based on the report's record source, and two sub-reports showing related data. The print preview section however shows the the chart area where it would appear is blank, i.e. there is a white area where the chart should go. There is no error message. The two sub-reports appear correctly. If I go to print the report, however, the chart appears, and it will also appear if I change the view type (e.g. to layout and back again).
View 7 Replies View RelatedI have a bar pivot chart made in a form this load fine, I have the below VBA code in place to control the bar color depending on what the bar show.
Set frms = Forms![OtherCases created by Indv by Month chart].Form.ChartSpace.Charts(0)
Dim i As Long
With frms
For i = 0 To Forms![OtherCases created by Indv by Month chart].Form.ChartSpace.Charts(0).SeriesCollection.Count - 1
With .SeriesCollection(i).Name
Select Case Forms![OtherCases created by Indv by Month
[code].....
When I then open the Report this is not working at all each bar just get a random color regardless what the bar show.how to convert the above to fit a Pivot chart form a form that is displayed on a report.
I have created a database that tracks production by individuals. I have also created a report which includes a pivot chart to give the user a chart view of production.
In the pivot filter of the chart I have associate names, where the user can click all, or individual associates, to see individual production.
The trouble I am having is when the user goes to print the chart, it will only print the chart with the "All" filter view. Even if the pivot chart is filtered to one associate, it will print like "All" was checked.
Is there a way to allow the report/pivot chart to only print the production for the individual who is checked within the pivot filter?
I've got a report, which on the screen is three chrts and a page break in between. Page is set up to print landscape.
When I print the report or save to pdf it adds a lot of pages in between 2 and 3. It seems to be of chart no.2 getting smaller and smaller. I've attached a copy of the pdf so you can see what I mean.
its doing this on all my reports.
I have a query that has a field that reads DateReceived By Month: Format$([Workorders].[DateReceived],'mmmm yyyy') The criteria line is Like "*" & [Enter Month & Year (Leave Blank for all)] & "*" And this works when I run the query. If I enter october 2013 it shows only records for this date range like it should.
Then I built a bar chart report that will show the workorders only for the month entered. The problem is, If I leave this field in my query the chart does not update . When I open the chart it will prompt for the month and year but the data in the bar chart doesnt change. If I remove this field the chart updates as expected.
If I go into design view for the report and then right click on the chart and go to properties , then to row source, it reads as this:
TRANSFORM Sum([Workorders Query2].MyTime) AS SumOfMyTime SELECT [Workorders Query2].SerialNumber FROM [Workorders Query2] GROUP BY [Workorders Query2].SerialNumber PIVOT [Workorders Query2].[MXDPrinter];
If I click on the elipstical to go into query tools for this line , and click on run I get the error : The microsoft Access database engine does not recognize '[Enter Month & Year (Leave Blank for All)]' as a valid field name or expression.
So my criteria runs normally in the query and returns the correct records, but I can't get it to work in the chart .
I like to open a report as a pivot chart from my query. How to open a report by making the default view of report as pivot chart?.
I am able to manually create a pivot chart by clicking pivot chart view from the sql view in a report. Then I pull in the required columns to the x axis and y axis and a graph is generated. I do not know how to save it and open the report by default in pivot chart view every time I click a button.
I am trying to use this query. It gives me correct results as query. However when I make chart with query on a report it doesn't show correct data and eventually stops making chart
SELECT qry.txtRC, Count(tbl.txtRC) AS CountOftxtRC
FROM tblMain AS tbl, qryRC AS qry
WHERE (((tbl.txtDepartment)=[Forms]![frmRC]![cboDepartment] Or [Forms]![frmRC]![cboDepartment] Is Null) AND ((tbl.txtZone)=[Forms]![frmRC]![cboZone] Or [Forms]![frmRC]![cboZone] Is Null) AND ((tbl.txtRC )=[qry].[atnRC ID]) AND ((tbl.date) Between [Forms]![frmRC]![startDate] And [Forms]![frmRC]![endDate]))
GROUP BY qry.txtRC , tbl.txtRC
HAVING (((Count(tbl.txtRC )) Is Not Null)) OR (((Count(tbl.txtRC )) Is Not Null))
ORDER BY Count(tbl.txtRC ) DESC;
I am having trouble creating a chart within a report. Let me start off by explaing my report.
I have many unbound textboxes on my report that all have the code very similar to this:
" =Count(IIf([Complaints Table]![Month]=1,IIf([Complaints Table]![Decision - Our Favour? (Y/N)]="Y",0))) "
This basically gives a count of for a specific month. There are twelve rows of text boxes and two columns. There is a query applied to the report to input the year, as this is a yearly report.
What I want to do is link a chart to each and every text box to show the data in an easy to view format. But I can't seem to figure it out, and I've had no luck on the web .
I know how to create a chart in an access report, put it in the group header or footer and link it such that the the grouping filters the chart.
My VP wants me to create a chart that compares each invididual providers episiotomy rate (something that is done to pregnant women during delivery) to the overall divisional rate on a monthly basis.
I know how to do this with 2 charts, ie 2 different group levels. One chart goes in the date grouping level (the overall rate) and another goes in the provider grouping level (the individual provide rate).
is there a way to have this in one graph in an access report?
I have a table that shows "DONE" and "REMAIN" for each "AREA" like below:
Code:
AREADONEREMAIN TOTAL
AREA1100200300
AREA2200300500
AREA3200700900
Now I like to make a report that shows "DONE" and "REMAIN" in each AREA with pie chart, now I have problem how I have to do this job for the graph, how should be "row source" of chart control. What query needs on this table?
I've got a simple dataset that will ALWAYS have 4 rows, against which I have assigned the colours Green, Amber, Red, Grey. So I made a simple pie-chart to go on the report, but I can't work out how to assign the same colours.
Please see 3 attachments showing the current layout, the preferred layout (which I mocked up in Excel) and the chart settings screen.
The chart is working OK i.e. 4 slices appear and they are the right size, but when I open the chart, I see only East, West, North. So I am unable to manually set the colour for the 4th slice.