I have a data field (status) that is either Graduated, Terminated, or Current. I also have a report that has a check box representing each (such as a check box for graduated and another for Terminated etc).
I am trying to get the report to read the status and check the appropriate box in the report.
I have tried this in the control source of the checkbox
=IIf([status]="terminated";True;False)
but this does not work
I have also tried this on the OnOpen
If [status] = "terminated" then
termcheck = true
else
termcheck = false
end if
end sub
But this does not work either - what am I doing wrong :confused:
I have a form (Access 2010) that we use to keep track of client data. When I enter a number equal to 6 or above in one field (Client Rating and this field is actually formatted as text because it could be 6 or 6a, b, c or 7 or 7a, b, c, etc), I want anything =>6 to automatically check a box in another field which is the Watch Indicator box (a yes/no box), how would I do this?
I tried to create an expression like the below on the Watch Indicator check box and it does not work - not sure why - it did not say it was incorrect, I think I may have it in the wrong place?
I have a user input form to enter traffic counts. There is a subform within that form that shows the total. I want to have a check box which, if checked, will multiply the data in the box by two. I have tried building expressions, macros...nothing worked. Dont know what I'm doing wrong. Any idea?
I have created a user form that contains check boxes for various fields, and on this form, when the box is checked, I get a prompt that the field cannot be updated. I have several other forms that use these same yes/no fields, and I am not having the same problem on these forms. I checked the property sheet row source for the form and I don't see anything wrong with the select statement (that I know of).
Hello Folks. I can't seem to figure this one out in a continous form. I have checkboxes where I can check them. If I check any of them, I would like to disable another check box. All this works, but what it does is it disables/enables the check box in ALL the rows, instead of just the current row.
I have attached a sample of my setup. Any help/insight would be appreciated.
Hello Folks. I can't seem to figure this one out in a continous form. I have checkboxes where I can check them. If I check any of them, I would like to disable another check box. All this works, but what it does is it disables/enables the check box in ALL the rows, instead of just the current row.
I have attached a sample of my setup. Any help/insight would be appreciated.
I am trying to create a medical records inventory. We have physical charts which each have a barcode and I have a scanner. The idea is to have employees who want to check the chart out scan their barcode (on their badge), scan the chart's barcode and leave.
I have a table called tblCharts with the fields: ID (primarykey which is also the chart number), a checkbox, Employee ID, Date, and Time checked out.
I have Employee ID linked to my tblEmployees that simply has a listing of the employee ID's and first and last names. I don't care about keeping a record of who has had the chart in the past.
I just can't figure out how to tell the checkbox to be checked (to indicate the chart is out) when a number is added to the ID field (via scanner).
So here's how it would go:
Scan the chart's barcode which would populate into the ID field. Search to see if the record with the same number is already existing, if not create a record. IF it does exist, check to see if the checkbox is checked. If it is checked then the chart is being checked back in (so uncheck the box). If it is not checked to begin with (still in), then check it out and associate the employee's scanned barcode with it.
I have kept the names as simple as I can for the example sake to which I can substitute my names in after.
I have a split form - form1, I have a check box on this form - checkbox1 - That I would like to use to make only the checked results from the table - table1 - show and if it is not checked to show all the results. How would I go about doing this? The table field is called field1.
I'm currently making a signup form for a 6day event.
Certain details are taken (Name, Age, Contact no etc).
I also have a registration form; so when someone comes back for the second day of the event I tick the 'saturday' checkbox, or 'monday', or whatever the day is...
When someone comes to sign up for the first time, I'd like the form to automatically check the box for that day (to indicate their attendance). This would save me opening two forms to signup one person, if I make sense.
So, when someone comes to register on a Tuesday, I fill in all their details - and then it automatically checks the 'tuesday' field box.
I'm after a piece of code which works as described below.
I have a save button on a form
I have a append query ready to run.
When the save button is clicked, I want the code to see if a checkbox is true or not and if its true I want the append query to run if its not then I want the form to save and nothing else.
I have a form wich includes listbox of employees. When I click on them, it shows his or her data (date of birth,address,etc...). For every employee there are also three diferent checkboxes - if he is regularly employed, temporaly employed or student.So now what I need is to filter listbox of employees - only student or only regular or only temporar or all.I was wondering if I can do that with combobox, but I really dont know how. I am prety new to VBA.
I have a checkbox which when checked then turns textboxes to locked as below. However when I navigate to the next record which may not be checked the text boxes remain locked. I obviously want to lock the boxes depending on each record. I am navigating via the windows next/back record buttons. How do i do it?
Private Sub Check44_Click() If Check44.Value = -1 Then serial.Locked = True gain.Locked = True swst.Locked = True Else serial.Locked = True gain.Locked = True swst.Locked = True End If End Sub
I have a form that has a check box. If the box is checked then I would like the next field to be available for data entry, however, if the box is unchecked, then I wish for the next field to be grayed out and not available for data. I suspect that it is a simple bit of VBA, but I am not fluent in VBA and need help everytime, I find something new. Thanks for all your help.
I have a query that simply pulls back each tenant from a tenant table. Each row has a bit field that I use for check box's. This check box is true or false depending on the balance they owe. I currently use it to print off late reports and people that have this field set to true have a check box that auto populates on my datasheet.
I copied the query but I want to change it a little. I want to be able to show all tenants, but I want the bit field to show on my datasheet defaulted to checked for everyone (even if the table shows false) so that I can print all tenants without having to check the fields that are false in my table.
I tried to create an expression instead of using the bit field, but I no longer have the option to make that column into a "Check Box" under Lookup-Display Control.
I'm fairly new to using Access for any serious purposes. I'm trying to replicate some database functionality I setup in Salesforce and just trying to clear few core concepts in Access.
I'm messing around in the Contact Management template and I'm wondering how I can make it so when so when a yes/no checkbox field (called "Active") is ticked a date/time field (called "Last Date") is automatically set to today's date + 60 days.
In Salesforce I would create a Workflow Action triggered by an if Active = true statement, with a Field Update something like TODAY() + 60.
I can tell I need to create an After Insert/After Update Data Macro but can't quite figure out what to put in.
When a part number is set up in our manufacturing software, the user clicks a check box to mark the part as purchased. I'm creating a similar form and want to have a check box display the same information. The manufacturing database stores the check box as Y when checked and N when not checked.
I tried 2 different ways to add code in the BeforeUpdate but neither is working.
First Example:
if Purchased = "Y" then check295 = True else checkbox295 = False
Second Example
If Purchased = "Y" then check295 = -1 else checkbox295 = 0
What changes do I need to make to this code to get it to work? Thanks for your help,
I was wondering how to delete records that have been checked (through a checkbox) in a form...
Also, I want to add a record after the record that has been checked. I only want this ability to add records available if only one record is checked. Otherwise, if more than one record is checked, the "Add Record" button would be disabled.
MS ACCESS 2010,i need to create macro, on insert. which will send mail if is selscted specificed value in combo multivalued list.but, i cant access to that field to test it.
The DolphinBatchNo has number data type but the following sql statement doesn't capture the ight records. it doesn't check id dolphinBatchNo is blank.
Code: strsql="select * from `MasterTBL` where PolicyNumber>=" & TxtFPolNo & " and PolicyNumber<=" & TxtLPolNo & " and PolicyStatus='Live' and DolphinBatchNo is null order by PolicyNumber"
I am creating a training database and first I have tables in relationship to the courses:
tbl_Courses Course ID (Primary Key) Course Title Objectives
Instructors (lookup field allowing multiple instructors to be selected, meaning they are skilled to teach the course)
tbl_Instructors Instructor ID (Primary Key Last Name First Name Full Name (Caluclated to put Last Name, First Name)
[code]....
What I am trying to do on a form to create a new event is once the user selects the Course from the Course ID combo box, then I need the Instructor combo box to only display the instructors who are skilled to teach the course which are selected in the tbl_Courses.
I can get all Instructor ID's, but not the names and the class that has multiple instructors show on one line.Should I have not put the Instructors field in the tbl_Courses? Do I need another table for instructor skills or something?
tblTreatment contains Cost for different AppointmentTypes.
The above two tables are linked as 1-M relationship (1 Treatment can have Many Appointments)
Entering data in the tblAppointment - AppointmentType and AppointmentCost are the fields in tblAppointment. AppointmentType a drop down box, so that a specific AppointmentType can be selected.
Problem: Now depending on the AppointmentType selected the AppointmentCost field should automatically display the correct Cost.
