What I would like to happen is when either of the check boxes are checked it will either save the username and password or just the username, something like if you would log in to facebook and it asks do you want it to remember you log in details that's basically what I would like to have.
View RepliesI am new in MS Access programming and is trying to create a search form for all records based on selected dates and check box. I was able to filter the records by dates but can't find ways to filter the records that meet the dates to be filtered again based on the selected check box/s. Basically what I wanted to is display all the records within the selected dates and check box/s.
View 9 Replies View RelatedAttached I have a database that I've been working on which has a form called "frmCriteriaSearch". It is based off of the qryCriteriaListBoxUpdate query. I am trying to get the listbox in the second tab of the results section to work. It queries fine for the checkboxes, but I cannot get the comboboxes to affect the query (unless a checkbox has already been selected)
View 6 Replies View RelatedI am trying to make a search option in my form header. Right now I have two unbound combo boxes (CboAccountsfilter and cboCourseName) that I can use to filter my records. Currently, I can use the drop down for CboAccountsfilter and a list of accounts will appear. When I select one, the corresponding Course Names will appear in cboCourseName. This works fine...Code below. I would like to take the filtering a step farther and add checkboxes to filter the data. I my form, there currently exist several check boxes (yes/no)...(Priority, Rep Top Target, Manager Top Target, ect). I would like to have the option to use a check box to filter. I.E if I had a checkbox in my header called PriorityFilter, if checked it would only bring up those records that met the two combo boxes criteria and was a priority.
Below is the code I have so far...it doesnt have anything for the checkbox because I am at a lost of how to get started.
Private Sub CboAccountsfilter_Change()
Me.Requery
Me.cboCourseName.Requery
Me.Check178.Requery
End Sub
[code]...
Hi,
I added some new controls into existing form. I made sure I added those new control names to Table source as well. For some reason, I dont get the values either in the form or in table. Please help. Thanks.
By the way, how can I attach an attachment in this forum. This if first time for me in this forum.
I just spent all day redesigning a form and putting in check boxes from the tool box, but when I saved the whole thing and tested it by clicking in the check boxes to put the check marks in the boxes and then clicked save, it did not save the check marks! AARGH! When I went back to the form all the check boxes were empty. Why won't it save the check marks? Please help. Thanks.
View 10 Replies View RelatedI have a form with a check box among other itmes. What I want to happen is, when the user checks the check box, I want the text box to the right of it to be made visible and to let the user write text. But I only want this text box to be visible when the check box is checked. The check box is if the user wish to put a comment in the form, he will click the check box and then I want my text box to appear so that he may write the comment in the text box. Please help with this. Thanks
View 3 Replies View RelatedI have some code that resides in a button on a report that allows me to save a PDF version of this report. My problem is that if i have the destination directory open on windows explorer, i get a runtime 2501 "The output To action was cancelled" error.Is there any way to check if the directory is already open, and cancel the output to, or close the window to avoid this error?
Here is my code:
Code:
Private Sub CmdSavePDF_Click()
Dim MyFileName As String
Dim MyPath As String
'Dim CompanyName As String
[code]...
Hi
In my tables I have set a field to Yes/No and the format to be True/False.
When I activate the table it shows the field as a checkbox, however when I create a List Box on a form to that table it displays the fields as True/False, how can I get the list box to also display the field as a checkbox.
dave
I want to sum together the number of check boxes checked. The problem is that Sum gives a negative number. What shuold I do?
View 2 Replies View RelatedThis seems like an easy question.
I created a check box on a form. The problem is once the box is checked, it cannot be unchecked. Seems like there should be some validation running in the background that checks the state of the check box.
I have the value of the check box to equal 1.
If the field is null, then clicking on the check box assigns the value and turns on the check mark.
If the field is already 1, then clicking on the check box deletes the value and unchecks the box.
Can someone provide me with the vba code that makes the check box operate correctly? I appreciate your help.
Thanks,
Jeff
Is there a way to make sure that one of two box is checked. And if one is checked the other could not be. For example. If I have a check box called Father and one called mother. If father was checked Mother could not be checked, and visversa.
Thank You
J
If a check box is true/checked, how do I make it invisible on a report?
Any help is greatly appreciated.
Filipina
I have 4 check boxes represent 4 grade levels. When I click on a grade I have a query run for me a list of all 9th graders or 10th graders or both together.
When I run the form for the first time, all four boxes are check, when I unclick all of them and I click which ones I want the form does not work. But if I leave them click the report will work. Basically what is happening is when I unclick them, the lose their value.
I have the check box set up with a Default Value as "09" or "10" base on what Grade Level there is.
So my two questions are, how do I keep the value of the check boxes after I unclick and click again and Secondly, is there a way to have the boxes unchecked when I run the program?
I have a column which are check boxes to indicate whether plants are available for sale or not. The problem is how do i put code or symbol in to check all boxes or to uncheck all boxes.
View 4 Replies View RelatedI have a table that contains the following fields:
township
male - yes/no
female - yes/no
number of kids
I need to create a query that will give me the count of males and females and sum of number of kids - all grouped by township.
I have created 3 separate queries that calculate each part and they work. My question is how do I display the results of all these queries in one report, all grouped by townships?
Or if there's a way to create one query that will add all of this up? when I tried to create one query, the check boxes were not calculated properly, because Access did not distinguish between filled and empty checkboxes and would just count them all...
Any ideas or suggestions would be really appreciated.
I was just wondering if there is any way that I can create a query to find all of the records which have a tick box checked.
There is a tick box on each form and I want to know what I type in the 'Criteria' box is Query Design so that I can quickly and easily search for all those which are checked.
I know that in a normal query, to search for a particular object you can type it in (e.g. 'Mugs' - will find all the records under the name of 'Mugs' when typed under the right heading) but i'm unsure of what to type in under the 'Target' heading to make it find all those which are checked.
Any ideas. . .
I have a form I am creating from a query that has numerous yes/no checkboxes. I have been able to enter over 2/3rds of the yes/no boxes. However, I'm trying to enter the last of these into the form, and they suddenly change to text boxes. When I go back and check the query, they have also changed to text boxes there as well. I've checked and re-entered the data from the table to the query and finally to the form again. Same thing happens everytime. Any idea what's going on here?
Thank you ~
hi guys
i have 2 questions
1.
how can i count selected or not selected checkbox fields (yes/No) in a tex box ?!
( for example we have a 2 yes/no fields that are Male and another Female , and i want to make a form that shows number of males and number of females that selected in a text box )
2.
how can i make a search form that when i chose check boxes and then Search button it will show me the list of selected checkbox that selected in main form
( for example if we have 3 checkboxes 1.(low) 2.(mid) 3.(high) in main database and form , and if i want to make a search form that shows me list of enterees that is (Mid) )
thanks alot
Good Day Everyone :)
I appologize that this may be a very remedial question, and that many previous threads pertained to the general topic of check boxes, but as I am new to the world of access, I did not find any threads which i could apply to my following question.
I would greatly appreciate any help and guidance :)
What I am trying to accomplish is to set up a subform in which each record is linked to a check box. The check box would be used to select unique records for an upcomming search.
My problem: the check box which i have added to the subform (from the toolbox) is linked to all of the records. That is to say that when I check one box it checks all of the all boxes as well. :eek:
Is there any SQL language which i should be applying here?
Suggestions are much appreciated :)
Thanks a million in advance,
~ N' Take care ~ :)
Hi All,
I have a form with a series of check boxes (see image below). The check box is always in the top left had corner and is very small. Does any one know if it is possible to:
a. Have the check box in the centre
b. Enlarge the check box, so the tick itself appears larger
13770
Cheers,
Aaron
what if i dont want a user to be able to select check box 2 if check box 1 isnt select
View 7 Replies View RelatedHello Folks.
I can't seem to figure this one out in a continous form. I have checkboxes where I can check them. If I check any of them, I would like to disable another check box. All this works, but what it does is it disables/enables the check box in ALL the rows, instead of just the current row.
I have attached a sample of my setup. Any help/insight would be appreciated.
I have a check box on a form. when the box is check, that means "yes" when it is unchecked, it means "no".
i have two reports, one that is a snapshot and one that is converted to microsoft word. in On the snapshot report, i am able to display the checkbox. on the report that is converted to microsoft word, i am not able to include the check box, becuase the checkbox will not convert to word on the report. to fix this, i changed the "yes/no" field on my table to a text box, instead of a check box. so now my table would display a "yes" or "no" depending on if the box was checked on the form. I figuered, that since now, the tables were showing "yes" and "no" i could just include a field on my report that would show "yes" or "No" for the word report. But when i did this, for all the records that are "yes" the field displays "-1" and for all the records that are "no" the field displays "0" how do i get my report to dislplay "yes" or "no" if the box is checked or not?
Ok I can't wrap my brain around this for some reason. I'm still learning access so there are a lot of things I'm trying to figure out.
I have a form that has a check box section to check off the days of the week. But for some reason they all stay checked when I move to the next record. How can I fix this?
Hello Folks.
I can't seem to figure this one out in a continous form. I have checkboxes where I can check them. If I check any of them, I would like to disable another check box. All this works, but what it does is it disables/enables the check box in ALL the rows, instead of just the current row.
I have attached a sample of my setup. Any help/insight would be appreciated.