Hello,
I have a table with a yes/no field and on the form i have a checkbox that refers to that field. I am trying to count the number of records where that box is checked. This is the code i have so far
Code: Dim rs As Recordset Dim db As Database Dim i i = 0 Set db = CurrentDb() Set rs = db.OpenRecordset("Listings") 'table im pulling from rs.MoveFirst Do Until rs.EOF If me.Check137 Then i = i + 1 End If rs.MoveNext Loop MsgBox i
When i run the code, the check box returns a value of -1 for each run through the loop. Out of 900 records, i only have 4 of these boxes checked and they arent being counted. Instead, it returns a value of the number of records in the table. Am I missing something simple here?
I want to check a listbox value (the listbox is in the parent form) after updating a subform field to see if the listbox value is greater than 8.5 after updating. If it is, I want an error message to pop up and I want the field that the user is on cleared.
I think I might be referencing the control from the subform incorrectly:
In my application I have the option of selecting different check boxes (6 different options). My database is storing the values 0 and -1 for nonchecked - checked boxes as it should be.
Now, I would like to create a report to display which values were selected from the options above but I don't know how to do it as if I display the values, I will only get -1 and 0.
Is there a way I can convert again or I can give the check boxes other values in order to be able to report them with their original names ?
I'm certain this question has probably been asked before, but I can't seem to find it!
I have a form field called fldTitle, and want to ensure users write something that is meaningful by evaluating words within the title to a table of keywords (tblKeywords). I know how to write the IF/ENDIF and the other stuff required, but am struggling to find the right commands to do the comparision. Could someone help me out?
I have a bit of code that uses controls on a form to batch add records to the tables. Before the code executes, it needs to do a check to make sure that all of the needed data has been supplied.
Code:
If IsNull(txtDateAdded) Then MsgBox "Please supply the date that the Label record was created" Exit Sub Else If IsNull(cboRecordCreator) Then
I have got like subform which I think is the tech term I use it to filter dates on field "date raised" and open's a report depend on date's entered in txtstartdate and txtenddate it works perfectly but I need to add some check boxes to check other field's are true/false ...
Code: Private Sub cmdPreview_Click() Dim strReport As String Dim strDateField As String Dim strWhere As String Dim lngView As Long
[Code] ....
I need to add code to the text in red well I'm guessing
here goes with what I would like to add job cancelled1 check box name field name= job cancelled job on hold1 check box name field name = job on hold void property1 check box name field name = void property
E.g. if I put date range in my date boxes and tick job cancelled show all record in that date range cancelled same with job on hold and void property
here some code I did but wont work as it not in the same strwhere above
Code: if me[job cancelled1] = true then strwhere = [job cancelled] = 1 'field name else strwhere [job cancelled] is null end if
Some how need to add the strwhere to the code above ...
How do I suppress the numerical values from being displayed on the "yes/no" check boxes when a user clicks directly in the field, instead of clicking the arrowhead as they should?
I have the following VBA code that auto populates a word template:
Private Sub Command24_Click() On Error GoTo ErrorHandler: ErrorHandler:
[Code].....
The code executes flawlessy but there are three values that are based off check boxes set as YES/NO (EMPLOYEDATREGISTRATION, EMPLOYED and FRINGEBENEFITS). These values show up as -1 for YES and 0 for NO.
Is there anyway to add code to mine that would allow me to change these values before they are sent to the Word template?
I'm trying to write some Code with the target to take a value from a textbox (out of a form) and a pregiven value (in this case = 2) and enter them in a new record in a table. But only if there is not already a record with the exact same combination of these to values. When done, the same button should proceed you to the next form (but this code is not already implemented in the fragment below) even if no values are added because they already exist in this combination.
Code: Public Function GetID_PatientStudiesGroup&() GetID_PatientStudiesGroup = [Forms]![frm_PatientStudiesGroupTZP]![ID_PatientStudiesGroup] End Function Private Sub BPRS_T1_Button_Click() Call GetID_PatientStudiesGroup& Dim strSQL As String
[Code] ....
As you can see, I tried to use a function to refer to the value out of the form, because I didn't find out how to refer to a form in an SQL Code.
Just to give you a better overview: The table where the information should be added is named "tbl_PatientStudiesGroupTZP". The form where you find the Textbox "ID_PatientStudiesGroup" (with the value I need to transport) is named "frm_PatientStudiesGroupTZP". Every part (except the WHERE NOT EXISTS part) worked perfectly for itself, but not when thrown together.
I have a database used to manage teaching assignments (which kid is assigned to which teacher so to speak). I have this relationship defined through three tables, a teacher table, a student table, both with unique ID's. The third table is used to define the assignment. Also, the kid table has an extra GroupID. The group ID is what is used to define. So in the definition table, Teacher 1 is assigned to Group 1, and so on (though their may be 20 kids in group 1). When a new teacher is added to the teacher table, I need it to add it to the corresponding field in the definition table. The groupID is in the table as an Autonumber so that will populate automatically.
I need to appendTeacherID to tblassignment (TeacherassignmentID) and have only one occurrence of the TeacherID. So, if I have teachers 1-8 listed, each assigned to a group# in the tblassignment, and I add Teacher 9, I need it to add Teacher 9's unique ID to the TeacherassignmentID field without adding 1-8 again. I can't figure out how to "check" for ID's 1-9 and add only those I've added to the teacher list that aren't already assigned to a group.
I've tried a few different SQL queries append/select queries but nothing seems to do what I need it to do....
I have run into an issue with a basic DLookup. The database has grown in size and now we could have multiple entries, but I want it to return a certain one. So the information could be in it three times. Of course DLookup stops after the first one. How do I get it to loop to check the entire table? Someone mentioned to me to use a recordset, but how to write that as I have never used it before. Below is what I was using until this new request came up.
<code> Private Sub txtloan1_AfterUpdate() If IsNull(DLookup("[loan1]", _ "settlement", _ "[loan1]=""" & Me.txtloan1.Text & """ AND [status] = 'Open'")) = False Then Cancel = True MsgBox "Test", vbOKOnly, "Warning" End If End Sub </code>
This was also executing after the user entered the information within a text field. I did not want them to enter all the data and then have it come back as a duplicate.
In sheet 1, In column A all the Batch numbers are present. So I want to check if each of these is present in Access table named "tblmain". If its present then display its corresponding Policy number in Column B of attached workbook.
Basically, what's the best practice or how do we store a query's value into an array then checking what the max or min value is and how to check if let's say "4" is in the array?
I'm in need a of a check-in/check-out application for my company. We have about 550-600 employees at any given time and our turnover is about 20-30% per year. Our check-in/check-out process requires our employees to personally visit between 30-40 areas in our company (personnel, safety, credentials, parking, insurance, etc) within the first month of employment. This is currently done manually and is a huge drain on labor, especially when check-in sheets are lost, misplaced or, in some cases, forged.
I'm looking to build a database that would be intranet based, password secure (by check-in area) that would allow the new employee to present at a particular check-in, check-out site, complete that portion of the check-in/out process and then allow the person responsible for the check-in/out to enter the status into the database. At any point in the process, I would want to know the status of the person checking in/out (how long they've been checking in/out and what portion of the process have they completed).
Hi I have sendkey "{f7}" on loss focus. this works great as a spell check but then I get the mesage box that spell check is complete. How do I stop this box from occuring?
I have a report in which a textbox generates numerical values and letter values. I want to...On report load - if textbox = numbers then hide otherwise show if it contains letter values.
I'm using Access 2010. I need to calculate a score based on values selected in a table by looking up corresponding values in other tables. I have a "Project" form to create new entries into the Project table (see Table 1). When I create a new project record, I will select values for the Payback and Need fields by selecting options from a list. The Payback list is pointed at Table 2 and the Need list is pointed at Table 3. In the below example, I created the "ABC" project and selected "1 year" for the Payback field and "Repair" for the Need field. Pretty simple.
Now that I have the "ABC" project loaded to my Project table, I'd like to create a report that will show a "score" for this project. The score should be calculated as follows: Payback Impact + Need Impact. In this example, the score should be 30 (Payback Impact of 20 + Need Impact of 10).
I have the following dataset in a table called NR_PVO_120. How do i pick out a number (which can change but let's say, 6) of UNIQUE OtherIDs without excluding any OtherIDs under any fax numbers?
So, if you pick OtherID from Row7 you then also must pick OtherIDs from rows 8 and 9 because they have the same fax number. Basically, once you pick an OtherID you're then obligated to pick all OtherIDs that have the same fax number as the one you picked.
If the number requested (6 for this example) isn't possible then "the closest number possible but not exceeding" would be the rule.
For example, if you take OtherIDs from rows 1-10 you will get 6 unique OtherIDs but row 10 shares a fax with rows 11 and 12. You either need to take all 3 (but that will raise the unique count to 8, which isn't acceptable) or skip this OtherID and find one with a fax that has no other OtherIDs and that isn't on the result set already. My result of 6 UNIQUE OtherIDs will need to contain ALL OtherIDs under any fax the existing OtherIDs are connected to.
So one solution is to take rows 1-6, 26. Another is to take rows 1-4,10-14.
There will be many possibilities (the real dataset has tens of thousands of rows and the number of people requested will be around 10K), as long all OtherIDs connected to all faxes on the result set are part of the requested number (6 in this case) any combination would do.
A few notes.
1.Getting as close as possible to the requested number is a requirement.
2.Some OtherIDs will have a blank fax, they should only be included as a last resort (not enough OtherIDs for the requested number).
This is for a fax campaign, we need to make sure no fax number is faxed twice, that all people connected to that fax number are contacted under one fax sent.
In Access 2010 I have a Data Entry Form on which I have an unbound textbox in the header that the user can put a default date in. In the body of the form is a bound textbox that records the date and the default value is set as =defaultdatestat (obviously the name of the box in the header).
Problem: The default date shows up perfectly until a value is put in any of the other text boxes.
For further info : If you put values in text boxes default value disappears; if you then push escape the default value reappears when the values in the text boxes disappear.
I have a query with an INNER JOIN and ORDER BY that is working great. Now, using the same JOIN, I need to update values in one table with the values in another. I thought it would be simple until I learned you can't do an ORDER BY with an UPDATE. Is there another way to achieve the same result? If you remove the 'ORDER BY', the statement below doesn't produce an error but the results are not correct:
UPDATE TableA INNER JOIN TableB ON (Left(TableA.CDN,6))=(TableB.CDN) SET TableA.HCC = TableB.HCC WHERE TableB.HCC Like '241*' AND TableB.BBB = 'X' AND TableA.CCC = "1234" AND TableA.HCC IS NOT NULL ORDER BY TableB.HCC, TableA.CDN;
I have several result fields which are all drop down lists. I want each result field's drop down list values to be different depending on the selected value of the Test1 drop down list.I came up with using the .rowsource keyword. My syntax seems to be fine but I'm not getting any values under the result fields when I run the form.Here is my code so far:
Private Sub Test1_AfterUpdate() If Me.Test1 = "Stress Echo" Or Me.Test1 = "Stress SPECT" Or Me.Test1 = "Stress PET" Or Me.Test1 = "Stress MRI" Then Me.Test1Result2.RowSourceType = "Value List" Me.Test1Result3.RowSourceType = "Value List"
I'd like to create a query which will consist of simple SELECT statements as follows:
SELECT [table1].[field1], [table2].[field1], [table2].[field2] FROM table1 INNER JOIN table2 ON ([table1].[fieldX] = [table2].[fieldX]);
The challenge arises b/c instead of joining on equal values, such as the following: [table1] INNER JOIN [table2] ON [table1].[field1] = [table2].[field1]
I would like to join based on equivalencies, such as: [table1] INNER JOIN [table2] ON [table1].[field1] = 34 is equivalent to [table2].[field1] = 2;
I do not know the proper syntax, so this is where I need help. I tried to search online without any success.
I'm trying to determine the SQL to return only those records in a table which have duplicate values in each of two fields, but different values in a third field. Here's an example:
Code:
AcctNum FoodType FoodClass ------- -------- --------- A123 Apple Fruit A123 Apple Fruit A123 Grape Fruit A456 Potato Vegetable A456 Potato Perishable A789 Carrot Vegetable A001 Banana Fruit
For the above table, I'm trying to return records which have multiple entries for AcctNum + FoodType, but DIFFERENT values for FoodClass. So for the above table, the query would return:
It returns these two records because there is more than one record with for the AcctNum + FoodType (i.e. 'A456' + 'Potato'), but DIFFERENT values for FoodClass (i.e. one record has 'Vegetable' while the other has 'Perishable').
