Check Box With Invisible Text Box?
Dec 4, 2012I need code for a check box that has a (Product Impact) text box thats only visible when checked.
View Replies
ADVERTISEMENT
Invisible Combo Box And Check Box
Oct 6, 2013When I checked my Check box(YES) few steps turns invisible which works fine...but when i unchecked(NO) it should display again but it doesn't show up..how can i make it to display when i unchecked it again.. My code has shown below:
Code:
Private Sub BreechDellst3mnths_Click()
If BreechDellst3mnths Then
Me.AvalaHumaResoO.Visible = False
Me.TranIssuesO.Visible = False
Me.Supply_Equp_drugsO.Visible = False
[Code] .....
Visible / Invisible Text Field
Jan 19, 2006on a report that has 2 pages, how can I make a text box in the bottom of the report page 1 invisible, but visible on page 2
you help will be much appreciated
Jabez
Modules & VBA :: Loop For Labels Invisible / Not Invisible
Nov 8, 2013I'm trying to get some labels and eventually text boxes to become visible on an input of a qty in a text box, but I can't get my syntax right.Here's what I have so far.
Private Sub More_qty_AfterUpdate()
Dim count As Integer
Dim pumplbl As String
For count = 1 To [More qty].Value
pumplbl = "pumplbl" & count
pumplbl.Visible = True
Next count
End Sub
Setting Some Text As Visible Or Invisible In A Tabular Form Wrt Boolean Field
May 3, 2006Hi there,
I know there have been a good number of questions about visibility in forms already but I couldn't find a solution to my problem (or maybe I just didn't get it).
Basically, I have a tabular form (more than one record displayed at once) and one the field is of the Yes/No type. For each record, I'd like to have a text box that displays 'pending', set as visible if the field value is 'Yes' and set as invisible if the field value is 'No'.
The table is as follows:
id : auto-number
Flag: Yes/No [Yes]
If I use the following code on the Flag button:
Private Sub Flag_AfterUpdate()
Me.pending2.Visible = Me.Flag.Value
End Sub
all the 'pending' text boxes appear and disappear together (instead of just the relevant one).
I thought of using another text box, with the same data source ('Flag') but which would set itself to visible or invisible wrt to its own value but I couldn't find a way to do it.
Any suggestions ?
Thanks in advance !
and many thanks already for the forum and the contributions - it's been extremely helpful, esp. for a beginner.
Check Box And Text Box Help
Oct 11, 2004I'm going to need a check box and text box. What it needs to do is if box is checked the text box becomes active and required but if not checked then the box doesn't need to be required? Any help would be appreciated.
View 1 Replies View RelatedCheck Box / Text Box Enable Help
Jul 21, 2006I've got a text box that is disabled, and want it to become enabled when the user clicks the required check box.
I've got the following code, and can't see anything wrong with it, but for some reason it doesn't work. No error message appears, but the text box stays disabled regardless of whether I check the check box or not.
Private Sub Successful_Click()
If chkSuccessful = True Then
txtDateAppointed.Enabled = True
Else
txtDateAppointed.Enabled = False
End If
End Sub
Anyone have any ideas?
Dan
Check Box And Text Box Link
May 10, 2014is there a way that once a checkbox is ticked (returns TRUE) can it populate the time, date and current user at the same time. ive got separate fields for this, however, nothing i have tried actually returns any result!
View 10 Replies View RelatedModules & VBA :: How To Check Positioning Of Text
Nov 24, 2014I am required to write a code to check the positioning of a text in a string.
E.g.
"~[Admin]~xxxxxxxxx~ACK~" = Acknowledged
"~xxxxxxxxx~[Admin]~ACK~" = Not Acknowledged
"~xxxxxxxxx~ACK~[Admin]~" = Not Acknowledged
As you can see, as long as the string starts with "~[Admin]~", it is counted as acknowledged. If the "~[Admin]~" appears anywhere else except the start, it is counted as not acknowledged.
I know I'll have to use If-else statements and EOF to cycle through my entire column, but how do I check the positioning of "~[Admin]~"?
Are there wildcard statements that Access VBA can use similar to SQL's "*"?
Modules & VBA :: If Check Box Yes Type Name Of Field In Another Text Box
Jun 9, 2014i have multpile yes/no check box i want if i check on one the name of this check box is written on another one.
so i neeed a code for loop of check boxes and i need a code i.e loop all check boxes if any is true then put name field in {new field}
General :: Using Check Box To Grey Out Certain Text Fields
Oct 24, 2013I am trying to use a check box to either grey out certain text field(s). For example If the box is checked true then certain fields would become available to input data. If the box is not checked it stays grayed out.
View 8 Replies View RelatedClick Check Box And Display Value In Text Box In Access
Feb 27, 2013I have a form that has a remarks textbox. Depending on the options, the form will write something in that textbox. Now I want to have other options (check boxs) that I can click on which will add to that remarks textbox.
Code:
Private Sub Check27_Click()
If Me.Check27 Then
Me.Remarks = ("Shipping Box/Container")
Else
Me.Remarks = ""
End If
End Sub
Check Boxes In A Form To Have Certain Text Print Out?
Apr 18, 2014I was wondering if there was a way to use check boxes in a form to have certain text print out. It's part of an invoice type form and there are 4 different treatments that could have been part of the appointment and the goal is to have a way to check the treatments for that appointment and only have the checked ones print out..
View 1 Replies View RelatedTables :: Sum Of Time / Output It In Text Box For Valid Check Box
Nov 14, 2013Basically what I'd like to do is to sum the time, and output it in the text box for the valid check box. For instance (in the picture attachment) if the 'Running' check box is ticked, Access will add 15 minutes to the 'Total Running Time' text box. If 'Running' is checked again on the next Record, Access will add an extra 15 minutes (totalling 30 minutes) to the 'Total Running Time'. On the 3rd Record if 'Down' is checked, Access will add 15 minutes to the 'Total Down Time' text box, the same for 'Change Over'.
View 5 Replies View RelatedForms :: Requery Text Box Based On Check Box Selected
Sep 10, 2014Is it possible to have a query that will requery value of a check box based on which check box is selected? I have a form that has 5 check boxes and a text field for populating a unit price. When someone clicks a specific check box, the text field should display the unit price. I know how to accomplish this using a combo box and don't want to change the form to setup for a combo box, but rather use what everyone is currently used to. I want to add the check box is from 1 table linked to a form and the unit price is from another table not linked to a form. Both tables have 2 fields in each that will relate.
View 6 Replies View RelatedWant Check Box On Switchboard Form To Set A Text Box's Visible Property In A Report
Sep 23, 2004On my switchboard form, I have a check box which the user can check to make a text box (which appears in several different reports) visible and uncheck to make it invisible. The text box in the reports has the same name on all of them.
I am having trouble making this work.
I can think of two solutions, but haven't had success with either yet.
1. I could simply change the visible property of the report(s) control from the form. This works if the report is open, but throws an error if the report is not open.
Code:Public Sub showNumOrgsInReportCB_AfterUpdate()If Me!showNumOrgsInReportCB.Value = 0 ThenReports![publishZipR]![numOrgsF].Visible = FalseElseReports![publishZipR]![numOrgsF].Visible = TrueEnd IfEnd Sub
Is there a property or function I can use to test whether the report is open before I set the text box visibility?
2. Alternatively, a less elegant solution would be to run an event procedure to close all open reports. This would eliminate that issue, but I haven't gotten the code to work yet:
Code:Public Sub showNumOrgsInReportCB_AfterUpdate() Dim rpt As Report ' Enumerate Reports collection.For Each rpt In ReportsDoCmd.Close rpt.nameNext rptEnd Sub
This line:
DoCmd.Close rpt.name
throws a Run-time Error '13', Type mismatch.
How do I fix that?
I'm open to better ideas!
Thanks
Forms :: Label Text Show / Hide Condition With Check Box Value
Jul 24, 2013I have a report base on my table. Here a check box. I wanna show two label text hide/show base on when check is true or false. It will be when report will be open. I have try this but nothing is happened.
Code:
If AffecteAc= True Then
affected.Visible = True
general.Visible = False
End If
Convert A Text String To Integer - Check For Error In Expression Builder
Apr 24, 2013I would like to convert a text string to integer.
Lots of posts say to use val, but it is not listed in access 2010
So I am trying,
Creating a field that is numeric then just referring to the string field.
This works good except where it finds actual text. It puts the value "#Type!" in there.
Would there be some kind of function to check for an error or check if the value is text.
Tab Invisible
Jan 25, 2006I want to invisible some subform in tab, and there have some check box in the main form to controls which form is visible.
----------------------------------------------------------------------
Private Sub StudentInfo_Click()
If Not IsNull(Me.StudentInfo) Then
Me.tabStudentInfo.visible = "Yes"
Else Me.tabStudentInfo.visible = "No"
End If
End Sub
----------------------------------------------------------------------
Did my code have anything wrong?
Thank
Invisible
Dec 21, 2004Hi all
on a report, I'd like some sections to dissappear (a bunch of labels, text boxes etc...) if there isn't any data.
I have a text box with a fomula in it to return values. But if the value is null, nothing displays. This bit is OK. But I'd like the associated lable to dissappear as well. This is one of the many combinatios I've tried:
Private Sub Report_Open(Cancel As Integer)
If txtboxpmpbalance.ControlSource = Null Then
lblpmpbalance.Visible = False
End If
End Sub
I get a run time error saying there's no value. I'm assuming its because there's a formula rather than a value in the control. I appreciate any ideas.
Damon
Invisible Records
Mar 14, 2007I have a simple database used for competition entries and scoring where I capture the entrants' details (and later their scores) in a single table. If an entrant returns to have another go I can either type in his details again or choose one of his earlier entries and issue a "duplicate" command (I have a button on the form to do this). This seems to work OK and a new record is created and I can see it in the underlying table and it looks OK. However despite restarts, refreshes and requeries none of my queries seem to be able to see a record created in this manner. Any suggestions?
Office XP with latest service pack3 update.
Thanks Dennis
Make A Box Invisible
Apr 22, 2005I belive I have done this before but I cant remember how!
I have a continuos form with two text boxes on it and a check box.
I am trying to say if text box1 = "1" then text box 2 is visible if text box 1 = 2 then text box 2 is invisible. I am doing this on a tick box (for other reasons) so my code looks like this:
If Me.Text1 = "1" Then
Me.Text2.Visible = True
End If
If Me.Text1 = "2" Then
Me.Text2.Visible = False
End If
It works, kind of. The trouble is because its a continuous form all the Text2 boxes become visible or invisible depending rather than just the one record i'm working on. Is there a soloution to this?
Invisible Subform?
Jun 30, 2005I have a form which I use for call logging. I have created a subform which, when a client reference number is selected from a combo box in the main form, the client details appear (address, telephone number blah). It works fine but for purely aesthetic reasons, I want to make this subform invisible and create text fields in the main form bound to the text fields in the subform.
This I know how to do...
...making the subform invisible I do not!
The reason I want to do this is because I can't get the subform to look "nice" on the main form...with bound text fields on the main form I would be able to line them up nicely with existing text fields...
Hope someone can help or at least suggest a better alternative!
Steve
The Invisible Filter
Jan 19, 2006I could easily fix this problem (I hope) by deleting and recreating my form, but I'd really like to know what's going on.
I made a simple form that relates to a single table. No big deal. Somehow, through all of my editing and coding, whenever I open up the form all of the controls are empty. It acts as if the related table was empty. I know the table is not empty though. The only way I can get the form to display anything is if I select "Remove Filter/Sort". The odd thing is I can't find anything that would be filtering my form. This form has no code and the form properties don't show any filters. This odd behavior even occurs when I open the form from the database window and even when I reopen the database.
Invisible Security
Aug 31, 2005I heard of a script that runs before the database opens and it reads the user log-in ID (when you start windows) and, dependng on who you are, grants appropriate permissions. My brother told me they use that where he works. If anyone has a sample of that kind of database or knows what I'm talking about could you e-mail me? (PMs on this forum don't work for me) My e-mail address is jon_ramsey36@yahoo.com. Thanks
View 2 Replies View RelatedCan You Really Make A Table Invisible??
Aug 2, 2006Is it possible to make my Splash screen invisible after someone checked the "Do not show me this screen again" just while that current session? Is there a way of using flags and a system table or query that would allow me to do so? Thank you:)
View 2 Replies View Related