New to Access...
With the following code, the checkbox works, yet in the form when you check the checkbox...all the other boxes
are checked as well.
1. Checking the box return the date
2. UNchecking the box does not clear the date but it unchecks all of the boxes on the form list.
--------------
Private Sub Check30_AfterUpdate()
If [Check30] = True Then
[DATE_PAID] = Now()
Else
End If
End Sub
--------------
Suggestions?
I have a form with three items:a checkbox called "Check231", a textbox called "text921" and another textbox called "text762".
What I wish to do is: Enter text in textbox921, which stays the same as I scroll through each record. Then If checkbox check231 is checked, it displays text from textbox921 to textbox762. Textbox762 is bounded to the form.
I have a checkbox that when checked returns all of the yes values for the column but I want it so that when it isn't checked, it doesnt search for this criteria at all, is there a way of doing this? I tried option buttons too but I wasn't sure of how to go about it.
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code: Between [StartDate:] And [EndDate:]
And
Code: Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
I have a query where I display the [OPEN DATE] and [CLOSE DATE] of my cases. However, when I run this query sometimes the cases are not closed yet, therefore there are null values. However, I also have a field to calculate the datediff between these two dates. I need the [CLOSE DATE] field to display today's date when it is a null value so that I can still get a count of the days using datediff when I run the query.
I have a form with names, address, work completed on a certain date. etc. I have a bound textbox called "DATE" and a bound checkbox called "APPLY_DATE_TO_ALL". I wish to enter a date in a textbox called "DATE" then place a check in a checkbox called "APPLY_DATE_TO_ALL" and it applies this date to ALL records.
Here's the scenario. I have 3 fields [AgentID], [QA Date], [Points Issued]. What I want to do is run a query that will give me the last date [QA Date] a point [Points Issued] was issued for each agent [AgentID]. And I want the query to display all 3 fields according. Is this possible?
Ok, I have a query that returns a case manager, their clients, and a date attributed to each client. Ex:
Case Manager Client Order Date James Bond Pussy Galore 01/05/2005 Oliver Cromwell Janet Roundhead 05/25/2005 Alan Turing E. Nigma 08/20/2005 James Bond Holly Goodhead 12/18/2004
What I would like is for the first James Bond record to disappear, as it is later than the last record, giving me only the FIRST Order Date for each Case Manager. Is this possible? If so, what is the criterion expression?
I have a table which has a column 'Date', which contains dates in the format dd/mm/yy. I wish to produce a quiery which will produce an extra column entitled 'month', which will match each date to the month of that date. I know there is a formula which does this (called 'month' i think), but i dont know how to use it to achieve what I want.
Not all employees will have entries in every class.
Need a query to result in most recent Date for each employee, such as: -------------- J.Johnson......CLASS 3........12/25/05 S.Smith.........CLASS 2.......10/15/05
Does anyone know how to automatically enter the current date into a specified field by simply clicking on a check box. I imagine the IIf function would work when entered into 'Control Source' but I also need the check box to be linked to the underlying table. i.e. I tick the 'Paid' checkbox and the current date is automatically entered into the 'Date Sold' field. I also need the -1 generated by clicking on the checkbox to be stored in the table.
Any suggestions would be appreciated, although I am no good with code, so if you could post an example or an easier way to do it I would be most grateful
When you update inspection requested the inspection due is automatically updated to 30 work days from that day.
Now what I'm trying to do is get the overdue field (it's a yes/no field) to automatically check itself when the current date is passed the inspection due and the inspection done field is blank.
Here's what I have that isn't working:
Code: Private Sub Form_Current() If DateAddW([REQUEST], 30) < Date And [INSPECT DONE] = 0 Then [OVERDUE] = True End If End Sub
DateAddW is a UDF that works just fine. I've tried replacing 0 with Null and neither works.
My issue surrounds retrieving the last (based on most recent date) set of records based on the most recent date. I have query, containing 2 tables as the sources for the query results. Currently, the query yields:
Field A Field B Field C 123456 AAAA 1/8/13 123456 BBBBI 1/8/13 123456 CCCC 1/8/13 123456 DDDD 1/8/13 123456 EEEEEE 3/10/13 123456 FFFFFF 3/10/13 123456 GGGG 3/10/13 123456 HHHH 3/28/13 123456 IIII 3/28/13 123456 JJJJ 3/28/13
The desired results would be to return all records with the last/max date, so yield:
I have a date field (DueDate) that I am comparing against the current date (Date()). When the current date is greater than the DueDate I filter just those dates. I have done that without any problems. Now I am trying to figure out how to compare that filtered information to show that the DueDate is either over 30 days, over 60 days, or over 90 days overdo. If it shows up on either one of those lists I do NOT want it to show up on the other lists. I also want to have a counter by states. For example:
Current Date DueDate State a. 9/22/14 2/1/14 GA *(90) b. 9/22/14 8/20/14 WV *(30) c. 9/22/14 7/1/14 WV *(60) d. 9/22/14 8/19/14 GA *(30) e. 9/22/14 7/31/14 GA *(30) f. 9/22/14 3/1/14 WV *(90) g. 9/22/14 7/20/14 SC *(60)
I have developed a database which has required many checkbox fields to enable analysis. It requires to have the facility to input random/variable date ranges for statistical purposes.
I have built a query which obtains the counts of multiple fields using the following parameters in Query Builder in Access 2010. Although this comes up with the correct results for these multiple fields when I try introduce date range the results come up blank for all results.
An example of the parameters used for one of the checkbox fields in Query Builder is as follows:
Field: SumAnger: Sum([Anger]*-1) Table: Default as only one table Total: Expression Show: Checked
This works fine.
My latest parameters for the date range are this:
Field: [cDate] Table: Default as only one table Total: WHERE Corrected! Whoops Copy & Paste Typo. Too early AM! Show: Checked or Unchecked makes no difference Criteria: Between [From Date:] And [To Date:]
This gives a statement in SQL view of:
SELECT Sum([Anger]*-1) AS SumAnger, Sum([Anxiety]*-1) AS SumAnxiety, Sum([Depression]*-1) AS SumDepression, Sum([Listening]*-1) AS SumListenig, Sum([Psychosis]*-1) AS SumPsychosis, Sum([Stress]*-1) AS SumStress, Sum([Other]*-1) AS SumOther, tblCommsLog.[cDate] FROM tblCommsLog WHERE (((tblCommsLog.[cDate]) Between [From Date:] And [To Date:]));
what I need to get this to work in Query Builder or failing that recommend some VBA script/code with embedded SQL to achieve the required report.
I have the following tables: Rates and SelectedDates, which are structured as follows.
Rates: RateID, EffectiveDate, Rate SelectedDates: Date. Table is bound to a combobox in which user selects one or more dates, mm/dd/yyyy, which is the same format as Rates.EffectiveDate.
I need a query to return the first Rates.Rate for the following conditions. (there will be a minimum of one record in the Rates table)
IF there is only one Rates.EffectiveDate for the SelectedDates.Date return the associated Rates.Rate
ELSE IF count(Rates.EffectiveDate <= SelectedDates.Date)>=1 return the first Rates.Rate where Rates.EffectiveDate <= SelectedDates.Date
ELSE return Rates.Rate associated to the Rates.EffectiveDate closest to the SelectedDates.Date.
I hope this is clear, as it is late and I am tired...:confused:
How do you return the most recent date of multiple columns.
I have a table (tbl_courses) that has a list of training courses. We want to know when a client completed the course most recently.
The problem is, for one course there has been up to 4/5 different variations of the course with different names over the years. E.g. "Drug awareness" has also been known as "Drug Aware" "Illegal Substances" and "Stoppers". I want to pull through the most recent date for all of the above.
We have a field in the Courses table that links the courses into groups (e.g. All drug aware courses come under "23"). Not sure if that works?
Is there a way to do this? The Tbl_Courses is linked to Tbl_Clients via a ClientID.
I've managed to do it in SQL using GREATEST() but that isn't an option in Access.
I am looking to return one row from groups of the same EpisodeID whereby the row with the minimum date is selected each time. This includes returning all other fields in the row such as EventID below and ideally others as well if that will be possible.
To illustrate I include the following. What Access 2003 query would I need to return all the rows with the earliest dates? EventID will be unique in the intial table.
I have a date field in a form fed by an option group. Most of the options return the correct values, but I'm having a hard time with this:
If the inspection date (in another form) is in Jan Feb or March, then return the date 1 Apr of the inspection year. If not, then return 1 Apr of the following year.
When I add a record to table A (using a form) the first field I enter is a date. That date will then determine which records I see in my drop down list from table B (via a query).
Some records in table B have EffectiveFrom and EffectiveTo dates recorded - because they are now obsolete, other records have no dates recorded in these fields because they active.
How can I view and then select from the drop down only those records in table B which are effective/valid to the date entered in table A?
