I am building a database to track employees. I have a form to input the personal information and want to close this form and open a new form to input the employee's training information. I have a cmd button to open the Training form for the individual, however I can not make it close the employee input form.
Can someone help with this?
I have a form that is loaded through a hyperlink from another form. On this form I have placed a command button which closes the form (DoCmd.Close) I have also used the full syntax including form name and no save prompt. When i close this form using the command button I get a request for two paramter values that are used in queries in this form (I don't want this to happen) when I click the close button on the control box "X" this doesn't happen also it doesn't happen if I use file close. This problem only occurs on some of the slower machines in my workplace, any suggestions would be greatly appreciated. The is one combo box on the form in question which is set to run a macro after update, this macro requeries the 52 list boxes on the form.
View 4 Replies View Relatedi am abit confused.. i have a save button on my form.. this is where field validation occurs and where the closeForm statement is (at the end). I need to keep the form's "X" button enabled.. how would i go about doing this exactly.. can i keep what i currently have (in the cmdSave_click event) and in the form_close event i can maybe have if me.dirty then... call my cmdSave_click event?.. Else.. closeform. Is this the right way to go about it??.. if so.. will my formClose statement (in my cmdSave_click event) be alright?
Thanks in advance!
I have a form which I want to disable the close button. On the properties of the form I set Close Button option to 'NO'. When I open the form the form close button is disable, but as soon as I maximse this screen, the close button becomes enabled again. Any Ideas as to why this is happening and how I can disable this button comlpetely on this form?
View 2 Replies View RelatedI have a startup splash screen with a "OK" button, similar to Nortwind database. The OK button works as far as opening my switchboard page. But how do I get the Splash screen to close after I click the OK button? So I can see my switchboard page.
View 2 Replies View RelatedI am tying to create a cmd btn called "Report" that when clicked opens a form [quick report] in dialog window. I have that done easy enough. But what I want is if that form [quick report] is open, and you click the same button "Report" for it to then close the form.
View 3 Replies View RelatedHi,
Anyone know in microsoft access 97 is it possible to remove the close button (top right hand corner) when a form is maximised?
Thanks.
I have to write a code in a form so that if nobody is doing any activity for 5 minutes then after 5 minutes automatically press Close button named BtnClose in that form.
View 5 Replies View RelatedI am at my Login Screen, I want it to return to the Login Screen if you select "NO" and Close the DB if "YES"
Here is my current code:
Private Sub Form_Close()
If MsgBox("Would you like to EXIT the Database?", vbYesNo, "Quiting Database") = vbYes Then
Application.Quit
Else
???
End If
End Sub
i have close button on my form made thru the command button. But it does not show an error message when the form closes if information has not been entered in the reqired fields. it does not save the field though. how can i get the error messages to be shown before the form closes asking the suer to enter the missing data. thanks
View 2 Replies View RelatedThe database that I currently work with has the option chosen to compact and repair on close so that if I am not present when there is trouble the users can close the db and the problem is usually corrected. I currently have a close button on the Main switchboard that closes the db. Is there a way to make a button or another way that will close the db that will by pass the compact and repair choice? I know that I can use task manager, but that usually creates db1, db2 and so on.
Thanks,
Hello,
Is there a way I can disable the access close button, located at the top right of the screen?
Thanks.
I use a close button to close a form. There is list box in this Form. If the list box is empty, then simly close the form. However, if there are projects in the list box, I want to give a warning. If the user say YES, then everything in the listbox will be deleted and the form will be closed. If user say NO, tehn the form will not be closed. They then can use anotehr button to save teh projects.
I wrote the follwing code. The delete portion itself works. But it seesm comfused with msgbox. Could you pelase help me correct this code? Thank you very much for your help.
lbDestination -- list box name
Private Sub Close_Click()
On Error GoTo Err_Close_Click
If IsNull(Me.lbDestination) Then
DoCmd.Close
Exit Sub
End If
If MsgBox("You have unsaved initiatives. Are you sure you want to close?", vbQuestion + vbYesNo + vbDefaultButton2, _
"Delete?") = vbYes Then
Dim rsDestination As DAO.Recordset
Set rsDestination = CurrentDb.OpenRecordset("tbInit", dbOpenDynaset)
rsDestination.MoveFirst
Do While Not rsDestination.EOF
rsDestination.Edit
rsDestination.Delete
rsDestination.MoveNext
Loop
Me.lbDestination.Requery
End If
Exit_Close_Click:
Exit Sub
Err_Close_Click:
Resume Exit_Close_Click
End Sub
Hi Guys,
I have a database that uses a switchboard with a close button that runs several instructions before it exits. The problem is that some users have access to the database window and I need to prevent them from closing the database by hitting the X in the upper right.
Anyone know how to do this?
how to disable the main close button so the user is forced to click the Quit Application button on my main switchboard?
View 8 Replies View RelatedEverytime i want to make some changes to my "Testing" Database , always got somebody using it / opening it...
I am trying to create a button , the function of the button is close "Testing" access database who using it or opening it , Example : 5 users included me in a company , when I click a button , 4 of them will received a notification with close "Testing" database message , can do that ?
Getting error '2450' when click Access close button to exit.
Run-time error '2450': ECN cannot find the referenced form 'frmLogin'.
Note: After login my login form is visible to, cause to get login user id into "frmECN" Form. But When I'm in "frmECN" Form and enter data then close to exit Access main close button I'm getting 2450 error.
How do I get the x close button back onto the forms in Access 07?
View 5 Replies View RelatedI have a split form that's like a list of pending tasks. The data source is a linked SharePoint 2013 list where users submit requests. The user takes the information from each record and performs an action. When it is done, the user presses a button and the task status changes from "Pending" to "Processed". The form record source is based on a query that finds only records with a status of "Pending" so when the user changes the status of the task, it is removed from the list. It works fine except when there is only one task left in the work list. If the user processes the last task, the form refreshes and it goes to a new empty record and I get an error message that says I must enter a value into one of the required fields. I tried making the field non-required but it just creates an empty record in the table.
View 3 Replies View RelatedI tried all sorts of permutations of the requery command but apparently I'm too dense to figure it out.
Form 1
subform 1 > button to open pop up form
subform 2
subform 3
I'm trying to requery a combo box (inside of subform 1) based on a table that is updated from the pop up form.
On pop up form close, what's the correct syntax for re-querying subform 1?
I am using the method from allen browne [URL] .... to open a form and add it to a collection and when removing it it closes. actually, usually it does work so but i have now a form which does not close until i am hitting the reset button in VBE , is there something i could check why it's not functioning as desired ?
Just to add, this form has a subForm as well (might be the cause ?)
I have a timer form which closes the database after a period of time with DoCmd.Quit. Another form is open at this point but if a user has left it in the middle of editing it I want to be able to save the record in the other form and close it before the timer form closes the database.
What VBA do I need in the timer form to save the record and close the other form before DoCmd.Quit? Just to be clear the code is...
Private Sub Form_Timer()
On Error Resume Next
Me.Tag = Val(Me.Tag) - (Me.TimerInterval / 1000)
Me.Caption = "The database will exit in " & Me.Tag & " seconds"
If Val(Me.Tag) <= 0 Then
[code]...
When the user clicks to close the form the Before Update event runs, and has the following code to check that all the required fields are completed:
If IsNull(Me.ToxReceived) Then
stdresponse = (MsgBox("You must enter the toxicology received date before continuing." & Chr(13) & Chr(10) & Chr(13) & Chr(10) & _
"Do you want to do that now? Click YES to return to complete the form, click NO to undo the record", vbYesNo, "Missing Data"))
If stdresponse = vbYes Then
Me.ToxReceived.SetFocus
Else
Cancel = True
Me.Undo
Exit Sub
End If
End If
If the user clicks no, and the record is undone, how do I get the close form event to still continue?
D
i put a button that run the command "docmd.close" but i found when i click it it close the form but with saving all data in field in the table, but this button should cancel record insertion, i hope i can find the answer here.
Thank you
Best Regards
I have a form that I want only to be opened from another form (i.e. the user presses a button from form1 and form2 is magically displayed).
My solution: In form2, I check to see if form1 is open in "use" mode. If not, I display a message and close form2.
The problem: The close code (docmd.close) is at the beginning of Form_Current. Apparently, Form_Current doesn't like to be interrupted. I receive a run-time error 2585 (This action can't be carried out while processing a form or report event).
Ok, so, umm, how exactly am I supposed to close the form? I tried the check during Form_Load instead, using the cancel variable instead of the docmd.close. However, I don't think this code got executed. It's almost like the form was already loaded or the Form_Load occurs after Form_Current (In my handy chart here, it says that Form_Current occurs when a form containing data is first opened and when you move to a different record.. so, I suppose it is possible).
Any thoughts?
I'm trying to close one form by using a button on another. This is my code:
DoCmd.Close acForm, frmSimCount
It dosen't work but comes up with an error:
Run-time errer '2493'
This action requires an object name.
I thought that was the name of the form, which is frmSimCount, could someone put me in the right direction please.