Hey,
Can someone pls tell me how to close a form as soon as it gets deactivate? Becouse i try with Docmd.Close but it tells me that i can not do that in this event, but thats exactly what i would like to do - close form when it gets deactivated?
Thx
I can't seem to figure out how to close current form.
I have form1 and I open form 2 from form1. I can't figure out how to close form1 when form2 opens.
Any help would be greatly appreciated.
Hi,
on a form with several subforms i have ran into some trouble. I have the subforms use code to determine if a scrollbar is needed. As a recordselector I use a listbox on the main form.
When i close the mainform, it sometimes makes a popup box appear saying that there is no current record.
Sofar I have determined the following :
- Removing the code from the form, removes the error.
- The code is only executed when selected records in the listbox have related record(s)
- The error only occurs when the code is executed at least once and the last selected record has no related record(s)
I dont know if altering the code would have any success, cause it won't run anyway when I select the last record (with no related records).
I guess moving the code to another section would be better, but I've tried other options like 'on focus' etc, but could not find one that responded.
HELP PLZ :)
Private Sub Form_Current()
On Error GoTo Error
'kijken of verticale scrollbar nodig is
maxRegels = 14
Dim rstCount As DAO.Recordset
Set rstCount = Me.Recordset
If rstCount.RecordCount > maxRegels Then
Me.Form.ScrollBars = 2
Else
Me.Form.ScrollBars = 0
End If
Error:
If Err.Number <> "0" Then
Else
MsgBox Err.Number & " " & Err.Description
End If
Exit Sub
End Sub
ps. I've tried to catch err.Number = "3021" in the Error: section, but without success
Hi
I need a button code in the OnClick event.
I want when clicking on the button, to close the currently opened form and open another one.
Any help will be very much appreciated!
Thanks guys!
C.
Dear all,
I create a make table query.
But every time I run the query, the notification will prompt out "are you sure....".
Is there any way to disable this notification?
Tq.
I can't use the menu TOOLS because it is deactivate for all mdb.
Is it deactivated from portion of VBA code?
How Can I restore this menu?
By Francy
I am creating a report from a form. The focus jumps to the report but I want it to stay on the form. I have a macro that creates the report. How can I keep the focus on the form?
View 2 Replies View RelatedI'm trying to deactivate the page down key in my form with no luck. How to deactivate the page down key. Here's the steps I have already completed.
I opened the form in design view, set KeyPreview Property to Yes, selected Database Tools, Visual Basic and inserted code in lines 3 through 9 after the dash / line.
Update_Total
'
'------------------------------------------------------------
Function Update_Total()
On Error GoTo Update_Total_Err
Private Sub form_keydown(KeyCode As Integer, Shift As Integer)
Select Case KeyCode
Case vbKeyPageDown
[code]....
How can i deactivate mouse second button click on form?
Can anyone help me please?:)
I have a sub form that hase multiple records. What I would like to do is if my catagory field = "(1) Constrution" the deactivate 'DC to Apply', got that to work BUT it does it for all of the record..Notice in the pic that the first record = "(1) Constrution" and id deactivates ALL of the "DC to Apply"
Here is my code
Private Sub Category_AfterUpdate()
If Me.Catagory = "(1) Construction" Then
Me.DC_to_Apply.Enabled = False
Else
[code]....
What I really need is for when the form opens, it looks at todays date, then matches current user and then goes to that record for today, if no current user there, then will goto new record..
i know, sounds complicated, and probably is really easy, but my heads not with it today, as about to get drunk as its my 40th, and got people ringing and texting and still trying to get this done....
I've included a copy of this database, named Timecards..
I have a split form that's like a list of pending tasks. The data source is a linked SharePoint 2013 list where users submit requests. The user takes the information from each record and performs an action. When it is done, the user presses a button and the task status changes from "Pending" to "Processed". The form record source is based on a query that finds only records with a status of "Pending" so when the user changes the status of the task, it is removed from the list. It works fine except when there is only one task left in the work list. If the user processes the last task, the form refreshes and it goes to a new empty record and I get an error message that says I must enter a value into one of the required fields. I tried making the field non-required but it just creates an empty record in the table.
View 3 Replies View RelatedI tried all sorts of permutations of the requery command but apparently I'm too dense to figure it out.
Form 1
subform 1 > button to open pop up form
subform 2
subform 3
I'm trying to requery a combo box (inside of subform 1) based on a table that is updated from the pop up form.
On pop up form close, what's the correct syntax for re-querying subform 1?
I am using the method from allen browne [URL] .... to open a form and add it to a collection and when removing it it closes. actually, usually it does work so but i have now a form which does not close until i am hitting the reset button in VBE , is there something i could check why it's not functioning as desired ?
Just to add, this form has a subForm as well (might be the cause ?)
I have a timer form which closes the database after a period of time with DoCmd.Quit. Another form is open at this point but if a user has left it in the middle of editing it I want to be able to save the record in the other form and close it before the timer form closes the database.
What VBA do I need in the timer form to save the record and close the other form before DoCmd.Quit? Just to be clear the code is...
Private Sub Form_Timer()
On Error Resume Next
Me.Tag = Val(Me.Tag) - (Me.TimerInterval / 1000)
Me.Caption = "The database will exit in " & Me.Tag & " seconds"
If Val(Me.Tag) <= 0 Then
[code]...
When the user clicks to close the form the Before Update event runs, and has the following code to check that all the required fields are completed:
If IsNull(Me.ToxReceived) Then
stdresponse = (MsgBox("You must enter the toxicology received date before continuing." & Chr(13) & Chr(10) & Chr(13) & Chr(10) & _
"Do you want to do that now? Click YES to return to complete the form, click NO to undo the record", vbYesNo, "Missing Data"))
If stdresponse = vbYes Then
Me.ToxReceived.SetFocus
Else
Cancel = True
Me.Undo
Exit Sub
End If
End If
If the user clicks no, and the record is undone, how do I get the close form event to still continue?
D
i put a button that run the command "docmd.close" but i found when i click it it close the form but with saving all data in field in the table, but this button should cancel record insertion, i hope i can find the answer here.
Thank you
Best Regards
I have a form that I want only to be opened from another form (i.e. the user presses a button from form1 and form2 is magically displayed).
My solution: In form2, I check to see if form1 is open in "use" mode. If not, I display a message and close form2.
The problem: The close code (docmd.close) is at the beginning of Form_Current. Apparently, Form_Current doesn't like to be interrupted. I receive a run-time error 2585 (This action can't be carried out while processing a form or report event).
Ok, so, umm, how exactly am I supposed to close the form? I tried the check during Form_Load instead, using the cancel variable instead of the docmd.close. However, I don't think this code got executed. It's almost like the form was already loaded or the Form_Load occurs after Form_Current (In my handy chart here, it says that Form_Current occurs when a form containing data is first opened and when you move to a different record.. so, I suppose it is possible).
Any thoughts?
I'm trying to close one form by using a button on another. This is my code:
DoCmd.Close acForm, frmSimCount
It dosen't work but comes up with an error:
Run-time errer '2493'
This action requires an object name.
I thought that was the name of the form, which is frmSimCount, could someone put me in the right direction please.
why a form won't close. Each time I try to I am prompted to save and when I do, the form doesn't close. When I closed the DB and reopened, none of the changes were saved.
View 6 Replies View RelatedHi,
I want to have some queries run during the database is closed, like the functiona with "Repair on Close". But I don't want to use a form with a VBA code doing it. Is there any other possibility to do it? :confused:
Thanks in advance for answers.:)
Hi,
I've got a database with a linked table to a CSV file which is automatically extracted from some logging software. The Database is used to search for text strings (e.g. "example") within several fields wichin the automated extract and then show the results with any duplicated instances taken out (via an append to table query which is indexed with no duplicates).
So:
Text is entered
FieldA is looked through for a match, if a match is found the whole record gets appended to the Append table.
FieldB is looked through and if a match is found the whole record (including field A) is appended, however if the match has already been found in A, then the record is not copied.
It does this for several fields and then you get a table which is every record containing the searched for text with no duplicates.
This table is then displayed as a subform on another form in it's "table" view.
The form I'm trying to close is the form which contains the above subform.
I've tried:
A macro with close -> form -> formname which doesn't work.
Code:
Private Sub Toggle2_Click()
On Error GoTo Err_Toggle2_Click
DoCmd.Close
Exit_Toggle2_Click:
Exit Sub
Err_Toggle2_Click:
MsgBox Err.Description
Resume Exit_Toggle2_Click
End Sub
Which also doesnt work!
HOWEVER, just to make things interesting, if I click to view the form design, then run the form again, it will close fine using either method. It just seems not to work on the initial run of the text search which then opens the form displaying the subform.
Any ideas?? I can't understand why it won't work.
Cheers - Hope I explained it ok :)
It seems so simple to do, but I've spent ages looking through the forums and haven't found a simple implementation of it.
How would you close a form based on a query called 'Retired' if no records are found?
I assume it's going to be a bit of VBA code, but I'm still learning VBA. :-(
Hi guys,
I have a form that the user uses to input data. If the user tries to close the form by clicking on the X then a warning message is displayed such as:
The field cannot contain a Null value because the required property for this field is set to true. Enter a value in the field.
What I want to happen is that when the user closes the form via the X, then no updates are undertaken (in effect a cancel operation).
How do I do this???
Thanks
Hi, all. I am sorry if i do something wrong but it is my first time here.
Situation:
I have an application with a login form. Once you press the login button the login form is hidden (visible=False) to be able to pass the userid to another form. In order to close the application the user needs to press a button in the swithcboard but that is not possible because the hidden form.
Question: How can i close the hidden form to be able to close the application?
Thx in advance.
I have a form that is loaded through a hyperlink from another form. On this form I have placed a command button which closes the form (DoCmd.Close) I have also used the full syntax including form name and no save prompt. When i close this form using the command button I get a request for two paramter values that are used in queries in this form (I don't want this to happen) when I click the close button on the control box "X" this doesn't happen also it doesn't happen if I use file close. This problem only occurs on some of the slower machines in my workplace, any suggestions would be greatly appreciated. The is one combo box on the form in question which is set to run a macro after update, this macro requeries the 52 list boxes on the form.
View 4 Replies View Related