I have a simple EXIT command button that runs these macro actions: save record, close form. I also have a SAVE command button that runs this macro action: save record. If a user closes the form without clicking either the EXIT or SAVE command buttons, will the record changes be saved in the datasource table.
I have found from testing that the data is always saved even if the user does not click the EXIT or SAVE buttons, but I wanted to be absolutely certain. Is this correct ?
I have a split form that's like a list of pending tasks. The data source is a linked SharePoint 2013 list where users submit requests. The user takes the information from each record and performs an action. When it is done, the user presses a button and the task status changes from "Pending" to "Processed". The form record source is based on a query that finds only records with a status of "Pending" so when the user changes the status of the task, it is removed from the list. It works fine except when there is only one task left in the work list. If the user processes the last task, the form refreshes and it goes to a new empty record and I get an error message that says I must enter a value into one of the required fields. I tried making the field non-required but it just creates an empty record in the table.
hello again guys i got another question... i have a "quit" button on my form that closes access. my problem is that if there is something selected from my list box and something entered into my textbox, it will add the record when i click quit. what can i do to make it NOT add the record. i've searched on google all day and i've been trudging through a bunch of forums and still can't find anything. i did see something about the dirty property, but i can't seem to figure out how i can use that to my advantage. please help!!! thanks a bunch *j
I have validation logic that runs to test whether certain fields are inputted properly etc on my form. I call these methods in the Before_Update of each form. But How do i actually STOP the update from happening? OR how do i stop the form from being closed? Right now, I just give all these warnings but the save still happens!
on a form with several subforms i have ran into some trouble. I have the subforms use code to determine if a scrollbar is needed. As a recordselector I use a listbox on the main form.
When i close the mainform, it sometimes makes a popup box appear saying that there is no current record.
Sofar I have determined the following :
- Removing the code from the form, removes the error.
- The code is only executed when selected records in the listbox have related record(s)
- The error only occurs when the code is executed at least once and the last selected record has no related record(s)
I dont know if altering the code would have any success, cause it won't run anyway when I select the last record (with no related records).
I guess moving the code to another section would be better, but I've tried other options like 'on focus' etc, but could not find one that responded.
HELP PLZ :)
Private Sub Form_Current() On Error GoTo Error
'kijken of verticale scrollbar nodig is maxRegels = 14
Dim rstCount As DAO.Recordset Set rstCount = Me.Recordset If rstCount.RecordCount > maxRegels Then Me.Form.ScrollBars = 2 Else Me.Form.ScrollBars = 0 End If
Error: If Err.Number <> "0" Then Else MsgBox Err.Number & " " & Err.Description End If Exit Sub
End Sub
ps. I've tried to catch err.Number = "3021" in the Error: section, but without success
I have a form and a report that will not save the changes nor close. I have done compact and repair, performed a restart and it is still happening. What could cause something like this. I have been working all day on other forms and reports without incident.
After I enter data into one field in a record I would like the form to save the record when I move to another field in the same record. It seems that the record is only saved when I exit it entirely. Is there a way to save a record when moving between fields in that record? Can this be done without using an Event Procedure for each field?
I have a form frmAddNewProject that is a Data Entry form.When you click Add Project on the form, it creates folders and copies files to a location and also creates new record(s) in the ProjectT table with appropriate information.Here is my code:
Code:
Private Sub cmdAdd_Click() Dim FSO As Object Dim FromPath As String Dim ToPath As String Dim FolderPath As String Dim strType As String Dim strYear As String Dim strGPN As String
[code]....
Everything works fine till here. Now I would like to close the form but closing it gives me an additional empty record.
Code:
Dim ctl As Control On Error Resume Next For Each ctl In Me.Controls ctl = ctl.DefaultValue Next Set ctl = Nothing
to remove all values, but then it just adds an empty record.Is there a way to close that form without removing my legitimate new records and without adding empty ones?
I have a form I would like to close without saving the record using a button. here is the code I have but it closes the form and it also writes the record to the table.
Code: Private Sub ClosewoSave_Click() Cancel = True Me.Undo DoCmd.close DoCmd.OpenForm "frmMenu" End Sub
I found in a thread that Cancel = True would not write the record.
I have a timer form which closes the database after a period of time with DoCmd.Quit. Another form is open at this point but if a user has left it in the middle of editing it I want to be able to save the record in the other form and close it before the timer form closes the database.
What VBA do I need in the timer form to save the record and close the other form before DoCmd.Quit? Just to be clear the code is...
Private Sub Form_Timer() On Error Resume Next Me.Tag = Val(Me.Tag) - (Me.TimerInterval / 1000) Me.Caption = "The database will exit in " & Me.Tag & " seconds" If Val(Me.Tag) <= 0 Then
I have a form which displays data from a table... however i have added a combo box which retrieves value from another table. I have also added a save record button. When i try to save the record. instead of saving the text in the combo box like i wanted. It saves the value 1,2 or 3 instead. How do i make it save the selected text instead?
I have created a Form to add customer payment entries to our database which will be added to the TRANSACTIONS table. I have a combo box which allows us to lookup our account number from the main CUSTOMERS table designated in the row source of the combo box. The rest of the fields use control sources from the TRANSACTIONS table which is the table that will contain the new records. I have added a Command Button that is labeled "Save Record" and it is programmed to do just that. My problem is that the records are being added to the TRANSACTIONS table even before I click my command button. I have the "date" feild in the form set to auto populate today's date. When I open the form, select an account number and tab to the date or any other field, and then close the form WITHOUT clicking the command button, the record is still added to the table. Can anyone help me to stop this from happening? I do not want anything added to the table until the "Save Record" button is clicked.
I have the Roger Jennings book: "Using MS Access 2003" and also the "MS Access 2003 Bible", but I am still unable to find an answer to my problem.
I'm using: DoCmd.OutputTo acOutputForm, "Frm_EL_PL_Bulk_Send", acFormatPDF, outputFileName1...To save a form as a PDF. The issue is, it saves all the records in that set in continuous form, and I'm trying to get it to only save the record its on.
I want to open an existing record via a form and then edit that data but save the form as a new record. Basically a form used for handover/takeover process where most of the data remains the same but the new form is the basis for the next handover/takeover.
I have been working on a bound form that I can't seem to get working.
It records deliveries and what I am trying to achieve is after the form has been filled in the user will click a save button where the record will be added to the table and a record automatically printed via a report and emailed to the shop manager, but i keep getting the error "No Current record" no matter what way I try to do it, I have tried using to run the report. Is the best way for me to accomplish this o change it to an unbound for and run an insert query on click?
I have attached a copy of what I have been working on : DatabaseDelivery.accdb
In Access I have created a button to print a preview prior to printing document it is entitle "NoVeteranMain" which works fine. Except I want it to save my document prior to printing preview how would I do it. If not after I edit it I have to re-save it prior to hitting button which generates print preview.
This is code that is generate upon click
Private Sub NoVet_Click() DoCmd.OpenReport "NoVeteranMain", acViewPreview, , "ClientID = " & Me.ClientID End Sub
I have a "Search" form that I am using to search through a query in a list box of all of my Customers. Once the record that I am wanting to view comes up I highlight it and click a "View" button to bring up another form with the customers full record. When this form is open I am able to update the customer information and add User's to it if necessary.
My problem comes after I click on my save and close button that takes me back to me search form. I want to close the search form and the error I get is "The record cannot be deleted or changed because table "tblUserProfile" includes related records." I click OK and get a SECOND error stating "You can't save this record at this time. MS Access may have encountered an error while trying to save a record. If you close this object now, the data changes you made will be lost. Do you want to close the database object anyway?"
I have already made my changes and saved them in the form with the customer record so am not sure why I am getting an error when trying to close the Search form.
How do i save a record as soon as text is entered into the textbox in a form?I need it to save without moving on to the next form without having to click a button
I am working on a database and i have notice after making a form that when i enter a record using a form if i enter incomplete data on the form access automatically save that record and generate a id for that record.
For example I have a table that contain
StudentID,StdName,FatherName,DOB,Adress,Phone
And I have created a form for that table that also containing these fields.
Here I want to do that on the form I want a "Save" button , and the purpose of this button that when I click on this button then MS Access Save the record and then generate the ID for that record and if i close my form without pressing "SAVE" button access do not save that incomplete record.
I have a form and a subform in it. I added New cancel button in the form so that the the user can cancel the record creation and no record will be inserted in the parent table.
But when details are entered in the subform (a datasheet) row records will be created in the subform table. what is the correct method or how to cancel these records if the user choose to click cancel button on the parent form.
I have a form which contains one subform. On the subform I have a command button which saves the record just entered. On the main form I have a "refresh form data" button which updates the main form so that the calculated controls can show the correct results based on the data just entered?
Can anyone tell me how I can get the "save record" button in the subform to subsequently refresh the data in the main form as well, thus saving a button???
ClientsID (PK) blah blah Information and Referral (a check box) blah blah blah blah
ClientIR (the form that opens up when I & R is checked)
IR ID (PK) ClientsID (FK to the above form) Requests (a lookup referencing to IRCategory)
The code is set up so when the I R box is checked, form will open, and unchecking it will delete the I R record of that Client.
The problem is when the IR Box is already open, the request has been selected, I cannot save it as Access says a record is required in the Clients form. There are only two buttons, one goes on to next requests (one client can have more than one requests), other saves and closes.
The Client form is already coded so it will save the Client's record before opening the IR Form, and either button will save the IR record as well.
I had referential intergrity turned on. Turning it off only gave me weird results (I was able to input records, but Access didn't autofill the ClientID in the IR records, and looking at Clients returns a blank IR record)
