Closing Access
Jan 27, 2005I want it to make it impossible to close my access application (mde file) through
the normal way (the x on top must be shut off)
greetings
Koen
ADVERTISEMENT
Access Not Closing
Jun 13, 2005Has anyone seem the problem when you close an access database and you think it is close but if you open the task manager you will see MSACCESS.EXE still running. Why ????
Jon
Closing Access
Feb 12, 2005I want to put a button on my form which closes access i.e when i click it the access application closes and I go to desktop directly. Is there anyway I can do that.
Regards
Rahul
Closing Access
Mar 3, 2005Is there a way to close access from a form?
I know you can close the database, but is there also a way to close the entire programs with a button on a form?
Thx in advance,
Lion85heart
Access 97 Closing With No Errors
Sep 27, 2007I have recently done a fresh install of access 97 to our 2003 server. I load up an access app, it brings up a form with a button...I clidk the button, and it closes the app with no errors, and leaves the ldb file in tact. Checking the event viewer, I get this message:
Faulting application msaccess.exe, version 8.0.0.5903, faulting module unknown, version 0.0.0.0, fault address 0x00202878.
It appears to be on the buttons that open forms / reports, but not those that run queries. Any ideas?
ACCESS CLOSING STRING. Help!
Feb 21, 2007where do I add a closing string into this code and what do I write? The server said the database is not closing the access database correctly and i don't know what is wrong.
<configuration>
<appSettings>
<add key="connString" value="~/protected/pedalcardb.mdb" />
</appSettings>
<system.web>
<!-- DYNAMIC DEBUG COMPILATION
Set compilation debug="true" to enable ASPX debugging. Otherwise, setting this value to
false will improve runtime performance of this application.
Set compilation debug="true" to insert debugging symbols (.pdb information)
into the compiled page. Because this creates a larger file that executes
more slowly, you should set this value to true only when debugging and to
false at all other times. For more information, refer to the documentation about
debugging ASP.NET files.
-->
<compilation
defaultLanguage="c#"
debug="true"
/>
<!-- CUSTOM ERROR MESSAGES
Set customErrors mode="On" or "RemoteOnly" to enable custom error messages, "Off" to disable.
Add <error> tags for each of the errors you want to handle.
"On" Always display custom (friendly) messages.
"Off" Always display detailed ASP.NET error information.
"RemoteOnly" Display custom (friendly) messages only to users not running
on the local Web server. This setting is recommended for security purposes, so
that you do not display application detail information to remote clients.
-->
<customErrors defaultRedirect="error.htm" mode="RemoteOnly" />
<!-- AUTHENTICATION
This section sets the authentication policies of the application. Possible modes are "Windows",
"Forms", "Passport" and "None"
"None" No authentication is performed.
"Windows" IIS performs authentication (Basic, Digest, or Integrated Windows) according to
its settings for the application. Anonymous access must be disabled in IIS.
"Forms" You provide a custom form (Web page) for users to enter their credentials, and then
you authenticate them in your application. A user credential token is stored in a cookie.
"Passport" Authentication is performed via a centralized authentication service provided
by Microsoft that offers a single logon and core profile services for member sites.
-->
<authentication mode="Forms" />
<!-- AUTHORIZATION
This section sets the authorization policies of the application. You can allow or deny access
to application resources by user or role. Wildcards: "*" mean everyone, "?" means anonymous
(unauthenticated) users.
-->
<authorization>
<allow users="*" /> <!-- Allow all users -->
<!-- <allow users="[comma separated list of users]"
roles="[comma separated list of roles]"/>
<deny users="[comma separated list of users]"
roles="[comma separated list of roles]"/>
-->
</authorization>
<!-- APPLICATION-LEVEL TRACE LOGGING
Application-level tracing enables trace log output for every page within an application.
Set trace enabled="true" to enable application trace logging. If pageOutput="true", the
trace information will be displayed at the bottom of each page. Otherwise, you can view the
application trace log by browsing the "trace.axd" page from your web application
root.
-->
<trace
enabled="true"
requestLimit="10"
pageOutput="false"
traceMode="SortByTime"
localOnly="true"
/>
<!-- SESSION STATE SETTINGS
By default ASP.NET uses cookies to identify which requests belong to a particular session.
If cookies are not available, a session can be tracked by adding a session identifier to the URL.
To disable cookies, set sessionState cookieless="true".
-->
<sessionState
mode="InProc"
stateConnectionString="tcpip=127.0.0.1:42424"
sqlConnectionString="data source=127.0.0.1;Trusted_Connection=yes"
cookieless="false"
timeout="20"
/>
<!-- GLOBALIZATION
This section sets the globalization settings of the application.
-->
<globalization
requestEncoding="utf-8"
responseEncoding="utf-8"
/>
</system.web>
</configuration>
Access 2000 Suddenly Closing
Jul 16, 2007Recently Access has started to suddenly close. Usually when I have been developing although I do not appreas to have lost anything as I Save, Save, Save all the time. Last week I had a report that a live access 2000 is doing the same thing. Users are in the middle of entering data and suddenly the database is gone, with no messages. They can re-open the database and continue.
Anyone else experiencing this problem with Access 2000?
General :: Closing PDF Using Access Code?
Jul 15, 2015How do I close a .pdf file using Access code? There has got to be some simple line of code that will do this.
I know the location of the .pdf. There has to be something like:
CloseFile(filePath.pdf)
Closing Down Access Takes Ages
Apr 17, 2012I'm using Access 2000 and every time I shut down my database, it takes ages (the screen locks up) and it creates a duplicate copy of the database.
I seem to recall it saying, on a few occasions, that it was something to do with a "Read Only" file;
My Users Keep Accidentally Closing Access - Need Ideas
Jan 15, 2007Hello.
I have a fairly complex database with a lot of charts, reports, forms etc.
My problem is that whenever someone chooses to maximize a Pivotchart, a report preview or other things, they usually click the big X button in the top right hand corner and close Access entirely. They don't think to click the smaller x button right below it.
This is frustrating when they just want to go back to the switchboard to performs some other task. They have to restart the database, log in...etc.
I know you can prevent forms and whatnot from being maximized, but I do want them to have that feature for a number of reasons... especially with my Pivotcharts. They are much clearer when expanded to full-size.
Is there a solution to this problem, or do my users just have to be more careful?
Thanks in advance
Update List Box Without Closing And Opening Ms Access
Aug 30, 2005Greeting,
- i have a form, that has a List Box coming from a table ,,
This list box when you click on it, it shows that field in the main form
- and i have a front end and a backend to this database,
- When i add a new entry in my main form, it shows in the List Box just fine, but when i click on that list box, it doesn't show the entry on anyone else on the network - works ok locally
here is an eg: my main table has firstName, LastName, PhoneNumber, Address
Form : main form has firstName, LastName, PhoneNumber, Address
List Box inside my Form has: First Name
so i when i click on the firstName in my list box, it will show me the contact person in my main form
as i mentioned i have couple of people has the database open (split Database) anyone on the network, could see the update on the list box , but when they click on the new created name doesn't show in the main form, unless you close access, and reopen it again
i hope i was clear expaling,
any idea on how to have the List Box update itself without closing and opening Ms Access ??
thanks in advance
Using Asp.net To Control Access Database And It Is Not Closing Connections
Feb 14, 2007server administrators have expressed concern about my website that it is having a negative impact on the server.
He said this typically occurs when a website has a memory leak (where it obtains server resources and doesn't release them) or is opening database connections and not closing them until the point where no more are available.
I'm using asp.net to control Access and open the connections.
I don't know why it isn't closing them? the website is:
pedalcar.com
Any thoughts of what the problem is and what the statement I need to close the connections?
General :: Get Rid Of Dialog Box When Closing Access 2010
Oct 21, 2013I have a Access 2010 DB. The mainform have a subform with one table alone.
I have a button who close Access when the user are finish on the mainform. Still I have the upper right corner X-button who also closing the app.
My problem is that when the user use the X-button then a dialog box appear and ask for saving the changes for the table in the subform on the main form. The user must then do the choise 'yes' , 'no' , 'Cancel'.
There is no need for this dialog box, (I take care if it's necessary earlier) but I can't get rid of it.
Modules & VBA :: Closing Already Open Excel File From Access
May 25, 2015I want to delete an excel file from within access vba. Problem is that if the file is open, it obviously cannot be deleted. so I need to check to see if that specific excel workbook is open and if it is, I want to close it before I can delete it.
All of the answers here involve creating an excel object and opening it before closing it. If I do that all that happens is a second instance of the workbook opens then closes leaving the originally open workbook still open.
Sub xx()
Dim XLapp As New Excel.Application
Dim ObjXL As Excel.Workbook
Set ObjXL = XLapp.Workbooks.Open("C:dropboxexcelimport.xlsx ")
ObjXL.Application.Visible = True
[Code] .....
The above code demonstrates my problem, if the import.xlsx file is already open then the code just opens another instance of this workbook and then closes it again leaving the original workbook open and as such cannot be deleted.
Forms :: Parameter Prompt When Closing Form - Access 2010
May 8, 2013On a pop up form I have a list box. The row source for the list box is
Code:
SELECT tblWebOrder.WebOrderId AS [Web Order No], tblWebOrder.CustomerWebOrderNumber, Format([WebOrderDate],"dd/mm/yyyy") AS [Order Date], tblCustomer.CustomerName AS [Customer Name], tblArea.Area FROM (tblCustomer LEFT JOIN tblArea ON tblCustomer.[PhysicalAreaId] = tblArea.[AreaId]) INNER JOIN tblWebOrder ON tblCustomer.CustomerID = tblWebOrder.CustomerId WHERE (((tblWebOrder.Processed) Like [Forms]![frmSelectWebOrderToOpen]![txtOrderStatus]) AND ((tblWebOrder.WebOrderDate) Between [Forms]![frmSelectWebOrderToOpen]![dteStartDate] And [Forms]![frmSelectWebOrderToOpen]![dteEndDate]+1)) ORDER BY tblWebOrder.WebOrderId DESC;
I have the following "On Click"event on the list box
Code:
Private Sub lstWebOrder_Click()
lngWebOrderId = Me.lstWebOrder.Column(0)
DoCmd.Echo False
DoCmd.Close
DoCmd.Echo True
End Sub
When I click on some of the records on the list box the form closes. On some of the records I get a parameter prompt to enter:
Forms!frmSelectWebOrderToOpen!txtOrderStatus
Forms!frmSelectWebOrderToOpen!dteStartDate
Forms!frmSelectWebOrderToOpen!dteEndDate
I inserted the echo commands to prevent this, but this has not worked!
Why am I getting the prompts? How do I prevent them?
General :: MS Access 2010 - Prompt To Enter Password On Closing Database
Nov 19, 2013I do not have a split db. I am prompted to enter my password when the db opens which is fine. However, when I close the db it prompts me to enter a password (not normal) and when I enter it it says invalid password. Also, when I try to change my password it says invalid password and when I try to compact and repair my db it say invalid password.
View 1 Replies View RelatedModules & VBA :: Refresh Linked Tables When Connection Lost Without Closing Access Database
Sep 4, 2014I have MDB database linked to SQL SERVER through VPN connection.I created links to the sql server Links are dsnless..Everything works fine but when I lost VPN connection or sql connection has been broken I can't refresh links to the tables.I receive message 3146 sql connection failed..I must close database and start again...
I tried different methods like ado,dao, and vba docmd.transferdatabase,aclink... but no success, table cant be relinked.
Only way I can relink is to change ip adress in conn.string
E.g. 192.124.0.2 (1st ip- router server ip) and after connection failed i can use 192.124.0.32 (2nd ip - server local ip) and that's it if i lost connection for the 3rd time... i must restart application.
It seems that access database keep the previous connection..how to reset or drop database connection to the sql server and refresh links to the tables with vba code without closing access database...
Forms :: Access 2010 - Opening New Form And Closing Current Form?
Mar 14, 2013 I am using Access 2010 - Version 14.0.61.29.5000 (32-bit)
I am building a custom Export Wizard to export data to Excel using the Report Wizard for the basic ideas.
All I am trying to do is have a [Back] button on a form to open another form and close the current form.
Private Sub cmdBack_Click()
DoCmd.OpenForm "frm_ExportWizardPage2", , , , , , Nz(Me.OpenArgs)
DoCmd.Close acForm, "frm_ExportWizardPage3"
End Sub
The new form is opening but then the current form is not closing. All forms are the same size, shape and positioned centrally although this should not make any difference.
Could this be anything to do with which form has the focus when I open the new form?
Opening & Closing Excel 2000 Workbooks From Access 2000
Jun 2, 2006I am opening and closing a series of Excel 2000 Workbooks using Access 2000 VBA and want this sequence to be able to complete without any human intervention.
However, there are 2 instances when this stops and waits for a human option to be selected:
1. When the spreadsheet is password protected
2. When the spreadsheet has automatic links I get the message:
"The Workbook you opened contains automatic links to information in another workbook. Do you want to update this workbook with changes made to the other workbook?"
How can I code it so that in situation 1 it skips this file and in situation 2 it automatically defaults to do not update?
Any help most appreciated.
Dalien51
Error When Closing
Feb 26, 2006hi.
i'm getting an error that i can't source: "you attempted to open a database that is already opened exclusively by user so and so on machine such and such. try again when the db is available."
i'm getting this when i close the db. the default open-option is shared, not exclusive. this is a single home computer. it doesn't happen all the time but (too) often. any ideas to stop this? :confused: (i've seen a few threads that are all network-related).
w
Better Way Of Closing My Database?
Jun 15, 2006Current Situation:
Right now when I close a form it will save the data and close.
Problem:
When somone goes in and messes up on something and they just want to exit without saving they cant do that. The data could have been changed and one may not remember what it was!
Solution Ideas:
I am thinking that a pop up window that says "Save Changes?" Yes/No then have it save or not. Could somone give me the details on how to do this or anything else that would solve this issue. Thanks.
Closing Database
Mar 27, 2007Hi there
My Access Db is working perfectly fine. But when I close it , it pops up message box saying ‘Database already exist’.
Any Clue?
Thanks
Danny
Closing Tables Etc Using VBA
Jul 11, 2007I wish to detect is there any opened tables, queries, forms, reports, pages(item that may potentially locked the table), and close them automatically using VBA. How to do this?
View 2 Replies View RelatedClosing Mdb Interfaces ..
Aug 26, 2007Hi Friends,:)
3 small questions I need your help about ACCESS 2003 :
Note: I'm using a workgroup for users access through the network and the
.mdb located in PC as a server NO Front-end & Back-end .
1. Is there a software that can close the .mdb interfaces or forms in all
users PCs ? for design modification in case of a user left the work without closing the DB.
2. Could the users use the internet OR Intranet for fast or better access to the .mdb ?
3.In case of (Front-end & Back-end) strategy , How can I modify the forms since each user has its own ?
Kind Regards,,
Closing A Subform
Feb 14, 2005Hello,
I need to close a subform to update the controls on it (deleting and adding), and without closing the main form; without using the "visible" propriety.
Thanks
Closing A Form Vs. Really Closing A Form
Feb 17, 2005This is related to some advice I received some time ago <a href="http://www.access-programmers.co.uk/forums/showthread.php?t=64818">here<a>
I am runnign some code, it performs some applications, then, if a Count Field is greater than 1, a form opens as a dialog, displaying some information:
Dim A As String
A = "NewForm"
If Me.[Count] > 0 Then
DoCmd.OpenForm A, acNormal, , , , acDialog
End If
If Me.Continue = "No" Then
Exit Sub
End If
The new form opens, and you can either view it, and click continue, which will run the rest of the code, or you can click quit, which updates Me.Continue to "No", and then it exits.
The problem is, when it exits the Sub, it doesn't really stop the code, it just leaves things kind of hanging. When I try to run the code again, I get:
3321 - The database engine could not lock the table 'NewTable' becuase it is already in use by another person or process.
Another symptom - The original form where I click to start running the code, has two date fields. Normally, when this form opens, they are blank, but when I exit the sub, as above, the previous dates I entered are still sitting there.
How can I make the forms really close?