Code Works In Excel But Not In Access
Sep 2, 2004
I have an Excel macro that formats a chart and I have tried copying and adapting it for Access.
The following line is executed OK in Excel :
Select Case ActiveChart.SeriesCollection(Counter).Name
I have changed it to the followig for Access
Select Case Me!DERVGraph.Object.Application.Chart.SeriesCollec tion(Counter).Name
but in Access I get an error 'Object does not support this property or method.
(The space shown in SeriesCollec tion above is a screen bug)
Any ideas?
Thanks
View Replies
ADVERTISEMENT
May 12, 2005
Can someone please help me. I was in the code view of my database and accidentally deleted a few lines of code and now everything i do is coming up with the same error message
Module Not Found
For every form I try to open it does this and even my buttons to close form and to exit system do not work.
Has anybody had this problem before?
Would anybody mind taking a look at it if I sent a zipped version? my email and msn is nicholaseary@hotmail.com
View 2 Replies
View Related
Nov 5, 2014
I have the following code that creates a long string that works most of the time but sometimes gets cut short. I can't understand why it does this. When it cuts the string short it cuts it short in the same place. Everything gets in the string up to/or about the following code '</Practice Name>'This string is needed to upload info to a server.
Code:
dim msg as string
msg = "<?xml version=""1.0"" encoding=""utf-8""?>" & vbCrLf & _
"<soap:Envelope xmlns:xsi=""http://www.w3.org/2001/XMLSchema-instance"" xmlns:xsd=""http://www.w3.org/2001/XMLSchema"" xmlns:soap=""http://schemas.xmlsoap.org/soap/envelope/"">" & vbCrLf & _
" <soap:Body>" & vbCrLf & _
" <UpdateDataForScreens xmlns=""http://mdtoolboxrx.com/"">" & vbCrLf & _
" <PatientObj>" & vbCrLf & _
[code]....
View 10 Replies
View Related
Jun 6, 2012
I have an excel file I need to read and update a column in an access table. But the data I need is in a combined format like AA-000, BB-001 etc.
I need to separate the values AA, BB as one column and 000,001 as another column. How do I write code to accomplish this in a module in VBA.
So the tasks I need to do is:
read in the Excel file
split the data in a column in to two columns
update the already existing access table with the data in the two new columns.
View 2 Replies
View Related
Aug 9, 2013
Need importing just 1 column from excel file into vba !
View 1 Replies
View Related
Dec 13, 2011
Is there anyway to import my excel spreadsheet which contains command buttons with vba code into access?
View 2 Replies
View Related
Sep 28, 2013
I am just starting out learning how to connect Access to Excel. From an Access form, I need to connect to an Excel spreadsheet, and loop through every row/column to look for data that matches a database field data, then populates the associated cell data. I don't want to import the spreadsheet since the user who created it is using it manually, and I am attempting to automate the task. This is probably the most elementary code, but I would like to start out with the best way to do this. What I am finding is code that appears to be much more complicated than I need, for more complicated situations.
View 2 Replies
View Related
Aug 16, 2005
I have installed on my PC, WindowsXP sp.1, MSaccess versions 97 and XP.
After I have tested some databases, MSaccess 97 don't works successfully more, but XP version works good. I can't modify files mdb. Access works like in run-time mode: bars and commands reduced, standard icon of access absent, database window absent, ecc.
If macro autoexec or a form that play at the start of mdb are present, mdb works but it is impossibile to modify it. Otherwise mdb dont works, I can see access window with only menu files and window.
I have removed access and after yet installed it, but it don't work successfully.
maybe other application leaved files (or modification in file registry) that install procedure of access97 cant rewrite? And that dispose access 97 to work in run-time mode (or like)?
I am hopeless. Can You help me? Can you give me a list of files to remove, or list of modification to do in registry?
Danit :
View 4 Replies
View Related
Aug 25, 2004
Can anyone recommend two good books which it should include the knowledge from Beginner to Advance level.
1. Microsoft Access
2. VBA to work with Access
View 1 Replies
View Related
Apr 5, 2006
Situation: I have written a fairly straight forward nested query which aggregates sales & activity data (num_calls, date, etc.) by customer specialty (CODE_ESP_ACC1) in a single query. The SQL I have written to achieve this is as follows:
SELECT Q002.GP, Sum(Q002.Num_Calls) AS Total_Calls
FROM (SELECT Q001.CODE_ESP_ACC1, Count(Q001.ACT_ID) AS [Num_Calls], Iif([Q001].[code_esp_acc1]="MG" or [q001].[code_esp_acc1]="MF",1,0) AS GP
FROM (SELECT [06 Act 2005 Hosp - IM].ACT_ID, [06 Act 2005 Hosp - IM].TER, [06 Act 2005 Hosp - IM].ACC_ID, [11 Physicians with main specialty].CODE_ESP_ACC1, [06 Act 2005 Hosp - IM].DATE
FROM [06 Act 2005 Hosp - IM] LEFT JOIN [11 Physicians with main specialty] ON [06 Act 2005 Hosp - IM].ACC_ID = [11 Physicians with main specialty].ID_ACC
WHERE ((([06 Act 2005 Hosp - IM].POSITION)=1))) AS Q001
GROUP BY q001.code_esp_acc1, Iif([q001].[code_esp_acc1]="MG" Or [code_esp_acc1]="MF",1,0)
HAVING (((Q001.code_esp_acc1) Is Not Null))) AS Q002
GROUP BY Q002.GP;
This works absolutely fine. I can save this query and run it many times without problems. However, if I then re-enter SQL edit view, Access reformats it as follows:
SELECT Q002.GP, Sum(Q002.Num_Calls) AS Total_Calls
FROM [SELECT Q001.CODE_ESP_ACC1, Count(Q001.ACT_ID) AS [Num_Calls], Iif([Q001].[code_esp_acc1]="MG" or [q001].[code_esp_acc1]="MF",1,0) AS GP
FROM (SELECT [06 Act 2005 Hosp - IM].ACT_ID, [06 Act 2005 Hosp - IM].TER, [06 Act 2005 Hosp - IM].ACC_ID, [11 Physicians with main specialty].CODE_ESP_ACC1, [06 Act 2005 Hosp - IM].DATE
FROM [06 Act 2005 Hosp - IM] LEFT JOIN [11 Physicians with main specialty] ON [06 Act 2005 Hosp - IM].ACC_ID = [11 Physicians with main specialty].ID_ACC
WHERE ((([06 Act 2005 Hosp - IM].POSITION)=1))) AS Q001
GROUP BY q001.code_esp_acc1, Iif([q001].[code_esp_acc1]="MG" Or [code_esp_acc1]="MF",1,0)
HAVING (((Q001.code_esp_acc1) Is Not Null))]. AS Q002
GROUP BY Q002.GP;
... and this no longer works (syntax error in FROM statement).
To save you sifting through the SQL, the error is caused by Access replacing the soft brackets () aroung the outermost FROM statement with an object identifier-style hard bracket []. - specifically, the outermost SELECT statement now reads
SELECT Q002.GP, Sum(Q002.Num_Calls) AS Total_Calls
FROM [
instead of
SELECT Q002.GP, Sum(Q002.Num_Calls) AS Total_Calls
FROM (
and the alias for the subquery reads
]. AS Q002
instead of
) AS Q002
Changing the Access alterations back to my original fixes this problem - so the problem is more an annoyance than a disaster. However, I have no idea why Access is doing this to my query, nor how to prevent it from doing so. Does anybody have any experience of this behaviour in Access and any ideas of how to fix it?
Help! Replies appreciated.
View 1 Replies
View Related
Jun 24, 2005
Hello..
I got the following code from this forum to create shortcut on the desktop..
==================
Set objShell = New WSHShell
Set objShortcut = objShell.CreateShortcut(objShell.SpecialFolders("AllUsersDesktop") & "" & sShortcut)
objShortcut.TargetPath = sDB
objShortcut.WindowStyle = "3"
objShortcut.SAVE
=================
I have Access 2003..but file format is 2000 because others have access 2000.
This code works great on my machine..but getting error on access 2000 machine..It does not recognize "New WSHShell" in the above code.
-------------------error message
Compile Error:
User-defined type not defined
-------------------
Any references needs to be added?
Please help...Thanks..
View 1 Replies
View Related
Nov 19, 2014
I have recently upgraded to Access 2013 and this has updated all my object library references to 15.0. The problem is that my colleages are still using Access 2010 and when they try to use the database they are receiving a missing reference error.
I have removed the Excel reference but this gives me the 'object type not recognized' error when running the code.I have tried to download the 14.0 reference libraries in order to add them back in but for some reason the installer doesn't work.
View 3 Replies
View Related
Sep 25, 2014
I have a report exporting to excel using late binding techniques. When exported into excel i have numbers for 1,2,3,4 tblPreSiteSurveys. PreSiteSurvey Stop TheClockReason entitie and I am trying to either change the numbers here casting from int to string
1 = a
2 = b
looping through the record set, Or i have a blank field in my SQL for the column "P" and adding the formular to that column, but it only goes into the first row of the record set, which is a expandable table.
On Error GoTo Command29_Click_Err
'Utilergy Master Update report
Dim db As DAO.Database
Dim rs As DAO.Recordset
Set db = CurrentDb
Dim UserDate As Date
[code]...
View 12 Replies
View Related
Jun 22, 2015
I am trying to transfer daily data that I get from three different queries all into one Excel sheet. I take it that you have to make one over-arching query which I have made called Awaiting Base.
View 4 Replies
View Related
Nov 12, 2014
I'me running on Win7, Office 2010, Acc2003 format (.mdb), writing data to Excel 2010 (.xlsx)I have code to create an Excel file, send record set data to it, and then add some formulas and formatting. I was trying to tune up the formulas, when I got a pull back:Access VBA code suddenly stops running, and the file gets displayed in Excel
Code:
'ApXl is Application.Excel
'xlWSh is the Excel WorkSheet
'rst is my DAO.Recorset
[code]...
The same happens when I have ApXl.Visible = True
View 10 Replies
View Related
Apr 25, 2013
I am using Excel and Access 2010.
I have an excel spreadsheet with 8 tabs. They are all in the same format and column order. They are employees grouped by region. My ultimate goal is to merge all of these onto one excel tab, relatively instantly. I created a master tab and tried doing array formulas and Vlookups, it worked but my spreadsheet was way too slow.
My solution? Import and link them to an Access database, step complete. Create an XML export then import into Excel.
My problem? The only way to update the excel tab with the combined tabs is to save the excel file after changes, go back into Access, re-export to XML, then go back into excel and refresh the data.
My questions, is there any way to automate this process to the point that I can change excel, save, then hit refresh on my excel tab with the XML import to auto-update?
View 7 Replies
View Related
Mar 12, 2014
What I want to do instead is open an existing .XLSM wokrbook delete or update the 7 sheets it creates and replace them with the new query results from access.
I love this code below because it works really well but now I have a new requirement. I have a workbook that has a "dashboard" sheet that looks at the sheets from acccess and summerizes the data. So, I'd like Access to open that "template" excel workbook and delete the old sheets and put in the new ones..The required sheets to keep are called "Metrics", "Validation" and "Mara"
What I was trying to do for the past few hours was another work around which was to have Access run this code, then excel run some code to import the "dashboard" formulas but I can't get it to copy to another workbook because it links to the OLD workbook..Here is the working code that needs modding:
Code:
Option Compare Database
Public Function ExportAdvanced()
Dim strWorksheet As String
Dim strWorkSheetPath As String
Dim appExcel As Excel.Application
Dim sht As Excel.Worksheet
Dim wkb As Excel.Workbook
Dim Rng As Excel.Range
Dim strTable As String
Dim strRange As String
Dim strSaveName As String
Dim strPrompt As String
Dim strTitle As String
Dim strDefault As String
[code]...
View 3 Replies
View Related
Oct 24, 2013
I've been using the following code successfully in Access 2003 & now I need to migrate to Access 2010. The purpose of the code is to use the items that the user selects in the list box to build the criteria of a query. Access 2010 keeps giving me a syntax error when I try to run the query & I don't know why:
My code is:
On Error GoTo Err_Command151_Click
' Declare variables
Dim db As DAO.Database
Dim qdf As DAO.QueryDef
Dim varItem As Variant
Dim strCriteria As String
Dim strSQL As String
[Code] .....
The syntax error I get in Access 2010 is:
Syntax Error in query expression 'SELECT * FROM
qryContractListSummarybyDateContract3TYPEBREAK WHERE
qryContractListSummarybyDateContract3TYPEBREAK.Rep ortableName IN('Adbri
Masonry NSW');'
View 12 Replies
View Related
Jul 23, 2007
Iam using the following code for inserting the values from access form in to the access database table ITEMS, but iam getting compile errors, may i know where iam going wrong in the code.
Also help me in updating, deleting and viewing of records from database table ITEMS to the form when i run the program.
Following is my code :
Private Sub ADD_Click()
On Error GoTo Err_ADD_Click
Dim cn As ADODB.Connection
Dim rs As ADODB.Recordset
Set cn = CurrentProject.AccessConnection
'Create an instance of the ADO Recordset class, and
'set its properties
Set rs = New ADODB.Recordset
With rs
Set .ActiveConnection = cn
.Source = "SELECT * FROM ITEMS"
.LockType = adLockOptimistic
.CursorType = adOpenKeyset
.CursorLocation = adUseServer
.Open
End With
'Set the form's Recordset property to the ADO recordset
DoCmd.RunSQL "INSERT INTO ITEMS(ITEM_CODE, ITEM_NAME, ITEM_CATEGORY) VALUES('" & ITEM_CODE.Text & "','" & ITEM_NAME.Text & "','" & CATEGORY.Text & "')"
Set Me.Recordset = rs
Set rs = Nothing
Set cn = Nothing
Exit_ADD_Click:
Exit Sub
Err_ADD_Click:
MsgBox Err.Description
Resume Exit_ADD_Click
End Sub
compile ERROR as follows:
you can't reference a property or method for a contro unless the control has the focus.
View 13 Replies
View Related
Oct 21, 2012
how i can export the data from Access to excel using Access VBA for the specified sheet using data linkage with access database. Like we used to do it manually in excel as external data from access.Like we have some codes for linking excel file to database mentioned below;
DoCmd.TransferSpreadsheet acLink, , "region", "F:DB PracticeBook1.xlsx", False, "region"
Can we have something like this to link database table in excel file automatically.So that the excel size won't be that big and also it saves processing time.
View 5 Replies
View Related
Sep 13, 2007
I have a stock control database which i have nearly completed. This has Manufacturer, which is linked to products, which is linked to Sub Product(which also has field partCode). i.e. Manufacturer1 can have 3 products, and each of these products could have 5 subsystems and partcodes. Each partcode is unique to that subsystem/product/manufacturer.
I then have a pricing spreadsheet in excel, which has many tabs. A new column has been added for each item for Manufacturer,Product,Subsystem and Partcode.
I need to import these manufacturers,products,subsystems and partcodes, but into the tables with the correct relationships, i.e. product1 and product2 are products of manufacturer1 and so cannot come under manufacturer2, and so on.
I hope this makes sense, Thanks in advance for any help you can give!
Emily
View 14 Replies
View Related
Aug 23, 2005
There is an Access application somewhere in shared drive.
100 users open this application using a batch file which copies this database on their c: . They start using this database and the master database gets replicated real time. I am not sure if all the database are replicated as it is copied everyday ( so that each one of them has latest version of the application )
Is it possible ( I know it is :) ) but i am not able to figure out how it is happening.
Please help :confused:
View 2 Replies
View Related
Dec 9, 2005
What would trigger an error to occur if there has been no changes to a DB.
My error # is 2427 (You entered an expression that has no value).
This error occurs when I click on a command button to open a report. When I debug, it sends me to an IF statement that I have loaded in the On Format of the report.
This worked perfectly fine before - the If statement is simple, if a value is true, then it changes a box to bold and if the value is false, the box in the report remains the same weight.
I am not understanding why it is saying that I have entered an expression with no value when the IF statement reads both the true and the false of a chkbox and adjusts the box accordingly.
Can someone explain why this is occuring? Im litteraly stuck.
View 14 Replies
View Related
Dec 27, 2005
Hi,
I have a form which has two separate subforms in it. When the user selects a record in the first subform, I want the values of that record to write to the second subform's fields. OnCurrent works when there is more than record in the subform. My problem is two fold, one I don't want my copy code to run when the form loads and I need it to copy a record when there is also only one record in the subform.
Which event do you recommend?
Also, does anyone have a suggestion on how to allow the user to tab through a form, but really only record by record (with the keyboard) and not having to go through all the fields before getting to the next record.
Thank you,
Colette
View 1 Replies
View Related
Jun 30, 2006
Hi, I'm a little confused here. I'm using the following on one DAP and it works just fine. When I add it to another page, it does not work. Any ideas?
<SCRIPT language=vbscript event=onclick for=Save>
MSODSC.CurrentSection.DataPage.Save()
msgbox "Record Saved - you may continue to edit or exit your browser.",64,"Saved"
</SCRIPT>
Thanks...Doug
View 1 Replies
View Related
Apr 18, 2006
Hi All,
I have a text box (memo field) that the user enters a description. This is sometimes more then one paragraph. In a text box you cant hit enter and goto the next line (or paragraph). I would like to to this? can it be done?
Thanks
View 1 Replies
View Related
