Combining Rows From Multiple Tables Into A New Table
Nov 21, 2006
I have three tables, with the following data (fields separated by "-" here):
Unit - Customer Number - Customer Name - Type of A/R - Total A/R
Unit - Customer Number - Customer Name - Type of A/R - Total Overdue
Unit - Customer Number - Customer Name - Type of A/R - > 90 Day Balance
I would like to combine these tables into one table with the following field names:
Unit - Customer Number - Customer Name - Type of A/R - Balance
When I append the data, it comes out like this:
Unit - Customer Number - Customer Name - Type of A/R - Total A/R - Type of A/R - Total Overdue - Type of A/R - > 90 Day Balance
I would like this new table to include all rows from the original tables, sandwiched on top of each other. As far as I can work it, the Append Query only adds the data as add'l columns; not as add'l rows. I tried changing the field names entirely, so that the final field in each table is called "Balance." However, I still get the same result as above - the columns are added, instead of rows. I swear there's a way to do this, I just can't remember it!
View Replies
ADVERTISEMENT
Jun 5, 2007
Hello All,
I am trying to figure out the best was to combine fields from multiple rows into one row & field.
Example: I have a table that contains footnotes and products. With a simple query I would get the following 3 rows:
Product........................................... .......Footnote
V.I. Capital Appreciation Fund.................3
V.I. Capital Appreciation Fund.................5
V.I. Capital Appreciation Fund.................1
What I want is one row and the 3 footnotes combines into one field:
Product........................................... .......Footnote
V.I. Capital Appreciation Fund.................3, 5 ,1
Any help would be greatly appreciated.
View 14 Replies
View Related
Jul 16, 2007
Here is the situation that I'm hoping that someone can help me with. I'm working with a database that tracks our condo units - from prospect coming into the system until we close them as a buyer. All the units are setup in the system so a salesperson will select from the units available. All that works fine when I create reports. The problem is trying to get the parking and storage on the same reports with the unit information. The problem is that there are multiple parking/storage units "attached" to a single unit and I cannot figure out how to get them to all appear on a single row of the report. As an example -
I have units A, B, C
Parking units p1,p2,p3,p4,p5,p6
Storage units s1,s2,s3.
Unit A uses parking units p1, p2, p5 and storage unit s2.
Unit B uses parking unit p3 and storage unit s1.
Unit C uses parking unit p4, p6 and storage unit s3.
How do I write a query/report that would show:
Unit Parking Storage
Unit A p1, p2, p5 s2
Unit B p3 s1
Unit C p4,p6 s3
Thanks,
Chester Campbell
ccampbell@jfreed.com
View 3 Replies
View Related
Jul 17, 2014
I have a database which is importing several Excel workbooks, each with multiple worksheets. Every workbook has 20 worksheets, with the same 20 worksheet names. When they are imported they come in as one table for each worksheet, named tblWorkSheetName_X with X starting at 1 and increasing for each worksheet brought in with the same name. So if the worksheet names are A-T I have tblA_1 through tblA_6 and likewise for B - T.
I would like to combine all of the tables which come from similar worksheets into one table (one table per name).
I.e. I want to combine the data in tblA_1 through tblA_6 into a singular tbl_A and likewise for tables B through T. So in the end I will have one table for each worksheet name A-T. t how to code this successfully?
View 14 Replies
View Related
Jul 17, 2013
I trying to combine three columns that I have into one column without combining fields.
Currently what I have:
(see image below)
What I want:
ID-----MOC
##----name1
##----name2
##----name3
##----name4
##----name5
etc
The list I have will be much longer and will be changing frequently, which is why I can't just go on excel and manually do this.
View 14 Replies
View Related
Feb 19, 2008
I want to count based on 1 (same) field from each of two tables, based on if ID is in "X".
select a.groupid, count(a.id), count(b.id)
from ta a, tb b
where value in ('a','b','c')
group by a.groupid
Thats sort of the psuedocode but Im not getting the right results.
Any help would be appreciated.
View 6 Replies
View Related
Aug 8, 2014
I'm trying to set up a way to import and combine excel files that contain multiple data sets. So for example, each excel file has a summary heading which consists of the first 3 rows.
Each data set thereafter consists of approximately 50-60 rows of data that I would like. There are approximately 1400 groups of data. Each group has a label which includes the state and the store number. I would like to automate a way to copy the state and store number information down each data set as well.
I have approximately 200 excel files that I want to load into access and have it format it so it basically will end up 1 big file with State, Store Number, relevant information from the data set. I've seen a module do this before, can't remember how to do it.
View 4 Replies
View Related
Nov 3, 2004
Hello:
I'm new to Access but not SQL, and am having difficulty coming up with a solution to the following problem:
I have one table for all Strings used in all other tables (to make Internationalization easier). The fields are: zId, zType, and zString. zId is an AutoNumber field. zType is a number which defines what type of string it is ( Item Name, Person Name, etc. ). zString is a text field with the actual text string (can be empty).
I have another table for Items, which have (among other things) Names (field name= zName). zName is actually a lookup into the Strings table and stores just the ID.
I want to create a form for people to enter a new Item. When creating a new item using this form, they will have to give it a Name, which will need to add a new entry into the Strings table with the appropriate type (ie, Item Name).
So, my question is "How to do the following..."
* on my form to enter Item Data, when a user goes to create a new Item, I must first create a new entry in the Strings table with the correct value for zType. Then, I must get the value for zId for this new entry and assign it to the zName field in the Items table for the new record that I am creating.
Any help is appreciated.
_C
View 2 Replies
View Related
Jan 30, 2008
I have what is probably a simple thing to do in a qry but I just can't figure it out.
I have a spreadsheet that I imported into access. The basis of this spreadsheet is just basic company info.
Company|Address|City|State|Zip|Name
AAA Comp|123 Street|Anywhere|CA|90210|Mr. Somebody
ABC Comp|345 Street|Anywhere|CA|90210|Ms. Somebody
ABC Comp|345 Street|Anywhere|CA|90210|Ms. Anybody
ABC Comp|345 Street|Anywhere|CA|90210|Mr. Anywho
XYZ Comp|678 Street|Anywhere|CA|90210|Mr. Whosthat
For some companies, the information will repeat, like ABC Comp. What I need to do is to combine the rows with the same company information ie:
Company|Address|City|State|Zip|Name
AAA Comp|123 Street|Anywhere|CA|90210|Mr. Somebody
ABC Comp|345 Street|Anywhere|CA|90210|Ms. Somebody, Ms. Anybody, Mr. Anywho
XYZ Comp|678 Street|Anywhere|CA|90210|Mr. Whosthat|Pres.
Is there a way to do this in a qry?
Thanks in advance!
View 3 Replies
View Related
Aug 29, 2014
I am trying to merge data from multiple rows into one row for each unique ID. I can replicate on how to do this on a table, maybe a query or something like that. Attached img shows
View 3 Replies
View Related
Oct 11, 2006
Hi
I have several small tables that I want to make combine into a big table.
How do I do this - is the only way by using a query?
Maria
View 2 Replies
View Related
Aug 16, 2013
My Approach database contains records relating to nearly 800 sites in London. There are radically different amounts of data held about each site. The database contains a lot of different tables, each containing a different class of information. Not all the sites listed in the database have information in all of the tables.
The unique thing that holds it all together is the unique site reference number. Unfortunately this is split into two separate columns in the Approach database, "Reference" and "Suffix". Not all sites have a suffix. (The purpose of the suffix is to identify sub-sites which are subordinate to the main site reference, but need to have their own individual records.) Because many sites have no suffix, most of the fields in the second column are blank.
In order to link all the tables together in access I need a Primary Key which is unique to each site. In this case the reference/suffix number is the obvious (only) candidate. There is no problem using two different columns to create a primary key. The problem I face is that it doesn't like the fact many of the fields in the second column are blank.
My solution to this is to combine the two columns into one. That would give every site a unique reference, and none of the fields in the combined column would be blank. Can I work out how to do it? All I want is a new column that displays the reference and suffix (if any) in a single field, no spaces.
View 2 Replies
View Related
May 12, 2013
So in my example you have a Weld (tblWelding_WeldingID) and each weld can have more than 1 consumable (tblconsumables_consumableID). have a third table that links the two, trackID,consumableID, weldingID)
What I need to be able to do in a report, is under the heading COnsumable, list the 1 or many consumables.
Also you select the consumable from a combo box..... if that just makes it that much harder...
View 2 Replies
View Related
Jun 17, 2013
I am working with an Excel file of raw data aggregated from an annual customer relationship survey that has been sent out since 2010. The file has approximately 20,000 rows, meaning the survey has been taken around 20,000 times. Unfortunately, each time a customer takes the survey, it is included in the raw data as a separate entry. Therefore the file has numerous duplicate email addresses, corresponding with unique data for each time the survey was taken. Another issue regarding the data, is that in the first year the survey was sent out, the distribution mechanism "broke" and the survey was sent out multiple times (and completed multiple times) in the same year by the same customer, so the surveys are not necessarily uniformly distributed, if that makes sense.
I have been interested in isolating the common respondents (those who have taken the survey across multiple years, albeit not necessarily consecutive years). Up to this point, these respondents have been isolated manually using a pivot table, however I am now looking to enter the raw data into SPSS (a statistical analysis package), in order to view the drivers of these common respondents.
Therefore, I would like to be able to isolate these common respondents and the data corresponding with their surveys from the raw data in a separate worksheet or file. I have tried various formulas to do so in Excel to no avail. Is there anyway to accomplish this in Access or would a more complex database be needed?
Ideally the final product would have the common respondents' information from multiple surveys in one row and would be able to be filtered by feedback date (found in the raw data), so that hypothetically one could select a month and be able to tell how many customers considered to be common respondents completed a survey within that month.
View 8 Replies
View Related
May 20, 2013
I am a beginner in SQL, I have a problem regarding combining rows/ columns having value. Below is my example:
Table1:
1 123 23 43
1 234 3 431
2 34 34 34
2 54 3 123
3 1 32 32
2 341 1 32
Output Table:
1 123 23 43 234 3 431
2 34 34 34 54 3 123 341 1 32
3 1 32 32
or instead of combining rows, getting the result by combining columns with the same condition.How can I obtain such result?
View 3 Replies
View Related
Nov 10, 2014
In a situation where I imported an excel file with so many columns and split them into two temp tables and they are linked using a key.
the data has a fixed part lets say
Field1....Field2.....Filed3.....Field4...then Field5.....Field6.....Field7....Field8 is the same data range as Field9...Field10...Field11...Field12. I would want to split this data into multiple rows like this
Field 1 Field2 Field3 Field4 Field5 Field6 Field7 Field8
Field 1 Field2 Field3 Field4 Field9 field10 field11 field12 and so own...
What is the best approach?
View 3 Replies
View Related
Aug 23, 2013
I have 10 tables. None of them have any entries in them. Just field names. Is there a way to combine them all into one table.
View 14 Replies
View Related
Oct 5, 2013
the assignment is to delete rows in a table that consist of employee ids 202 - 205
I input the following code:
delete from sec0412_foods
where employee_id between '202'
and '205';
And then I come across this error:
Where am I making a mistake?
View 3 Replies
View Related
Jul 10, 2013
I have two tables. One table is a list of classes with the number of enrolled students:
Class............StEnrolled
English 1A........6
English 1B........12
English 1C........20
English 1D........25
Reading 1.........4
Reading 2.........15
And the other table is a list of "combined" classes (meaning they are, essentially, the same class and should be counted as such):
Class...........CombinedWith
English 1A.......English 1B
Reading 1........Reading 2
Using the first table, I currently generate a query (and build a report) that displays class enrollment levels. What I need is for this query to identify combined sections from the second table and display them as such:
Class........................StEnrolled
English 1A/English 1B........18
English 1C.......................20
English 1D.......................25
Reading 1/Reading 2..........19
View 7 Replies
View Related
Mar 29, 2012
I have a database with all the hours employees have logged stored in the database. Our payroll company wants an excel spreadsheet that has very specific info in particular columns and fields on the excel spreadsheet, so I'm trying to design a query which will put the correct info in the correct fields per their system.
The challenge is, I have currently a query with Employee ID, Overtime Hours, and Regular Hours as separate columns.
I need to translate this to a query with a single column for hours and a separate column that designates those hours as OT or Reg, with two rows for those employees who have both types.
Current:
ID / Regular Hours / OT Hours
101 / 70 / 7.5
102 / 30 / 0
103 / 5 / 0
Needed:
ID/ Hours / Type
101 / 70 / Reg
101 / 7.5 / OT
102 / 30 / Reg
103 / 5 / Reg
I don't know how to create a query or a formula in a query to break out each employee row into multiple rows with different data in the hours column. It seems like there's something pretty straightforward that I've done in a similar vein but it doesn't seem to work - I can do the opposite and combine those hours by using the SUM function in a query, but I can't seem to break it out this way.
Access 2007, Windows 7.
View 5 Replies
View Related
Oct 16, 2006
HELP! I’m working for a charity in a small town Tanzania and there is not a soul for miles who knows anything about access.
I have created a database to track requisitions of Office Supplies. I have table full of the requisitions which contains multiple rows for each item we have in the store and the quantity requisition on each occasion.
What I want is a query that will calculate the total quantity of each item requisitioned in a month. Is there an easy way to do this??
View 1 Replies
View Related
Dec 22, 2014
I have a table with multiple rows per member that I would like to convert to 1 row per member. I have a table that looks a bit like this:
Member_IDDiagnosis
10000Hypothermia
10000Frost Bite
10001Fatigue
10001Dehydration
10001Exhaustion
99999Exhaustion
99999Hypothermia
And I'd like to convert it to this:
Member_IDDiagnosis - 1Diagnosis - 2Diagnosis - 3Diagnosis - 4
10000 HypothermiaFrost Bite
10001 Fatigue DehydrationExhaustion
99999 Exhaustion Hypothermia
The columns don't line up well but I am looking for each diagnosis to move into one of the 4 columns, depending on whether it is the first, second, third or fourth diagnosis associated with the member.
View 3 Replies
View Related
Sep 12, 2011
I am trying to copy multiple rows (150+) and then paste them into the same table below the original 150 rows.I can only seem to get 1 row at a time.
View 9 Replies
View Related
Sep 20, 2006
Hi,
I am using VB.NET 2003 and MS Access XP for a desktop application. While developing the application we have a reached a situation where we want to print a report which retrieves records from four tables. Till here it is easy to think that it can be done by a simple SQL JOIN query, but following is the complexity:
The first table stores a single row.
The second table stores multiple rows related to the Primary Key field defined in Table One.
The third table stores a single row related to the Primary Key field defined in Table One.
The fourth table stores a single row related to the Primary Key field defined in Table One.
The above SAVE RECORD option is performed when a user fills a Form of my application. As stated above, all the four tables are inter-related with a Primay Key field (TNo) defined in table one.
I also have a MS Access Report that will print information retrieved from all the four tables. The Report has some of the fields from each of the above table. The SAVE operation is performed in this way:
(1) A unique TNo is generated for a new record that is about to be created.
(2) All the entries are saved in their respective tables (mentioned above.)
(3) An access query will fetch the records pertaining to this TNo from all the tables to fill the report.
I want to know how to write such a query when I have to fetch multiple rows of a table in between. Is there any way that I can pass the TNO as a parameter to this query that is saved in MS Access?
View 1 Replies
View Related
Apr 15, 2014
I have a table with the following columns: Task, Visa type, time it takes to perform the task. There are several taks that are performed for all visa types. I want to create a form to enter data to the table in which for the field visa type I have a list box that can allow multiple values, however, I do not to create a single line with the task and on visa type all the types of visas selected. I want to create a line for each type of visa with the information introduced.
I don't know if this is possible, the reason for which I want for the form to create several rows depending on the visas types is because then I have a query that sums all the types of visas. Can this be possible? I don't want the people to introduce manually directly to the table the data and also that for the same taks they have to enter manually 50 rows with values. I want it to be more simple and easier.
View 3 Replies
View Related
May 19, 2014
I have imported 3 different excel worksheets into Access. I then created a query in which I made some relationships and select the fields that I need to make a new table. The problem is, when I run the table the final product is missing about 20,000 rows of data. I have used this protocol successfully for other other files, but for some reason, with this dataset Access is pasting 10,000 rows into the new table, where the original file has 39,000.
View 1 Replies
View Related
