Combo Bound Column To Word Bookmark Conflict
Jul 6, 2005
Ok....Just when you think it's all running smoothly.... :(
I have a combo box, MDLastName, with a column count of 9, with column 2 displaying and all others hidden. The selection made with this combo populates 7 corresponding fields (first name, address, etc). It's working perfectly.
The first problem I encountered was with identical last names, but different corresponding data. When I selected Jones, for example, it would populate the first Dr. Jones and his info, listed in the table. However, if I selected the second Dr. Jones in the combo list, it was still populating only the first Dr. Jones' info. I resolved this by binding the fist column (ID, aka primary key), but still hiding all colums but column 2. First problem fixed..
Next, I have a Word Template document bookmarked to receive data from the form, frmDenial. I have all the coding working fine and dandy to insert the data from the fields on the form, save, and print. However, instead of inserting the text from the MDLastName, it is inserting the primary key (because it is the bound column in the combo box). Now, because of the first problem discussed above, I cannot change the bound column to column 2 (containing the data I need in the Word Template). How can I get the right info to appear in my template with the bookmarks?
View Replies
ADVERTISEMENT
Nov 9, 2004
I have a combo box that has two columns, the second one is bound.
Is there any way to reference the 1st column (the unbound one).
What I actually want to do is have the 1st column show up as a status line message or as a quick help message when the combo text is mouse_overed. The problem is the combo box field is a date that is unique 99 % of the time but in that one percent the user needs to see the beginning of the 2nd column ( think of a persons doctors appointments, where one percent of the time a individual needs to visit the same doctor twice in one day , in which case the procedure and the date becomes the selection criteria (but I don't want to show the procedure and the date in the combo box because the procedure is so darn long.)
Confusing enough?
Any ideas?
Thanks
View 1 Replies
View Related
Nov 21, 2013
I'm looking for a work around for getting the bound column setting for a combo box to work. I created a simple table with 2 fields that i have a combo box pointed to. My settings for the combo box are
Column count 2
Bound column 2
The first field is "Description"
The 2nd field is "ID"
I cannot figure out how to have column 2 to be the value that is left in the combo box once I have made my selection.
View 14 Replies
View Related
Mar 15, 2014
There are 3 column in a combo box, ID is bound column
Part no ID Description
0040 1 class 40-1
0040 2 class 40-2
0040 3 class 40-3
0041 4 class 41-1
0042 5
0042 6
When key in part no 0040, 3 rows under 0040 will be listed out only, filter and match as value entered only. do not show others part no in the combo box selection.
View 1 Replies
View Related
Jul 9, 2014
In my form my combo box displays a list from a query called DORP-HDR that has 3 columns
DORP-ID | CODE | NAME
and displays them like that is the drop down list
The form field that the combo is bound to takes the numeric-id field as its value. In the combo control wizard i nominated that value, and in the properties pane bound column value is 1.
and in the properties pane the row source is:
SELECT [DORP HDR].[DORP-ID], [DORP HDR].[CODE], [DORP HDR].[NAME] FROM [DORP HDR] ORDER BY [NAME];
So far so good. I have created lots of combo boxes before like this.
But this time i want the second field in the list (CODE) ALSO bound to another field in my form . So I want the combo to transfer two values not one. How do i do this?
View 4 Replies
View Related
Feb 1, 2013
I understand how to pass text boxes to bookmarked locations in Word, but when it comes to combo boxes, list boxes, or option buttons, I am lost. So, my problem this time is the following:
I have an access user form that is asking the user to input data and make selections. Once entered I am trying to get everything to export directly to respective bookmarked locations in a Word Report. I have my text boxes working and I have the combo box now working. The issue I am experiencing is with the user making multiple selections from a list box and I am not really sure how to get that to export to the word document.
Here is what I have:
Code:
Dim strNames As String
Dim ctl As Control
Dim varItem as Variant
'ensure the user has made a selection from the testers name text box
If Me.testersNamesText.ItemsSelected.Count = 0 Then
MsgBox "You must select at least 1 Capability Testers Name"
[Code] ....
I am very new to trying to code with the Visual Basic side of things, I know this is probably the best method to do this but the issue that I am experiencing is receiving a Null error for the line with
.Selection.Text = (CStr(Forms!WebBasedIFV!testersNamesText))
And when I attempt to pass the strNames in place of the testersNamesText I receive that the user form can't find the field "strNames" referred to in my expression.
View 7 Replies
View Related
Jul 1, 2013
I'm currently running a replicated database in Access 2003 (plan on migrating to 2010; but have several users on 2003). I guess I pushed the number a fields within a table to be close to the 255 max and of course had a conflict in that table which put me over the top. Now if I receive the following error: "Cannot add a new column to conflict table 'Table_conflict'. Delete obsolete columns and compat the database."Since this will occur with all of my replicas is there a way do either automatically clear the data in the 'Table_conflict' or remove the table?
View 3 Replies
View Related
Feb 17, 2005
I have created a table with ole object types and linked word documents. I am now trying to create a report with the word documents showing up. The problem is that the size of the word document varies, some are half a page some are several pages. When I create the report with the object frame, I can't seem to find a control property to 'can grow'. Is there some way, possibly using VB, to create that feature. I'm thinking the VB way might be to access the embedded file and find out it's size and then size the object frame accordingly. I don't want to make the frame set to the largest document because then there will be blank pages that I don't want in the smaller documents.
Thanks for any help
View 2 Replies
View Related
Oct 29, 2006
I have a combo box that has 3 columns. What I am trying to do is get the third column to be passed as the value to another textbox after the combo box is selected.
combo box sample data: Male/John/NY
the 3rd Column which is state I would like to have it sent to the State Field...
View 2 Replies
View Related
Aug 10, 2005
Hi
I've created a listbox and am using the following code
stWhat1 = "": stCriteria1 = ","
For Each vItm1 In Me!LstArchive.ItemsSelected
stWhat1 = stWhat1 & Me![LstArchive].Column(0, vItm1)
stWhat1 = stWhat1 & stCriteria1
Next vItm1
Me!txtCriteria1 = CStr(Left$(stWhat1, Len(stWhat1) - Len(stCriteria1)))
The problem is that my bound column is a text field. I'm really struggling on where to put my quotations so that I get the following with the In function
In('00638','00639').
Any help or pointing in right direction would be very much appreciated
Carrie
View 3 Replies
View Related
Feb 6, 2015
I have two listboxes. One for Activities and the other for Organizations.
I set the Org listbox to be multi-select so I could run a loop on that listbox to join multiple Orgs to a single Activity. That part works well.
To do so, I am using the bound column (which is the pkey value) from the multi select listbox, and on the single select listbox I'm using the ListboxName.value to gather the pkey for the "1" side of this 1:Many series of inserts.
Now... I want to use one of the other-than-bound-column value from the multi-select listbox, but I don't know how. When setting a value I only know of the use of :
Code:
ListBoxOrganizations.ItemData(varItem)
and I don't know how to do the equivalent of
Code:
ListBoxOrganizations.ItemData(varItem's column(2).value)
yes, I just made that up, but I hope you get the point. Meaning, as the loop cruises the ItemsSelected on the multiselect I'd like to use other than the bound column when setting variables.
I've tried using the column property to then cruise to the proper record in the listbox, e.g. :
[code]
txtCollaborationDesc = "Collaborate " & ListBoxOrganizations.Column(2, varItem) & " with " & listboxActivities.Column(2)
[code]
But this seems to return the column(2) value of the first record loaded into the list box, as if the varItem piece is being ignored. I believe the loop is working properly, as when the inserts are happening correctly with the bound column of the multi-select list is correctly present as an Fkey in the resulting child records.
I just can't get any other column's value for some reason.
MS Access 2010 and this is an accdb.
View 3 Replies
View Related
Jun 14, 2013
I have three tables.
Table 1: Group
Field 1: Group Text field ( Primary key)
Field 2: Group Description Text field
Field 3: Uidgroup( Autonumber)
Table 2: Subgroup Text field
Field 1: Group ( I want to bound this column to Table 1's Group field that is column 1) I have set bound column property to 1 and column count 1 and the Subgroup table is showing group fields as input perfectly no issues in that )
Field 2: Subgroup, Text field( Primary Key )
Field 3: uidsubg( Autonumber)
Table 3: Email
Field 1: Group ( Bound to Table1's Group ; showing values in combo box, setted bound column property to 1 and showing group field perfectly, no issue in that )
Field 2: Subgroup (I want to bound Table2's subgroup field, which is column number 2, so I wrote 2 in bound column property and row source is table subgroup ; Here is some error comes up, values from subgroup field of subgroup table not being shown up in Email Table's subgroup field as combo box. )
Field 3: Email Text field
Field 4: uideml (Autonumber ) primary key
I want to prepare a Data entry form should have all these fields from all the tables. That should work in following way, first user selects Group then User selects Sub Group and write Email and save the record.
What relationship should I set, or shall I change the table structure.
View 1 Replies
View Related
Sep 2, 2013
I'm using Access 2007. I've created a table with two fields. "Novice and Recertification" as in combo box.
I put it on the form. Now the idea is when a user clicks Recertification, it shows up on the report. When the user clicks on Novice, it should be empty on report (Reason why I want to keep novice is so that we have a record of it.)
Now the challenge is I added another column, empty field for Novice and Recertification for Recertification. Thing is if I set the bound column, I select on an empty field on form and it will be empty on report. But I want the user to see Novice on the form and it must not show on the report.
View 3 Replies
View Related
Feb 9, 2015
Access 2010. The first table is called Clients.The Primary Key field for the Clients table is an AutoNumber field called ClientID.The other two relevant fields in this table are ClientFirstName and ClientLastName. The second table is called Contacts.In the Contacts table is a foreign key field, bound to the ClientID field from the Clients table, and also named ClientID.
On the Contacts table, the ClientID field properties are set on the Lookup tab as follows:
Display Control: Combo Box
Row Source Type: Table/Query
Row Source: SELECT clients.ClientID, clients.ClientFirstName, clients.ClientLastName
Bound Column: 1
Further, in the Row Source's Query Builder, ClientFirstName and Client LastName both have Ascending selected as Sort criteria.
Everything works as intended: When entering data into the the Contacts table (actually, the data is entered via a form built from the Contacts table) the data entry person can click the drop-down on the combo box for the ClientID field, scroll through ClientID records, and see unique ID numbers sorted by first and last names. And the actual data for the field is stored properly as the unique ClientID number.
When entering ClientID data into the Contacts table (or form), is it possible to enable autofill based on ClientFirstName and ClientLastName, rather than ClientID? For instance, let's say we have a few clients named Joe Smith. It would be great to just start typing "Joe Smith," and have the field autofill the ClientID number for the first client named Joe Smith. The intention is to make data entry a bit quicker.
View 3 Replies
View Related
Dec 12, 2012
So I have a list box that lists organizations. I recently changed the list box type to extended multi select. On the same form, I have a button that opens a new form where the user can input contacts for each organization. When the list box was not multi select, the expression [forms]![media]!
[List30] made the default value of one of the fields in my contact form the bound column from the selection in the list box. However, now that the list box is multi select, the contact input form does not seem to be able to get the value from the bound column in the list box. When multi select is turned on, is the bound column stored differently.
To even get the contact input button to work, I had to change the code from:
Private Sub Command40_Click()
On Error GoTo Err_Command40_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "Contactsqry"
stLinkCriteria = "[Organization ID]=" & Me.List30
[Code] .....
View 14 Replies
View Related
Aug 8, 2005
On my form, I currently have a combo box that updates text box data with each new selection. However, after these text boxes for FirstName, LastName, etc. are updated, they cannot be edited. Here is the error message that appears in the status bar:
Control can't be edited; it's bound to the expression '[Form]!EmpList.Column(13)'
I'm thinking it might be a result of the data source for the text boxes being a combo box expression.
Any suggestions on how to fix this?
Thanks. :)
View 2 Replies
View Related
Oct 22, 2014
I try to put an expression for the property "bound column" so that my lookup values will be directly dependent on one of attribute's choice
I have got four options for my attribute. Each option will use a slightly different set of lookup values. I save all four sets in another table.
Then in my properties definition I refer directly to this table as lookup base. When I put bound column number equal to an expression so as to choose the right column of lookup values it refuses. It seems that it does notl ike anything other than a numeric value.
If that's a no-go, I am not sure how to achieve what I try to do then?
Essentially I have a table that 4 attributes: QID,itemID,CatType,Catchoice
CatType can have only 4 values. Each value will make Catchoice take on a different set of combo values
The problem I am having is that I am stuck at the Catchoice lookup definition because it is dependent on what kind of CatType the user picks.
View 1 Replies
View Related
Aug 22, 2006
i have a subform on a form with Source Object="Query.myquery", my form is generating a sql string dynamically and assigning this sql string to the RecordSource property which works fine. But now if the user changes the width of the columns in the subform and close the form , a prompt is thrown asking if the "myquery" needs to be saved. I dont want to save the settings of "myquery" but at the same time avoid this modal dialog. If i use DoCmd.SetWarnings=False , i dont see the warning anymore BUT the query gets saved.
I am using "myquery" to just display column names in the subform when the forms loads and also without it i cant directly use RecordSource property in my code.
any suggestions?
View 1 Replies
View Related
May 24, 2005
Hello,
I have a bound combo box on a form. The selections alow a subform to refresh limiting records to the bound combo box. I have been on the web a lot looking for a way to enable multi list selection or all on a combo box. None of these have worked for me. The selection combo box is a simple Yes or No. I would like to add all and have it return both types of records.
This is the sytax I have in the row source property for my combo box.
SELECT [Sales Master].[Accounting Comp Flag] FROM [Sales Master] UNION Select "All" FROM [Sales Master] GROUP BY [Sales Master].[Accounting Comp Flag];
This code allows the combo box to have an all selection but it does not retrieve any records.
If someone can find my mistake that would be great! Thanks!
View 7 Replies
View Related
Jan 24, 2005
Hi,
This one is really confusing me!
I have a text box on a form that is bound to a field in a table that is populated by a combo box coded into the table whose data source is a select query.
Everything looks fine in the table, but when I display the data on the form it is displaying a different field of the source select query than the one displayed on the table.
Why is this, and how can I fix it?
View 1 Replies
View Related
Oct 13, 2006
If I want to be able to save new data to a field from a combo box, what code do I need.
I found the code below which said it was for an unbound combo box. Not sure what to change. I've set it as my event procedure for "On Not In List" and the query runs ok but nothing else seems to happen. Thats while I have nothing in the control source.
If I amend control source to be the field I want, (which is the same as what I already have in the row source, then it won't let me select anything from the combo box drop down at all.
Not sure what to do? Any ideas please??
Private Sub Combolook_NotInList(NewData As String, _
Response As Integer)
Dim ctl As Control
' Return Control object that points to combo box.
Set ctl = Me!Combolook
' Prompt user to verify they wish to add new value.
If MsgBox("Value is not in list. Add it?", _
vbOKCancel) = vbOK Then
' Set Response argument to indicate that data
' is being added.
Response = acDataErrAdded
' Add string in NewData argument to row source.
ctl.RowSource = ctl.RowSource & ";" & NewData
Else
' If user chooses Cancel, suppress error message
' and undo changes.
Response = acDataErrContinue
ctl.Undo
End If
End Sub
View 2 Replies
View Related
Mar 28, 2013
I have tried creating a combo box in a form and as I have gone through the steps, the option to bind each choice that I created in my drop down box for the form is not an option, so how do I make each choice in my drop down box access the report I need?
View 1 Replies
View Related
Jul 19, 2006
My goal is to have two combo boxes the first filters the second. it controls the semester that I am viewing. This works if i don't use continous forms but when i do it requeries every record in the form instead of the current record. I am not an access or vb guy but i have picked a lot up. please help!!!
I have attached a copy of my database.
View 4 Replies
View Related
Oct 3, 2005
This should be a simple one, but right now I just can't get it.
How do I get a Bookmark to pick up on the entry that I chose from in a combo box when there are multiple entries for the same item I want to chose from (ID - primary key is unique, just not the name of the item - 'FullP', and that is what I am using)?
For instance I want to be able to choose the correct record where 'FullP' will have multiple entries, but unique ID's.
Originally I had this bookmark off of a set of cascading combo boxes on a form, but unfortunately when using this set-up the ID (primary key) is not transfered foward, the rest of it works fine and it takes me to the first record for each 'FullP' (just not the correct record when multiples are entered). The record source for the combo is similar to:
“SELECT [LDetails].MDay, [LDetails].Session, [LDetails].DL, [LDetails].FullP “ & _
“FROM [LDetails] WHERE (((([LDetails].MDay)=Forms![DEntries]!EDay) “ & _
“And ([LDetails].Session)=Forms![DEntries]!Session) “ & _
“And ([LDetails].DL)=Forms![DEntries]!DL) “ & _
“ORDER BY [LDetails].FullP, [LDetails].ID;”
AND
Dim Rs As Object
Set Rs = Me.Recordset.Clone
Rs.FindFirst "[FullP] = '" & Me![FullP] & "'"
If Not Rs.EOF Then Me.Bookmark = Rs.Bookmark
Rs.Close
When changing the final combo box and binding it directly to the query, the primary key is transfered foward correctly, but I am still having problems getting it to go to the correct record.
I have added:
Dim Rs As Object
Set Rs = Me.Recordset.Clone
Me.RecordsetClone.FindFirst "[FullP] = '" & Me.FullP.Column(0) & "'"
If Not Rs.EOF Then Me.Bookmark = Rs.Bookmark
Rs.Close
This just takes me to the very first record...
I would really like to keep the cascade combo boxes working.
Any ideas?
View 2 Replies
View Related
Jun 13, 2005
I have a search form (Form A) that as I type in a text box the contents of the listbox refreshes to show only those items that match the text in the text box.
When you double click on any of the items in the listbox it jumps me to a detail form based on the ID field.
On the detail form, there is a subform for any notes which uses a listbox (it lists all the notes entered for that detail item).
The notes subform listbox is only displaying the first note entered in the database....
So if I search for information in case 43, I find case 43. I double click on case 43 and the details for case 43 pop up. I go to the notes subform and the listbox showing all the notes entered is only showing the notes for case number 1.
Any thoughts?
View 6 Replies
View Related
Apr 18, 2006
Hi all,
i need help regarding linking Access to various Word documents.:confused:
the task consists in choosing a particular Country, Year and Month from Combo Boxes and then view the related reports in Word.
for example : United Kingdom, 2006, January
more than one report can be related to a particular country.
is there a way this can be done? (maybe through the use of LookUp for the folder path?!)
any help will be much appreciated.
thanks.
View 1 Replies
View Related
