Hi, All...
Can someone tell me how to change the color (back and fore) within a combo box? I have set both in the properties window and it works fine but, as you scroll through the list within the box, the colors of the active line (back and fore) change to something completely different.
Any assist would be greatly appreciated!
Thanx ;<)
Karen
When I opened my database today, all the tables had turned blue??
Does that signafies anything? How can I reset the table in plain white??
Any help is appreciated!
bboschker
an absolsute access beginner!
Anyone know how to convert a color code from something like:
#E1E1E2
To something that Access will recognize?
Thanks,
Ken
I have a subform that returns a bunch of records. Each of the records returned has a LANE_ID, so in this example, there are 10 records returned, 5 with LANE_ID = 11111and 5 with LANE_ID = 22222. Is it possible to alternate the backgrond color for each of these groupings?
I have found examples of how to change the color of alternate rows, but I can't find anything that would tell me if what I want to do is possible.
How I can do a form whit a list box whit different colors for each record ?
Thank you
Hello everyone,
Does anyone know how to translate the background colors used in Access to RGB?
Thank you.
I built a really good database and now I want to dress it up a bit. Does anyone know how to change the color of a command button ? (access 2003)
Thanks:rolleyes:
reading code behind form and came across:
&HFHEFEF, and &HFFEFFE and the like relating to certain colors: where is this magical "chart/table" of equivalents? Need soon..thanks..teball20 (teddy)
Hi
Is there a way to have alternating colors in a form?
I would like every record to alternate between Grey and White.
Thanks!
I am trying to see if it is possible to store colors in a form or table and then reference them while in VBA. What I am hoping to do is when I write all my code for command buttons to change On Got Focus, instead of writing xxx.backcolor = RGB (255,255,255) i could do something like xxx.backcolor = Forms!HiddenColors!Command That way if i want to ever change the color scheme of the db, I can change it in one place rather than hunt lines of code.
View 6 Replies View RelatedA couple of days ago I was looking to change a form button color in a new database I was working on, I could not. I changed the Back Color to #22B14C but it stayed the same grey color. I could not make the change in that form in that database.
Then I went into a different database that I built and I noticed that the Command Buttons within the form was blue, I changed it to #22B14C and it turned green. What the difference is. I copied the button to the first stated database and in that form and the color stayed to grey even though the Back Color was set at #22B14C. I noticed that the database that the form that I could change the color had Hover and Press color options whereas the first database does not. I copied the form that I could change the button colors to the first database and I could change the colors but they had changed from the second database to the first, I could change the colors but the Hover and Press options were gone.
how I get the first form to change colors and what is the difference between the two databases?
I was creating a access web app for my company and want to create a data for its product. Each product will have multiple colors and different material are used for each color. The number of colorways for a product varies.
We want to be able to select a product and a lookup field will appears for us to choose its colorway.
I have a simple form with 3 check boxes. I want to write a vb code that will change the color of a box if a box is selected.
Table Name: tbl_main
Form Name: frm_color
Field Names: [check_red] [check_blue] [check_yellow]
Box Names: 'box_red' 'box_blue' 'box_yellow' (all currently translucent)
If someone checks the [check_red] field I want the 'box_red' to go from translucent background to a red background, and when unchecked to go back to translucent. Same with the Blue & Yellow boxes.
I have made a simple database and attached it for an example. Thank you all.
Hi everyone,
The problem I'm having is I need to have the background of a field change color depending on what's contained within the field. There's only three possible entries in the field: active, inactive, and a blank entry. I need it to show green if the field contains "active", red if the field is "inactive" or is blank (I also want the blank fields to show inactive, but that's niether here or there right now.)
I've been trying to get it to work with an if then statement, and setoption to change the background. I've had no luck with any of it, though.
Any help would be greatly appreciated. Thanks in advance.
-Walter
Is there any way to change the color of a field based on the value of a field.
I know how to do this for a single form but I need to do it for a Continuous Form
(each line may be a different value and have a different color.)
Is there some event that happens before each line displays???
Thanks
I have one color scheme I want to use all through the database I am developing. The next examples have just one color defined, to make it simpler (a dark blue, that I would call B1)
Code:
private sub setlabel()
Dim B1
B1 = RGB (0,52,105)
me.label1.forecolor = B1
end sub
... however this means I have to repeat the color definition every sub, so I thought would be neater to define a function to set my color codes (I have 20 colors).
Code:
Function SetColor()
Dim B1
B1 = RGB (0,52,105)
End function
My objective, is when I'm working in forms, Iwould (ideally) call this function "setcolor" and just write my code for the blue. I tried the examples below:
Code:
Private sub setlabel()
SetColor()
me.label1.forecolor = B1
end sub
[code]...
Again, this is probably some definition of arguments or dimensions that I am not aware oh. How to predefine the colors in a function to give them a "short" code which I can call in any sub in the database?
1. Can we have the cells within access table change color when their input changes as in excel? For Ex:
If the input for a cell inside Column "Status" says "Pending" then the cell color is orange.If it says "Completed" then color is green?
Is this possible on Access?
2. Also is it possible to change the color of Column headings?
I tried changing the color but found that the entire table changed colors with alternate rows.
I have a report that contains game and its rating, the rating goes from -10 to +10, I would like to highlight the games that have a rating 1 or more with green color, rating 0 with yellow, and -1...-10 with red color, allso I would like to make a link on the game, so that when I click on it, it will open a form where that game is registered, for example it I want to change rating.
View 2 Replies View RelatedCan we set different colors on specific rows in a continuous form?
Suppose the following data entry form (continuous) is to fill in spouse name, while name and marital status is already prepared in a different table. If the marital status is Married, then the spouse name textbox's background color will be Yellow. The standard background color is white.
Name Marital Status Spouse Name
-------------------------------------
xxxx Married (Yellow)
xxxx Unknown (White)
xxxx Not married (White)
xxxx Married (Yellow)
I have an option group with 3 options. The labels are black. I would like to change the label to red for the given option that was choosen.
Option group name: OptionCarrier
Options: Option1, Option2 and Option3
Labels:Land, Sea and Air
Thanks for the help - John
Dear All:
I have a report in Access 2000 showing names, ID numbers, Address and dates.
I wish to have alternate colors instead of the default white backgroud Access has.
Any ideas on how to start?
Many thanks,
Dion
I have to create a control on a form that will be able to change to one of ten colors, some of them are subtle shades. I will be doing this from vba on the control. I know how to do all of this except defining the colors.
I keep seeing the 3 part RGB(xx, xx, xx) etc. but I can't find the values for it that will give me the exact colors that I need!
I also saw a possibility of using a the hex equivalent for the color but I couldn't make that work?
I want the write a code that can be when run shows the Color Selection Window. For example I want the user to select the color of one object in the form by clicking on a button. Then I can store the selected color into variable.
http://cops.msc.tamu.edu/graphics/cset.jpg
Please Help me as soon as possible.
HIGLY APPRECIATIVE,
I am trying to see if it is possible to store colors in a form or table and then reference them while in VBA. What I am hoping to do is when I write all my code for command buttons to change On Got Focus, instead of writing xxx.backcolor = RGB (255,255,255) i could do something like xxx.backcolor = Forms!HiddenColors!Command That way if i want to ever change the color scheme of the db, I can change it in one place rather than hunt lines of code.
I have played around but with no success. Technewonline is a website that specializes in introducing the latest technologies such as Best Tablet Android Have Price Under $200 and Best tablet of Apple in 2014 and The Best Midrange Smart Phone In 2014 and Top Best Ultrabook Of 2014 and The Best Phones 4G Valued At Under 300 USD is also a website for sharing your tips about computers, mobile phones and tablets, products are available from leading supermarkets will surely satisfy you.
Access 2007: I have a continuous form which, when it opens, uses code to display alternating colors... I need to set a default 'alternate' colour, and I want to find the code to use for Light Grey - on the design of a form, the color to use on a control would be #903C39 but when I try to set that as my default colour in the code it doesn't like it! I can use vbRed, vbBlue, vbYellow, etc, and that works perfectly but I can't find a vbLightGrey
View 6 Replies View RelatedQuestion 1:
I am attempting to make a macro to pull information based on a clicked button to provide information to another form. While my example below will be rudimentary, I am attempting to create so that it can be applied to 450 buttons, hence the need for it to be a macro and not simply code per button.
For example if I have 3 buttons, captioned: red, green and blue. If I click on the blue button, it will open another form with a text-box that will say 'blue'. Likewise, if I click the red button the text-box will be changed to 'red'.
In the code below the section that I need to change is: Command1.Caption. Using this data I can pull from the one button to create the value, but I need it to be based on an OnClick or something in order to pull the value from the right button.
Example:
Function Macro1()
On Error GoTo Macro1_Err
DoCmd.OpenForm "Form2", acNormal, "", "", , acNormal
Forms!Form2!Text0.Text = Forms!Form1!Label0.Caption
DoCmd.GoToControl "[Text2]"
Forms!Form2!Text2.Text = Forms!Form1!Command1.Caption
[code]...
Question 2:
I am trying to use a query to change button colour on the basis of values stored in a table.What I want to do is change the button background after comparing the button name to the same variable in a table, and determining another variable.
IE:
Button1, Button2. In table: Button1, Val = Y, and Button 2, Val = Z
Pseudo Code:
Array: From Button1 to Button2
Query for Button1 against table
If Val = Y, Button1.background = red
Else if Val = Z, Button1.background = blue
Else Button1.background = black
End if