Have just created an access 2000 database which when a user logs on to the network as herself and tries to lookup any combo boxes or click a button to run a query from a form it shows or does nothing, yet when I log on I can.
Our IT Services have looked at folder/share permissions which appear to be OK and I've not set any permissions/workgroups in the database.
Can anyone shed any light as to why this is happening please?
I have a form with a combo box (unbound) that gets its values from a table. I also have another combo box which is supposed to get its values from a query:
SELECT Vehicle.Registration, Vehicle.Make FROM Vehicle WHERE (((Vehicle.Customer)=Forms![New Job]!Customer));
I have made the first combo box refresh/requery the second one onChange, but I get no options in the combo box.
I am pretty sure that the first combo box is Forms![New Job]!Customer. and there are matching values in the Vehicle.Customer field.
The database can be downloaded from: http://www.tapestriesdirect.com/Garage.mdb (996KB) or if you can unzip (who can't?!?) http://www.tapestriesdirect.com/Garage.zip (86.1KB)
Field "City" is connected to a combo box and field "country" to a textbox on the form.
I would like the user to select a city from the combo box. When this is done the textbox linked to the country field should automatically update to show the correct country. This should update without user intervention.
I would find it better to have the text box look up a value list rather than use a table for its source. the form is being used as data entry. The combobox linked to field "city" is also a value list.
I would like all of the text in my database to appear in upper case. I used the > symbol in the format of all controls and in my tables also. However, on my form's lookup combos it doesn't work. When I click the dropdown it shows all selections in upper case, but after I select it turns into lower case again.
I then tried using Ucase and strConv but those don't seem to work with my combos either.
I have searched and these are all the suggestions I could find on how to do this, does anyone know another or possibly what I am doing wrong?
I have two tables A and B. There is a 1 to many relationship between A and B. Table A's data is controlled by FormA, Table B's data is controlled by FormB which is a subform on FormA. I already have a combo box for navigation on FormA, however I would also like to be able to have a combo box on FormB (FormA's subform) for navigation, so that when I choose an record from the subforms (FormB) combo box, FormA then jumps to the 1 record from FormA that contains the related record choosen in the SubFormB's combo box (along with the subforms choosen record on the subform) .
Kindalike the combo box on FormA, except it's a 'reverse lookup' if that makes sense. Is this at all possible, does this even make sense? :confused:
I have a small database with 3 tables. tblBilltoCustomer Fields - Key - BillCustID , companyname, address1, address2, city, state
tblOrders
tblCustomers
I have a form that has tblCustomers as the main form then tblOrders as a sub form.
I want to place a combo box on the form that will lookup a company name from the tblBilltoCustomer table then brin in the address1, address2, city,state , into the form for that record. But then I need that same info to print on a rpt.
I can get the lookup to work using =cboCompanyName.Column() but the addresses , city and state will not show on report Is there any good samples of lookup fields
TblCat Contains fields CatID (index) & CatText (Text) TblType Contains field TypeID (index) , CatID (index) , and TypeText (Text) Relationship of tbleCat.CatID (one) to tblType.CatID (many)
Forms!Input!cboCat bound to Tables!Inventory!Category Forms!Input!cboType bound to Tables!Inventory!Type
Intent: Choice from cboCat to provide from list for entry into Inventory.Catagory plus filter list choices for cboType for entry into Inventory.Type.
cboCat : RowSource : SELECT [tblCat].[CatText], [tblCat].[CatID] FROM tblCat; Event: Private Sub cboCat_AfterUpdate() Dim xxx As String
xxx = "SELECT [tblType].[TypeID], [tblType].[CatID], [tblType].[TypeText] " & _ "FROM tblType " & _ "WHERE [CatID] = " & Me.cboCat.Value Me.cboType.RowSource = xxx Me.cboType.Requery End Sub cboType: No special RowSource or events
cboCat works fine but cboType has a popup box that asks for the Parameter value for the choice made in cboCat. ( Me.cboCat.Value ???) Where did I go wrong ??
What I want to be able to do is in a sub form and a combo box named ACCOUNT that looks at the active CLIENT_ID and pulls into to combo box JUST the ACCOUNTS set to that CLIENT_ID example if the CLIENT_ID is 900001 is just brings in ACCOUNTS 4000 & 4001.
I can get the whole list to come in to the combo box but not a filtered list.
I have a DB that that is growing slowly. To keep it simple I have 2 tables and one form. One of the tables is a “ASSET_lookup” table. The other table (ASSETS) is the real meat and potatoes. I have a form for the assets table that will populate specific fields that are looked up based on a single combo box linked to a query from the assets_lookup table. Everything worked fine until I needed to add some additional items to the asset_lookup table.
The new “records” I added to the lookup table will not show up in the combo box after it updates (a selection is made). I did some experimenting and if I recreate after adding the new records to look up table, the combo box will show the value, but I am curious what I am missing.
I have a main form which has a button to View one of the Reports related to my primary table.The View Report works fine.On close of the Report the program returns to the Main form, and it returns to the record of the Report that was viewed with all of the data for that record showing in all of the Fields, except the Combo Box that I use to look up a record, it is blank.Other than that, the Look Up Combo Box works fine.How do I get the Look Up Combo Box to show the information for that look up field.In the On Close item for the Report I have the following code to get back to the record I want to return to.
Private Sub Report_Close() DoCmd.OpenForm "ENLARGED PROP INFO", , , "[Name]='" & Me![Name] & "'" End Sub
I have a table with some combo selections with row source No;Yes, bound column 1, column count 1, and default value "No", limit to list set to yes, required = yes, allow zero length = no.
When I create a new record though, all of the combos show 0, and I have to select No or Yes manually. The requirement is that No is the default value..
I'm using a lookup table to populated a combo box on my form. I use a provided list of input strings (hundreds) in my combo box and the list is provided in all caps. How can I convert these provided words (strings) to first cap from either the quarry level or form level.
I have two combo boxes in a subform that use lookup queries. I can get the combo boxes to work correctly out of sub form in a regular form but can not get the combo boxes to work in the sub form. I have narrowed the issue to the logic in the queries in the secondary and tertiary combo box queries. Here is the part of the secondary query. I think I have to add the primary form name to this part to correct my issues. How would I do that?
primary form = Lookup_fm sub form = master_tbl_sub_fm
I'm not a programmer, I am infact a 17 year old College Student from the United Kingdom - Studying ICT!
For my major project I have to design, build and test a camera loans system for my photography department. Except, I am having problems with Combo box lookups. It's been over 6 months since I learnt this, and it's all a blank. Something as simple as this is simply not working...
e.g. in the Studentloans table, I wish to enter the Student ID number from the student ID card inside the combo box, and hit enter so that it brings up the relevant specific loans of that student. I enter the id, hit enter and the student name, class etc does not change. Why? The same goes for my Camera Maintenance Table, Camera + Maintenance tables are combined to a CAMERAMAINTENANCE TABLE - Therefore I wish to enter the Camera ID number so that if i hit enter, it brings up the relevant service histories of that specific camera...
The relationships are all ok, the fields for Student ID are lookup, etc.
I don't understand. It's driving me insane. I need help with this, I'm struggling so much.
I have a sales form that contains a combo box lookup to tblCUSTOMERS. It allows me to select a previous customer if that person is already entered into the system. If the person is NOT in the system, a form pops up to add the customer into the table.
What I need to know is, if the person IS already in the table BUT their address etc. has changed, what is the best way to get to that record to edit it? I'm THINKING a button with a command to go to that customer's profile.
What is the code to open a form to the customer selected in the drop down.
tbl_Retainer tbl_Retainer_Grant_Funding tbl_Retainer has the field, Retainer_ID
And tbl_Retainer_Grant_Funding has the fields, Retainer_ID (a lookup field from tbl_Retainer) Agreement_Num (a lookup field from tbl_Grant)
I have a form based off of a query(not sure if that matters), that uses that tables, tbl_Assignment and tbl_Assignment_Grant_Funding. These tables have the above fields as lookup fields.
So...what happens is, if an Assignment has a Retainer, I want the Agreement_Num box to show only the Agreement_Num's associated with that Retainer, otherwise just show all the Agreement Num's.
In my form, I have Retainer_ID with the row source, SELECT tbl_RETAINER.Retainer_ID FROM tbl_RETAINER;
And Agreement_Num with the row source, SELECT [tbl_GRANT].Grant_ID, [tbl_GRANT].Agreement_Num FROM tbl_GRANT ORDER BY [Agreement_Num];
In my AfterUpdate event for Retainer_ID I have,
Private Sub Retainer_ID_AfterUpdate() Dim strSql As String strSql = "SELECT [Retainer_ID]," & _ "[Agreement_Num]," & _ "FROM tbl_RETAINER_GRANT_FUNDING" & _ "WHERE [Retainer_ID] = " & Me.Retainer_ID.Value
Me.Agreement_Num.RowSource = strSql Me.Agreement_Num.Requery End Sub
When I am in my form and choose a Retainer ID, the Agreement_Num box goes blank, and there are no choices to choose from. I am wondering if this is because the Agreement_Num's are sourced from tbl_Grant and not from tbl_Retainer_Grant_Funding.
I have an unbound combo box that looks up a list of numbers through a query but on the drop down list it does not go all the way down to the bottom of the numbers. For instance the combo box will only go down to the number 27453 but I know there are more numbers than that in the table. I can even type in a number and get the info but it still doesn't show up in the list...
I want to create a text box within a form that automatically populates a contact number based on a selection from a combo box, also in the same form.
For example, I have a Bidders Table (tblTenders), this form includes information regarding the Tendor like the company name and a main contact within that company and a phone number for that contact.
I've created a separate table for all the contacts called tblContacts. This table holds all the contact information for each contact. I have a simple form called frmTenders that asks the user to input the Customer (which is the company who are bidding) and the Main Contact, which is a combo box to select the main contact from tblContacts. Below that combo box is a text box called 'Contact Number' - I want this box to display the contact number for the main contact automatically when a main contact is selected from the combo box.
The contact number text box isn't storing that information in any tables etc. It's just for viewing purposes when we need to make a call to that specific tender.
I'm wrestling with the issues; in other threads, it became apparent that because I could not know ahead of time what I will need to know about a given entity, I will use a table to enumerate attributes that is applicable for a given entity.
However, the stumper is that what if an attribute should conform to a set list of values? Since they are dynamic, I would have problem predicting what I will need to be able to lookup, and am even don't know whether I will need a one-many lookup or many-many lookup.
I thought that generic lookup table with a table listing "classes" of lookup would allow me to have one big generic lookup table while using "classes" to act like virtual tables so I can then set the query to appropriate "class" to return just right set of values.
But as I thought about it, I ran into some issues which is pulling me toward the crazy idea that I should have freestanding tables, and use a field in tblAttribute to give me the table's name so I'd know which free-standing table it points to, and have the necessary key to lookup the values within that table.
Even though my gut instincts tell me that I shouldn't be going against the conventions of database design (who the frick goes around creating free-standing lookups?!?), I'm simply not sure how I can use a generic lookup table to hold all information.
For example, suppose I was given a list of values that has its own categories. Since the former design allows only for two level (lookup and lookupclass), where am I to insert that extra level?
Furthermore, I found myself needing a set of virtual keys to reference a certain "class" of lookups for report purposes. That means I need an extra field in my lookup table than I originally anticipates. What if I find myself needing one more field that just won't fit the generic lookup table?
So does anyone have suggestions on how we would create a placeholder for a lookup table that will be made just in time?
I have three large source tables imported into my database. I have created queries to retrieve relevant values from fields in each source table which feeds into my form. Each field on my form that is connected to the relevant query is a lookup field. For example, one field called "Supplier_Name" another called "Supplier_Code" and a third called "Route_Number".
Needless to say each of my lookup fields are very long. I am trying to filter my search based upon the selection from the previous Lookup field. How I can filter a lookup field's value based upon the previous lookup field selection? Each Supplier has a code and assign route(s) and I have already established these relationships.
I'm changong computers and at prestne (for a few days) I am using a borrowed computer. When I edit any of my db's I now get a message telling me that I haven't got permission do carry out what I am doing & the permissions will be erased (can't remember exact message cause I'm on another computer). The edits I have made work ok but I really don't know anything about permissions:confused: It's something I have not been bothered with because this is the first time I've changed computers with all my db's. I use acess 2003. The computer I'm seeing the mesages on is using the version of jet that came with it, my old one had an updated version of Jet (probably not the latest though). Any suggestions?
Hi - I wonder if anyone can help. In my haste today I ran the security wizard on an Access DB and I've locked myself out. Using Win XP home and Access 2003. Now when I try to open the DN it tells me I don't have the necessary permissions. I've hunted through the forum and there seems to be tons of postings on this, and I have tried creating a new .mdw file etc, but just can't get into it. Can anyone help me please in giving the exact steps I need to take to unsecure the DB again, as there is dozens of manhours work in it, and I desparately need to get it opened again. Thanks.
I have secured a DB and everything is tickety boo except for the fact that I want to be able to administer permissions from the FE (MDE) and the modify permissions button that i have put on a custom toolbar is greyed out when I log in?
I have full admin rights on my group and own all the objects and Access lets me assign all the permissions if I enable the shift bypass and enter the development MDB that way but that's quite a bit of hassle if I want to just change a permission or two.
Can anyone tell me why it won't let me change them?
