Hi
I'm totally stuck creating a form because I don't know how to set up my combo boxes. The database is about tiles and the forms for data entry to create an invoice with one combo box to hold the tile range eg: White, blue, etc. I want the second combo box to hold the details on the tile names of the range chosen in the first combo box. eg: if 'white' is selcted in the tile range combo box, then only the names of the white tiles should appear to be selected from in the 'tile name' combo box.I then have a separate field to display the price of the tile depending on the range chosen.
This is for some exam coursework and the guidelines specify that I'm not allowed to use VB or other code. Could someone please tell me how exactly I can sort this out so that the three are linked (2 combo boxes and the price field)?(queries?adjusting form properties?) All the details on tiles are stored in one table. Any guidance is greatly appreciated.Thank you so much.
-Camryn
I have a main form with a subform. On my main form, I have a combo box set to "find a record on my subform, based on what I select in the combo box." This works great! At the same time, I want to use this main form combo box to synchronize with a combo box in the subform to display a value based upon the value selected in the main form's combo box. I have tried several things and searched Access newsgroups without success. I am using MS Access 2002, producing an Access 2000 database. Has anyone got any ideas? I could really use some help. Thank-You.
We are running Access 2002 on Win2k. The database has been split into front and back ends, and synchronization occurs directly over LAN with 7 replicas. During synchronization I received a failure message "The search key was not found in any record. (Error 3709)."
I have tried several things found on Microsoft KB and other forums-- Compact and repair, removing indexes from memo fields, updated Jet and Microsoft Data Access Components-- but nothing has worked. Does anyone have any ideas on this one? Thanks, James
I have an Access 2002 database (about 120mb) which was replicated using Replication Manager (version unknown). It is set up to use Internet Synchronization. We use it on state government LAN and WAN as well as the Internet. It works well in most cases, but on a few computers we get the error "Http address not found" when synchronization is attempted. The address is indeed visible to those computers. We have determined that reloading Windows (XP Pro) will usually solve the problem at least for a while but when GIS mapping software is installed it reappears. More worrisome is that some brand new laptops with factory-installed Windows are showing the same problem, which means it could get worse as we upgrade equipment.
Hello. i'm working with 10 replicas and a design master, but when i tried to add new tables and forms i get the message (Error 3492) " The synchronization failed because a design change could not be applied to one of the replicas" and after that, i cant synchronize anymore!!! i don't understand what could be the problem. thanks if anyone can help.
Trying to sync between a back end database and one of the replicas we use. Getting the error "The search key was not found in any record" Error 3709 while peroforming ISAM Seek.
Does anyone know how to find the offending record that is causing the problem? It's not related to an indexed memo field either. The only field that is indexed is the AutoNumber Primary Key field.
The only other option I see is to bring up both tables, manually input the differences, and create a new replica.
I have created a form with sub-form and I would you tell me how I should do in order to screen data in sub-form transferred from main form. It looks like:
The subform, which is in datasheet view, contains two dropdown boxes, Country and District (1-n). I want the district dropdown to only display records based on what's selected in the country dropdown. There will only ever be any content in District if one country is selected (let's say country 'A').
I've used the code below (one of many attempts!) to try to achieve this, but it doesn't seem to have the effect I want. It seems that if I select country 'A' from the country dropdown, the District rowsource is as expected for that particular record. However, the rowsource for every other District in the list of records in the subform also now has the same rowsource even where the country <> A.Similarly, if I select <>A from Country, the rowsource fro every district is now empty, even if the country selected in another row is A.
I have been using replication successfully for years. Recently the PC where my Design Master resided crashed taking the hard drive with it. No problems I thought, I used a replica to recover the design master and placed it on the new hard drive (the OS and Access was upgraded from 2000 to XP, however the Access 2000 file format was retained – there are still a couple of laptops with only W2000 software). I understand that moving the path of replicas or design masters is no no, so I proceeded to start from scratch and create a complete new batch of replicas based from the new design master.
Everything was going to plan UNTIL a replica was routinely synchronized with the design master. The design master reverted back to a replica. I recovered the design master again, everything looking fine until again a synchronization causes the design master revert to replica.
Next plan of attack to hopefully fix a potential corruption problem: create a new blank database, import all (non-system) tables, compact and repair, and create a new replica from scratch. From the design master, I created the complementing replicas and sure enough the Design Master again reverted to a Replica after a routine synchronization.
I repeated this “start from scratch” procedure, and the same results prevailed. I am at a loss especially since I verified that the hidden system MSysReplicas table had only two entries after the Design Master and Replica were first created.
I would greatly appreciate any ideas of where to go next with this problem.
I have recently created a database meant for managing inventory. I have started writing queries and building forms, and a lot of it is running smoothly, but I am having a few snags.
To give a brief background, I am currently designing a form in which a user will fill out when an incoming part comes into our company. The form NEEDS to ask the user for at least the PartNumber and the PONumber, but the way I have my relationships set up, I am not exactly sure how to design the forms (not the physical layout, but where the data goes). So when I have an incoming part, will I use the PartPOID to figure out which part number and PO number it is? I am not exactly sure how to make a form for the user that is not confusing.
Attached is a picture of my relationships and my database.
I wish to work in Access 2010 with a subset of my Outlook 2010 contacts (all desktop- no network barriers), so I am exploring the Desktop Contacts DB found in Microsoft's templates. It passes contact data back and forth using the standard macros, but I wish to add more fields from Outlook. It seems I need to find the code associated with the macro. I believe I can solve the problem using a Linked table, but am wondering if there is another solution?
Calendar synchronization is another issue. Linking gets me to the Archive Calendars, but not the Current one in Outlook which is what I want.
I have several comboboxes (6) on my form.How to populate these comboboxes with values depending on selected value in previous combobox.
Example.Lets say that you select value "Audi" in combobox 1, then available values in combobox 2 should be "A4","A6","TT" etc. and if you selected "BMW" in combobox 1, then available values in combobox 2 should be "3-series", "5-series" etc...
I have a form that currently uses a "catch all" table for listing available equipment to choose from for an equipment field. I call it tblEquipment. What I want to do is to make it so when I type a name in (1 of 35) in one field of the current record, the record source for the equipment field immediately looks at a different table that has equipment available only for that name. To do this I plan on making 35 different tables with limited data originally found in tblEquipment. I would call these tblEquipment1, tblEquipment2, etc. I do not use a sub form, nor do I want to.
So my questions are:
1) can this be done 2)If it can be done, how can I do it?
I have two combo boxes on the same form bound to a table. I want the contents of the next combo box to change based on the previous combo selection e.g
cboContinent cboCountry Africa Zambia Africa Congo Africa South africa Europe England Europe Holland
If I choose Africa in cboContinent, I want to see only Zambia, South Africa and Congo under cboCountry and if I choose Europe I want to see only England and Holland
I have a Suppliers database which contains a form that will allow me to place orders with Suppliers.The Main form has a combo box that allows me to select the supplier. The combo box is called SupplierID with the following:
Row source: SELECT Suppliers.SupplierID, Suppliers.CompanyName FROM Suppliers ORDER BY Suppliers.CompanyName;
The subform is called Stock Subform witha combo box called ProductID with the following:
Row source: SELECT DISTINCT Products.ProductID, Products.ProductName, Suppliers.CompanyName, Products.Discontinued FROM Suppliers INNER JOIN Products ON Suppliers.SupplierID=Products.SupplierID WHERE (((Products.Discontinued)=0)) ORDER BY Products.ProductName; Event Procedure - AfterUpdate: Private Sub ProductID_AfterUpdate() On Error GoTo Err_ProductID_AfterUpdate Dim strFilter As String ' Evaluate filter before it's passed to DLookup function. strFilter = "ProductID = " & Me!ProductID
[code]..
The Link fields are done on the Purchase Order ID (PONoID).What I want to achieve is to select the supplier from the combo box (SupplierID) on the main form and then the combo box (ProductID) on the subform to filter to only show products directly supplied by the Supplier selected on the Main Form.
I'm looking for a way to have a text box auto fill based on the selection of a combo box on the same form. I cannot use the method i find all over the internet of using multiple columns in the combo box and basing the text box on that because the combo box already has multiple columns being used to determine its own possibilities and other combo box possibilities.
I would really just like the text box to work like this, but im still kinda inexperienced in VBA...
If combo box is "F004-001", then text box is "237" If combo box is "F004-003", then text box is "280"
I know how to add in an "after update" thing, but i do not know how to do If/then statements.
I'm have quite a difficult time getting a form in Access 2010 to perform the way I would like it to. I have multiple tables that I've created, and a query that contains the data from the various tables. I then ran the form wizard to select the data from the query that I wanted to populate in my form and I've added 2 combo boxes.
What I want to do: 1. I want users to be able to select a category in combo box #1 (example: "Bag") 2. I want users to be able to select a detail in combo box #2 based on the category they selected in combo box #1 (example: Combo box #1, "bag" would populate the following selections for combo box #2: "sandwich" and "tool") 3. I want users to then receive a list of suppliers that provide the product they have selected, either "Bag: Sandwich" or "Bag: Tool"
I have combo box #1 populating a list of categories already. However, I am not able to get combo box #2 to provide choices based on the selection chosen for combo box #1.
I want to create a Multiple Items form presenting Orders table with two Combo Boxes:
1. A combo box to select Order_Category_ID. 2. A combo box to select Order_Type. When 1 (Minor) is chosen in the first combo box it should show Book and Pencil, when 2 (Major) is chosen it should show Car and House.
Examples in the Internet show how to do it on a 'single row' forms using the RowSource property. I tried to use a query like:
SELECT Order_Type FROM Order_Type INNER JOIN Orders ON Order_Type.Order_Category_ID = Orders.Order_Category_ID WHERE Order_Category_ID = [comboBoxOrderCategoryID]
But it sets same values for all records in the Multiple Items form and it should return different values in each rows based on value in the first combo box (Order_Category_ID).
I'm an extreme newbie, I do not know access very well, nor do I know VBA, I do know PHP.
I have a for in access that has 2 user input fields, one for prodid one for shipid. I have a combo box that upon entering data into the previous 2 fields, it does a query against an MsSQL database looking for a record that has both. In any case there will only be 2 outcomes, either 1 record, or null. I would like to have that same combo box automatically use the result as it's value so that users don't have to check the box, because they won't, and so that the rest of my VBA will be able to function properly.
I would like to set up rules/constraints such that the value selected in combo box A determines the available values in combo box B. For example, "Combo box A" is bound to the [PartnerType] field and "Combo box B" is bound to the [PartnerRole] field. Let's say that the two choices in Combo Box A are "LLC", "LP", and "Corporation". There are 5 possible choices in Combo Box B: "X", "Y", "Z", "Q", and "U". If a user selects "LP" in Combo Box A, I would like Combo Box B to only show choices "X" and "Y". And if a user selects "LLC", only choices "Y", "Z", "Q", and "U".
Similarly, I would like to set this up so that Combo Box B is not initially visible--it becomes visible when a user selects "LLC" or "LP". If a user selected "Corporation", Combo Box B would remain hidden.
I have seen a few articles here and there on using a combo box to filter records in a sub-form and to filter records in another combo box, but I am not getting anywhere. I hope someone can belp
Exercise 1
For this exercise, I have the following tables:
tblClients containing client names tblProjects containing some project details
I want to set up a simple form, so that the user can select a client name from a combo box on the main form which filters the project detail records in the Projects sub-form. Once the user enters project details, I want this info as well as the selected ClientID to be fed back to tblProjects.
Exercise 2
I have the following tables:
tblProjects as above tblWorkstream containiig names of workstreams and some other details.
Every project has one or more workstreams
I have a form where users will enter hours worked on each workstream. They will first select Project from a combo box on the main form. This should then filter records to be displayed in the Workstream Combo box, before they can then enter hours.
Please let me know if you need me to explain any part of this better.
Thanks in advance.
ps. I am a novice, so I'm hoping to do the above using default MS stuff, not with complex programming!!!
I'm an Access newbie and I'm having trouble restricting a combo box on a subform based on the selection of the combo box on the form.The combo box (Combo1) on the main form (FrmOrganisation) gives a list of companies, I want the combo box (Combo2) in the subform (SbFrmEmployees) to list people only from that company. I then have a subform within that subform that displays information about the employee.
I have had a look through the forum and I am not sure if this can be done. I have a table. i.e. with columns Decsription 1, Cost 1, Description 2, Cost 2 Description 3, Cost 3 description 4, cost 4 etc.
I am looking to try and gave a combo box show this information as follows. I.e
