ComboBox Values And Showing ALL Issues...
Feb 13, 2008
Hello,
i have done a search.. and found a post which half answered my problems..
I have a Table with some columns which contain Yes/No check boxes as field types.
I have a form with two unbound combo's with their rowsource property set to a Value List "0";"-1"
When I run my form I get 0 and -1 as options in the combos..how would i get Yes or No as options. (i have changed the Value List to "Yes";"No" but the query gives me an error. I also tried to set the rowsource to SELECT Distinct Car from Pupils; and this 'does' work but i dont get the ALL column. I have also tried SELECT Car from Pupils UNION SELECT "" from Pupils;
This gives me the ALL at the top..but 0 and -1 as values to choose from..
I understand that Access stores values in checkboxes as 0 and -1
so to recap..
I want to click on the dropdown combo and have a blank 1st entry.. then entry 2 and 3 will be Yes and No ..not 0 and -1
attached my db file..
kind regards
omar
View Replies
ADVERTISEMENT
Jul 16, 2013
I have a combobox with the following specs.
Row Source Type = Value List
RowSource = 1;test1;2;test2;3;test3;4;test4;5;test5;6;test6;7; test7;8;test8;9;test9;10;test10;11;test11;12;test1 2
ColumnCount = 2
ColumnWidths = "0cm;8cm"
Bound Column = 1
For some reason unknown to me, although the combobox does drop down when entered, the values are not visible until selected, then the selected item is visible in the combobox, but still isn't visible in the drop-down list.
EDIT:
I'm using Access 2010
View 9 Replies
View Related
May 9, 2013
I have a form for data entry that have multiple comboboxes. I am trying to get one combobox to base its "list" on an entry from a previous combobox. The first combobox is based on a QuantityType table and has four options.
The next combobox is based on a ProductDesign table and will have close to fifty options. I want to limit the ProductDesign combobox based on the QuantityType selection which will give the QuantityTypeID. This will refer to the QuantityTypeID linked to the ProductDesign table.I have created a query that looks like this:
SELECT Product_Design.Product
FROM Product_Design, Quantity_Type
WHERE Product_Design.QuantityTypeID = Quantity_Type.QuantityTypeID
AND Quantity_Type.QuantityType = [Forms]![Product]![Qty_Type];
This Query works and if I simply run the query I get the needed information from it.What I would like to do with this query is to populate the ProductDesign combobox with this data.I have tried putting the query in the RowSource field but I get an empty combobox without the data. The strange this is that the combobox must be getting something from the query because the length of the combo box varies based on my QuantityType selection. I.E. if I select "Single" in the QuantityType, the ProductDesign dropdown shows three empty places for data whereas if I select "Multiple" in the QuantityType I see that there is ten empty places for data.getting the combo box to actually show each option?
View 1 Replies
View Related
Apr 6, 2014
I made a form that has a combobox that references the combo box above it, and it all worked fine, then I moved it into a navigation form and it stopped working. This was because the source was still using the static reference of the standalone form, not the subform it is now. So I've changed the row source a number of times, but each time, when run, access fails to find it, instead asking for a parameter to be input. The lines
The Nav form is Navigation_Form, the subform is MCR_Log, the combo box is Affected_Subservices and the referenced combobox is Affected_Services.
Code:
Forms!Navigation_Form!MCR_Log.Form!Affected_Services
or
Code:
Me!Affected_Services
does not work, even if I change the bangs and dots around. I can't attach the file to this forum, so here is a dropbox link to have a play around.
Bonus Question, I want the first combobox to accept multiple arguments, and the second to display all the subservices under each service, would the record source for that look something like
Code:
SELECT Subservices.Subservice FROM Subservices WHERE Subservices.Parent = Me!*Affected_Services*;
?
View 6 Replies
View Related
Jan 2, 2014
I have a report that is returning percentages based upon other calculated fields. Some of the percentage fields are showing #Num on the report. I've found this is due to one of the calculated values being zero.
3 Fields used:
Field: Qty
Total: Sum
Field: InitQty
Total: Sum
Field: OrderQty: Sum([Qty]-[InitQty])
Total: Expression
I need two more fields to return percentages based off of those 3 fields. This is what I started out with:
Field: InStock: [SumOfInitQty]/[SumOfQty]
Total: Expression
Field: Ordered: [OrderQty]/[SumOfQty]
Total: Expression
This works great until the query returns one that has sum of qty equal to zero. So this is what I've tried:
Field: InStock: IIf(Nz([SumOfInitQty],0),0,[SumOfInitQty]/[SumOfQty])
Total: Expression
Seems like it should work but its still showing #Num when I run the query.
View 2 Replies
View Related
Mar 20, 2007
I have a chart that shows the amount of complaints every month in the last year of a selected costumer. The goal is to see if the amount of complaints from this costumer is decreasing or increasing.
The problem is that some smaller costumers have months without complaints (in real life that isn’t that bad). But my graph only displays a dot for the months were the amount of complaints is not null. This makes that the graph line doesn’t show the complete picture.
I know that I should be able to solve this with an ISNULL expression. I have tried the following SQL code as Row Source of the graph:
SELECT (Format([Complaintdate],"MMM 'YY")), ISNULL(Count([Complaintnumber])),0 AS [CountOfComplaintnumber] FROM [Complaints] WHERE [Complaintdate] > (Date() -365) AND [Costumername] = Forms!Report_complaintscostumer!Combocustumername GROUP BY (Year([Complaintdate])*12 + Month([Complaintdate])-1),(Format([Complaintdate],"MMM 'YY"));
The result of this is that all the months with complaints now get a 0 value and still the months without complaints aren’t shown.
What am I doing wrong? Could someone help me solve this problem? Any help is greatly appreciated!
View 1 Replies
View Related
May 3, 2008
Hello all, I am trying to dispay results in a query which is based upon time.
e.g.
Sample data - class and class start time
Class one - 7pm
Class two - 7pm
Class three - 7pm
Class Four - 8pm
Class Five - 8pm
Class Six - 9pm
Class Seven - 9pm
Class Eight - 9pm
Class Nine - 9pm
If i was using the sample data above and the time was between 7pm to 8pm i would like to show only the classes which started at 7pm, or if the time was 8pm to 9pm, only show the classes which started at 8pm and the same for 9pm
I hope i have explained myself clearly, and I will be thankful for any help.
Thanks
View 4 Replies
View Related
Jun 15, 2005
Hi Guys,
I`ve searched the forums, but not knowing the terminology, i cant find what I`m looking for.
I have a table which is use for a drop down list in my forms.
This is saved into a table, but shows up as a numerical instead of the name value.
Also In reports, I get a numerical value, instead of the text value.
Is there something I`m over looking ?
Or am I doing something totally wrong.
My relationships are correct. and the field data is right, I just cant over come the number issue.
Thanks in advance.
View 6 Replies
View Related
May 3, 2005
Hi,
Each client has either an entry with a correspondence number or a notes number. So, the table would look somewhat like this:
Client: 333, Correspondence: 1, Notes: Blank
Client: 333, Correspondence: 2, Notes: Blank
Client: 333, Correspondence: Blank, Notes: 3
Client: 333, Correspondence: Blank, Notes: 4
How would I make a report that will make it look like this
Client: 333, Correspondence: 1, Notes: 3
Client: 333, Correspondence: 2, Notes: 4
Thanks! Hope that was clear.
G
View 4 Replies
View Related
Jun 9, 2014
I have a list of departments, 1-17, where each needs a SUM of their price for each end of day.
At first I was going to make 17 queries, and place each into a new sub-report, but there must be a way to list all 17, even if they haven't had a sale put through.
I've tried linking using "show all values in tblDept and only those that match in tblOrder" - but I cam across a very obvious issue.
The items are grouped by Z1 Number, a unique number for the end of day sales. If there is no department linked to a Z1 number, then it won't show it. For example, if there were no sales in dept01, then there is no record under tblOrder to show a Z1 number for dept01 - so there is nothing to link to in the report.
I was then thinking of creating false data at the end of day so the Z1 number mentioned each department at least once, but that would get messy and not 'normal'
I'm thinking of a type of loop to generate the report so a 17 row report is generated,
View 5 Replies
View Related
May 14, 2013
However, the data is now showing on the generated invoice.The rest are showing up but one.I went back to the tables to check and there is data present.It used to work until recently.
View 3 Replies
View Related
Nov 24, 2012
I have one combo box bounded with two fields, Id and Description through a query.
I entered a new id in bonded table but for some reason I don't want to enter description now.
And if I delete the entered id then I will loss that unique id which is using for description, which I don't want.Now the problem is one blank space showing in my combo box.
So what criteria I should use in query criteria to avoid blank spaces?
View 5 Replies
View Related
May 28, 2014
I have a report on which I have a combo box showing text value as open issues and closed issues. What I want to do is on the report in a text box show count of open issues and closed issues separately.
View 1 Replies
View Related
Sep 20, 2006
Hi there.
I am trying to create a query to show the sum of monies received. However, where there is no money received instead of showing the value as £0.00 it comes up blank.
How do I get it to show it as £0.00 when run?
Regards
Pete
View 2 Replies
View Related
Dec 18, 2013
I'm creating a form where people can choose something in the first combo box [ComboBox1] which results in the second combo box [ComboBox2] displaying only the items that are associated with the first combo box [ComboBox1].
In my second combo box I have the amount of "empty lines" that equals with the items associated with the first combo box. But there is nothing displaying. No words.
View 8 Replies
View Related
Jan 30, 2014
I need some normalizing my data properly, and then showing the values in a form.
Currently, my table relationships look like this;
However, there can be multiple Genres per Band and each Genre will be applied to multiple Bands, and I know this is a Many-To-Many relationship, but I'm uncertain on how to create this properly and then show it in a subform in a form.
View 14 Replies
View Related
Feb 24, 2012
I am using workdays to calculate time passed between two dates. I also have a table for Holidays that I don't want counted as work days. This is working well, but I would like my queries to show a null value instead of showing #Error when a date field is empty. Here is my coding in my Module.
Option Compare Database
Option Explicit
Public Function Workdays(ByRef startDate As Date, _
ByRef endDate As Date, _
Optional ByVal strHolidays As String = "Holidays" _
) As Integer
[code]....
View 3 Replies
View Related
Aug 8, 2015
I have 7 fields in a listbox (1st is the ID, hidden) from the single table. 3 of these fields are foreign keys. How do I get them to display their related values instead of the foreign key value?
Background:I'm purpose-building my db to essentially track individually cataloged items, somewhat like a library system would. I have four main tables: tblMediaItems, tblUsers, tblTransactions, and tblLocations. Users wills be spending 90% of their time on the Details form for the particular media item record they're viewing.
I'm trying to show an item's transaction history on the main form. I added a listbox (because I liked that compact presentation style) and got the desired fields to show up from tblTransactions. I figured out how to accomplish this for a single column combo box with the wizard, but so far I don't see how I would do this with multiple fields in a listbox.
View 2 Replies
View Related
Oct 25, 2006
Hi guys,
I've tried searching all the threads for an answer to my problem and I can't seem to find it....
Ok I know this should be simple...
I know to use Distinct and DistinctRow to only show unique records in a combobox but all I want to do is that once a selection is chosen in the combobox to add a record to a subform, it can't be selected again.
I know in some cases you do, e.g. items on an invoice sometimes need to be entered more than once, but I'm listing Skills for Employees and I only want a user to enter a Skill once per Employee (although Employees can have many Skills, I just don't want a User to accidentally put the same Skill in twice or more per Employee...)...
What's the best optimized way of achieving this?
Sorry for my newbiness.
dazza61
View 5 Replies
View Related
Oct 22, 2005
I have 2 comboboxes.
i select the value from one combobox.
i want the second combobox to be filled with the values corresponding to the selected value in first combo.
first combo is bound with some other table and second combo takes vales from some other table.
How can i do this?
View 1 Replies
View Related
Mar 9, 2006
How can I refrencence any value within a combobox (not the one selected)? I want to try and acheve something like this:
cboSomething.Value(3)
Although that doesn't work. Is this possible?
View 3 Replies
View Related
Oct 25, 2006
Hi guys,
I've tried searching all the threads for an answer to my problem and I can't seem to find it....
Ok I know this should be simple...
I know to use Distinct and DistinctRow to only show unique records in a combobox but all I want to do is that once a selection is chosen in the combobox to add a record to a subform, it can't be selected again.
I know in some cases you do, e.g. items on an invoice sometimes need to be entered more than once, but I'm listing Skills for Employees and I only want a user to enter a Skill once per Employee (although Employees can have many Skills, I just don't want a User to accidentally put the same Skill in twice or more per Employee...)...
What's the best optimized way of achieving this?
Sorry for my newbiness.
dazza61
View 1 Replies
View Related
Nov 7, 2004
Hello!
I have a combobox on a form and it shows values from a query. I pick one value and presses a button, then a new form opens with a lot of information based on the value in the combo box. In this combobox I would like to have a value called "All", if I choose this one I want All of the information to be shown. I would like to know how to get this to work (create a question with a term like this: IIF([Forms]![frmMaskin]![cmbAvd]="All";Like "*";[Forms]![frmMaskin]![cmbAvd])). When I do this, I se nothing. Please give me some advice.
View 2 Replies
View Related
Apr 23, 2013
I Have to tables, Employee's & Vehicle's. I'm making a dispatch form. and i want to put a "Unit Dispatched" combo box that will populate from the Employee's ID and the Vehicle ID. We sometimes dispatch employee's to a job on their own and sometimes we send a company vehicle. is there any way to do this?
View 1 Replies
View Related
Sep 23, 2011
So I have a textbox on a form that contain values. I want to convert it to a ComboBox. Since a lot of these values are the same in a lot of records (for example, "Inventor"), I want the entered values to appear in the ComboBox dropdown so they can just be selected instead of typed in. I converted the textbox to a Combobox by right-clicking on the textbox => Change To => ComboBox. It changed successfully, but I want it to list the values in the dropdown, but it doesn't.
View 1 Replies
View Related
Feb 17, 2005
I am using a combo box to select client records. The problem I am having is that there are several clients with the same last name.
The query behind the combo box sorts on Last Name, First Name.
When I (as an example) select the second listed duplicate name from the combo dropdown, The form is populated with the data from the first duplicate name. (example Jones, John or Jones, William).
How can I make sure that the selected name will populate the form?
Thanks
View 1 Replies
View Related
