There is a continuous form with a check box in each row and a command button(cmdDetails) in the form footer section. You select a record and press cmdDetails and another form opens.
Rather than in the footer, I would like to have the command button placed in the details section itself, in each row, against each record, so that the check box can be eliminated. Pressing any button will open the corresponding form. how I can "associate" each record with the button next to it.
Good Evening, I wonder if anyone could help me please......... I have found Ghudsons attached ‘Browsing2’ example to be of enormous benefit/use to me when I have been creating various Databases, however I was wondering whether Ghudson or any other kind person(s) would either show or point me in the right direction as to how to create a ‘Delete’ facility which is very similar to the ‘Open’ command button on the continuous form.
I have attempted to adapt the enclosed 'coding' to see if it will come up with the result that I want, but unfortunately I cannot!
Attachment kind courtesy of Ghudson http://www.access-programmers.co.uk/forums/showthread.php?t=97787&highlight=browsing
Your help or assistance in this matter would be very welcome...........
I have two command buttons in a subform "sbfScoutRegDetails", one that launches a report and the other attaches the report pdf to an email, associated with the record ID when clicked.
Both of these buttons work fine when just the subform itself is open, but when viewing it in its main form, I get a window saying 'enter parameter value' for "Forms!sbfScoutRegDetails!ID" (this is the WHERE condition in the macro).The report then opens with all the record information blank.The full WHERE condition
Code:
[ID]=[Forms]![sbfScoutRegDetails]![ID]
Not sure if it's because of using a continuous form as a subform? I need the user to be able to view/print or email a contract to each group/contact that signs up.
I have a continuous form in which I put a command button for each record called "detail". I would like to click on the "detail" button and make it open another form containing all (and only) the info on this record.
At first I refused to use an "id" to link both forms, but finally I added the "id" in the table... however still does not work.
continuous form: "04 - GASTOS_BUSQUEDA" id field on continuous form: "Gastid"
pop-up (details) form: "GASTOS_EDITAR" id on pop-up (details) form: "editar_id"
This is what I have tried on the "click" properties of the "details" button field (called "btn_editgs"):
4) Private Sub btn_editgs_Click() On Error GoTo btn_editgs_Click_Err Dim strWhere As String strWhere = "[editar_id] = " & Me.Gastid DoCmd.OpenForm "GASTOS_EDITAR", , , strWhere btn_editgs_Click_Exit: Exit Sub btn_editgs_Click_Err: MsgBox Error$ Resume btn_editgs_Click_Exit End Sub
I have a continuous form reflecting events. The notes field is too large and so has to be it's own form. I made a button that is supposed to open the notes for the record. But it doesn't matter which record I'm on, it clicking the button always brings up the same note - it doesn't link the criteria and open only the correct record in the notes form. Is this because it's a continuos form? How can I fix this?
I have a continuous form with button for every record, wich has a VBA code. I want to put Button in header form, when i click it, then should run all button in continuous form. How can I do that.
I was wondering if any of you experts out there know a way to help me out here. I was wondering if it is possible to color the text on the last pressed button on a continuous form different from all the others, so people will know which one they pressed last? I've been trying a lot of different things here but i'm stuck. All i can get done is that all the buttons turn a different color, but doesn't solve anything.
I am trying to make a simple form to tally my total products ordered.
So I wanna add a plus and minus button on my continguous form, but i cant get it to work. How do i update the current record when clicking on the button next to the field ..? It seems only the first record gets updated ..
I am creating a program to allows us to figure out where our personnel are. I am using a continuous Form that shows the individuals name, phone numbers etc. and infront of that is a checkbox, and a combobox that shows "Leave", "TDY", "Contacted" etc. I also have two fields that fill up with what time they were contacted or when they reported in. The default status is "Not Attempted and the checkbox is not checked, and the time fields are blank.
I attempted to use this code:
Dim ctl As Control For Each ctl In Me.Controls Select Case ctl.ControlType Case acCheckBox ctl.Value = False Case acComboBox ctl.Value = "Not Attempted" End Select Next ctl
but it will only clear the one line (it doesn't clear the times yet, i figure i'd add that once I figure out to clear one). This seems to work if this was a single form, but not for continuous. How can I convert this for continuous forms?
I have a continuous form with a button 'Cmd1' & a textbox 'txtMail' which is set to visible no.
When the user clicks Cmd1 - then txtMail becomes visible.
I can do it using vba on the buttons click event but when it executes txtMail for all the records become visible.
How do I use a button's click event on the form's current record - Private Sub Form_Current() so that when the user clicks Cmd1 on the current record only txtMail for that record becomes visible.
So I have a continuous form and I have a button that is pressed when a job is released and it record a date in a field. I wanted to turn that button to disabled after pressed but after lots of reading found that it couldn't be done in a continuous form due to it disabling all buttons . So I decided to just make the code populate the field only if it was a null value so that it wouldn't overwrite a value if someone pressed it more than once. Well the null is my downfall in all this. I cannot make it compare and populate the date when the button is pressed. I have tried all I can find on the net and all I can think of.
I have continuous form in Access 2010. I highlight selected record. Now I would like when user will select record, that record will display button to give ability user delete it. For not selected records button not visible and disable. How to display button only in selected record in continuous form?
I created a form that lets the user choose specific criteria, through a combo box, to run a report that houses several subreports. Each combo box is referencing 4 queries needed to run the report.
=[Acctmgr_renewed_detail]![RenewalMonth] And [Acctmgr_begbal_2005]![RenewalMonth] And [Acctmgr_cancelled_sum]![RenewalMonth] And [Acctmgr_renewed_sum]![RenewalMonth]
The form also includes a command button to preview the report. However, when I click the command button, the prompts for parameter values for the report popup again, when it should just print the report. Below is the code attached to my command button:
Private Sub Command2_Click() Me.Visible = False DoCmd.OpenReport "Acctmgr_monthly_activity", acViewPreview DoCmd.Close acForm, "valarie" End Sub
Is there something I need to add to my code? If so, what? Any help would be much appreciated.
Hi everyone, I am trying to create a button on a form that will export only that record. On the command options I do not see there being an option to do such. Can anyone help? Thanks
Access 2010. I have a form pulling from a query to create a "To Do' list of sorts. On this form is a button to open an input form for the corresponding record (I hope). When this button is used I want it to pull certain data for that specific line from the query and input it into the new record opened by the button. I know this is possible as I use another db that does this but I have not been able to figure out how to make it work in the new db.
In one of my forms (which is a datasheet) I want to create a hyperlink or a command button (in each row), which enables the user to jump to another form (determined by the cell contents).
I have achieved that by replacing my datasheet with a continuous form and adding a command button. But I would much rather keep my datasheet format.
I tried to put a command button into the datasheet, but it won't display it.
Is it possible to achieve my objective here ? I am not having much joy with HELP.
I am trying to put a button on a form I have created so that I can use Filter by Form feature on it. I used the toolbox commnad button wizard and chose the Form Operations -> Apply Form Filter option for the button.
Unfortunately, this button does not work for this choice. In the Form view, if I click on this button nothing happens. Other choices in the wizard such as Edit Form Filter etc works.
Does anyone know what could be the problem? Is this an Access bug (i am using Access 2003).
If it is a bug, can anyone suggest what little modifications one might have to do to the VBA code underlying OnClick event for the button to make this command button work?
In a form of my "cities-of-the-world" database I have amongst others the fields: "Latitude" & "Longitude" Now I'm looking for the command button code that runs a querry to find all neighbouring places i.e. [Latitude] would be 'Between (Latitude + 0.75) and (Latitude - 0.75)' ... longitude likewise. In other words: When the form displays the record for Berlin, on clicking the command button there should appear a list containing the cities: Bernau, Oranienburg, Potsdam ...
Hi, I'm an Access newbie. I've designed a fairly simple database to replace an old spreadsheet that was becoming unwieldy -- it was never really used so much for calculation as for data storage, so Access seems more appropriate anyway.
One of the functions I used in Excel was the autofilter, which I found very useful for zeroing in on specific portions of the data. I was wondering how I would do the same thing in Access, and then I discovered the "Filter by Form", which works just fine -- even better actually, since it has the whole and/or functionality.
I was wondering though if it would be possible to invoke "Filter by Form" using a command button. That would make it even easier, especially for some of my users who would almost certainly not know about "Filter by Form" otherwise.
I currently have two forms: frmE_SAFind and frmE_SAOrder
frmE_SAFind shows results from a query including fields [txtIDPO] and [dtmDate] Example: IDPO Date btnOpnFrm 6543 2/1/05 btnOpnFrm 5681 1/1/05
frmE_SAOrder shows order details including [txtIDPO] and [dtmDate]
I have a open form command button set up on [frmE_SAFind] that opens [frmE_SAOrder]. Is it possible for me to modify its properties so that when the open form command button is clicked, the order details in [frmE_SAOrder] will represent the order that the user is selecting via the btnOpnFrm command?
Example: If I click btnOpnFrm for 6543, [frmE_SAOrder] will show me PO 6543 details.
Hopefully I made myself clear enough to understand. Thanks for your help!
I need to regularly use officelinks from within Access, but would like to make a command button on a form to automate the process for me, I have no idea where to start.
I have a template saved and a query built but am unsure of the code to automate this process.
I've had a search around but have been unable to find any examples of how to do this.
I have based a form on a parameter query, so that when the user is prompted to enter a 'Hobby' to search on, the relevant records will be displayed on the form.
Now, I have created a command button designed to open a template letter in MS Word for a particular hobby. The problem is, I need the command to open certain file depending upon the value input in the parameter box intially. How would I go about doing this?
