I have a form called "frmProducts" which is linking to table "tblproducts".
Easy Enough...
The form shows all the Products information (fields).
I have a "More Info" command button (cmdMoreInfo) next to every record in the form.
When the command button is clicked I would like it to open up another form "frmMoreInfo".
But On frmMoreInfo I would only like it to show that specific product.
I have tried the following code on the on click event on the command button but it was always asking me for the value of Form![frmMoreInfo]![txtInternalCode]
Code:Private Sub Command12_Click()On Error GoTo Err_Command12_ClickDim stDocName As StringDim stLinkCriteria As StringstDocName = "frmMoreInfo" stLinkCriteria = "Form![frmMoreInfo]![txtInternalCode]=" & Me![txtInternalCode]DoCmd.OpenForm stDocName, , , stLinkCriteriaExit_Command12_Click:Exit SubErr_Command12_Click:MsgBox Err.DescriptionResume Exit_Command12_Click End Sub
I need to open a specific pdf file per record by using a command button. The pdf files will all reside in a specific folder in a partition on my hard drive. Each pdf file will have a unique four digit file name e.g 1234.pdf.The file name will match a unique number allocated to each record. This number is generated by adding 1000 to the record ID.Record 10 will therefore have an associated pdf file name of 1010.pdf.I have created a text box field , named 'TestReportID', to capture the unique four digit number per record that I assume is needed to be referred to when setting up the code to find and display the correct related pdf file.
I have set up a command button on the records form and as simple test using the hyperlink address to the folder where the pdf files reside, I can open a pdf file by clicking on the command button but it does not matter what record is open when I click the command button, it will always open the same pdf file.If I don't identify a specific file name in the hyperlink address, when I click on the button it will display a file open dialog which lists all the relevant pdf files and I can then select and open the required file.I would like to cut out that step and get the correct file to open when I click the button.
I have a subform in which I want to put in a Command Button to open another form.
I used the wizard as per normal, but when you come to matching specific data fields, there is nothing in my left hand column of the sub form. I have checked the record source property and it is bound to the correct table.
I have read that this is an issue with Access 2007? Is this the case or am I missing something obvious here?
I have a form that opens from a different form based on the primary key within the original form. Unfortunately it seems to be opening a new record every time I open the form--not only from the original form but also straight from the sidebar.
The command button that opens the second form from the first uses the following VBA:
This exact coding worded perfectly in a similar set of forms that I had created; the only difference is a change in the form name & primary key field.
Add onto this, I think that the code DOES work, but then it immediately opens another new record. When I open the second form from the command button, then change to Design View, the form's Filter property is set to [Event_ID]=X (where X is the proper key from the first form) and Filter On Load is set to Yes. The X in the Filter changes accordingly when it changes in the first form. Also, every time I open the form a new record is added to the underlying table.
I've tried setting "Allow Additions" in the second form to No, but then when I open the form nothing appears. Literally; the entire form is blank, no labels, textboxes, combos, buttons or anything. When going to Design View it's still all there.
I've also checked the On_Load, On_Current & Form_Current events and found nothing. I even deleted them and the problem still occurred.
I have a continuous form in which I put a command button for each record called "detail". I would like to click on the "detail" button and make it open another form containing all (and only) the info on this record.
At first I refused to use an "id" to link both forms, but finally I added the "id" in the table... however still does not work.
continuous form: "04 - GASTOS_BUSQUEDA" id field on continuous form: "Gastid"
pop-up (details) form: "GASTOS_EDITAR" id on pop-up (details) form: "editar_id"
This is what I have tried on the "click" properties of the "details" button field (called "btn_editgs"):
4) Private Sub btn_editgs_Click() On Error GoTo btn_editgs_Click_Err Dim strWhere As String strWhere = "[editar_id] = " & Me.Gastid DoCmd.OpenForm "GASTOS_EDITAR", , , strWhere btn_editgs_Click_Exit: Exit Sub btn_editgs_Click_Err: MsgBox Error$ Resume btn_editgs_Click_Exit End Sub
I am trying to create a command button that sits on the order details page and that will open up a report i have created called 'picklist' which is basically the same as an invoice but with some different product information listed on it.
I want the command button to open up the picklist that corresponds to the order that i am on e.g picklist #2 for invoice#2
How to modify an existing database template to meet my needs.
I am trying to create a command button that sits on the order details page and that will open up a report i have created called 'picklist' which is basically the same as an invoice but with some different product information listed on it.
I want the command button to open up the picklist that corresponds to the order that i am on e.g picklist #2 for invoice#2
I would like to create a form that allows me to search for a folder on my desk top, then once located i can transfer that file to a specific location on another drive, Similar to the Browse / upload function you see on many applications.I am using Access 2003. Is this possible??
I haven't used access before and have been set the task to create a data of photos. The table is called 'Find a Photo' and contains 6 catergories of various information including river, site and date. I would like to create a search/command button by which i can type the river, site and date into seperate text boxes and search all of them at the same time.I don't know how to connect a command button to command button and not sure if any macros/queries are needed. Hope all this aint to hard to do.
Is it possible to have a cmdButton open a pre saved image from your hard drive. The images are saved with the same name as the Account Number. (ex: AcctNum -- TA123409 Image -- TA123409.bmp) I want the cmdButton to open the image filtered or based on the Account Number. If so, could someone show me a sample OnClick code. Thanks
I have created A command button (OK) on the form but can't figure out the code. My Scenario is:
1) I have 2 cascading combo boxes 2) I have a text field as attachment
What I want is to select the value from second combo box then I want to click command button to view the attachments instead of double clicking the attachment and also I wanna ask is there any way to modify the display view of attachments in access a part from paperclip and image icon.
I have based a form on a parameter query, so that when the user is prompted to enter a 'Hobby' to search on, the relevant records will be displayed on the form.
Now, I have created a command button designed to open a template letter in MS Word for a particular hobby. The problem is, I need the command to open certain file depending upon the value input in the parameter box intially. How would I go about doing this?
I have set up a database that houses file locations. The form that I have made shows a job # and the files that correlate with it. I would like to set up a command button that will read the file name and open it in Excell. If any one know how to do this I would greatly appreciate the help.
I am trying to open a workbook with a command button on a form however the path to the file is giving me a fit. The path for the file location contains spaces and I am going blind trying to figure out how to rectify the path. Heres the line. I am sure someone here will see this problem quick! Thanks.
Private Sub Command0_Click() On Error GoTo Err_Command0_Click
Ok I have a Continuous form that in one of it's fields contains Hyperlinks. The form is named [Song Info] and the field is [Play]. I want this field to be hidden and have a command button open up the hyperlink in that recordset. I think that all the info need but if not let me know.
I am trying to open MX Excel using a command button. I have tried using a hyperlink and various codes that i have found online with no luck. The Excel file is being used by Access as it bring data from the spreadsheet and displays it within a subform. (I think this is where the problem occurs) The subform displaying some data from Excel is working fine but when i click my hyperlinked button (To open the excel file) i am met with errors and the file will not open.
I am creating a database. I have all my forms, queries, tables, reports just as I need them. However, I would like to have a command button on my switchboard that will pull from a query to feed to a Word document (that's actually a letter on my company letterhead). I know a Macro has to be involved with this, but again, I have little to no knowledge of Macros. Also, I would like to be prompted to enter a client ID number when I click on this command button (because I only want to print a letter for a new client, not all of them).
I am trying to add a command button to my main menu to open the contact names as a datasheet, I have changed the properties on the contact names form to datasheet as well as changing the properties on the button to the below:
Private Sub Command48_Click() DoCmd.OpenForm "Contact Names", acFormDS End Sub
at first after I saved it, the button did nothing. Now after a bit of playing around (probably not a good idea) I have a new message that states:"The expression On Click you entered as the event property setting produced the following error: Ambiguous name detected: Contacts_Click.To add some additional information, in the vba sheet above the code i wrote above it says:
Option Compare Database Private Sub Contacts_Click() DoCmd.OpenForm "Contact Names", acFormDS End Sub
Private Sub Contacts_Click() DoCmd.OpenForm "Contact Names", acFormDS End Sub
I'm trying to use a command button in a form to filter and open a report. I am able to get it to open the report, but I cannot get it to filter the report based on a combobox in the form. I've tried every combination of code I could think of and find. Here is what I currently have:
Code: Private Sub FilterReport_Click() DoCmd.OpenReport "Report", acViewReport, "First Name='" & Me.FName & "'" End Sub
Code: Option Compare Database Private Sub Report_Open(Cancel As Integer) Me.RecordSource = Me.FName End Sub
"FilterReport" = Form Button "Report" = Report "First Name" = Report Field "FName" = Form Combo Box