I am looking for help to to generate a command line to automatically run a report within a windows program I am using. The program I use has command line fields to automatically open the access report when I complete my program session. I have tested the command line with a standard C:.... .exe to open Word, Access, etc.
I have tried using the create shortcut and snapshot methods without success and wondering if a macro is needed (havent a clue).
i want to open a Word Document in access, so i am using the Runapp macro. It says to enter a command line. So, i input the path of the document and run the macro. Then access says it cannot invoke the application.
what is the command line?
in general, how do i open a word document in access using the Runapp macro?
I have a module which reads a CSV transaction file line by line and adds the correct transactions to an access table and places the wrong ones in a logfile.Now some transactions are rejected twice there is even one rejected six times. Whereas one wrong transaction is processed only once. I am certainly overlooking something obvious in the logic but what. Here is the relevant code.
Code:
Function ImportCSVForConfederation(inputCSV, ORG) Dim TNO As Integer, TACT As Integer, TABLE As String, TLINE As String, I As Integer, J As Integer, K As Integer Dim FLD1 As String, FLD2 As String, FLD3 As String, FLD4 As String, LogFile As String, LogPath As String Dim Lim As String, ITNO As Integer
Guys, any idea how to evaluate the command line options used when an Access application is started from a command line. For example I use the following command line: C:..MyDatabase.mdb /parameters:110001110 Then, in VB, I evaluate the string "110001110" and do the further job. Is there any property or function to return the command line option string? Thanks
I am trying to run the batch job from the command line. I created AutoExec macro in the mdb(msaccess 2007) which is calling someMainMethod() . How can I pass batch job id to the mdb?
I have been trying to find the symbol or text to force a new line on a command button in a Access Form and have not had any luck. I have the command button pretty large and want 2 lines in the button. If anyone knows how to do this that would be great. Thank you very much !!!
This may not be an Access problem per se, and if not, I appologize in advance.
I have a FE/BE split database with multiple users. I have found out how to add a command line switch to the shortcuts (the shortcut must go to the application first for any switches to work) which opens the database front end nicely. Problem is, I can't get it to connect to the appropriate WIF.
I have tried copying the text from "Microsoft Access Inside Out" which didn't work as it has "/wrkgroup" rather than "/wrkgrp". My set up wouldn't accept that.
Anyway I'm half way there but stuck now. I don't get any error messages when I use the shortcuts but Access stays joined to whatever WIF it was connected to the last time it was running.
I have searched this site but couldn't find anything regarding this specific problem, in the recent past at least.
Any ideas what I'm doing wrong?
I have copied the details from the 2 shortcuts below. The first is to my database and the networked WIF, the second to Access to return the desktop PC to the default WIF. I have also added the Access version number and operating system version numbers.
This is the shortcut to my database with the workgroup switch set to the WIF created for this database:
Is there a command line argument to open AND close a db? I am running a schedule task to open a db which has an autoexec macro but I don't want the db to stay open after running the macro. Or is there a close db function in a macro? I see close form but not db.
Is there a way to use the find command in access in one report to search throughout the whole database. For instance, I am designing a database that in a report it shows the number identifier of an item, and the actual detailed information is located in a separate form. What I want it to do is to be able to find the detailed information from a command within the report that only has the number identifier.
I am working on supporting spaces in the DB filename. I got the rest of my program working... other than being able to invoke Access with the specified filename for it to open.
Code: C:Documents and Settingsc_mlueckMy DocumentsFandango>"C:Program FilesMicrosoft OfficeOffice12MSACCESS.EXE" "Schema Ideas.accdb"
C:Documents and Settingsc_mlueckMy DocumentsFandango>dir "Schema Ideas.accdb" Volume in drive C has no label. Volume Serial Number is C8E4-5856
Directory of C:Documents and Settingsc_mlueckMy DocumentsFandango
I have had my 4th SQL/APP Dev lab class, however I missed the 5th.
Our 5th lab was .
1. Create 3 tables, populate with given data and create relationships. 'Customer, Invoice, Payment'
2. We were given 8 queries to try do, we had to come up with which commands would be used.
I have no 1 completed.
As for no 2.. we are still learning all the commands, so the lab here is for us to find what commands we think will be used. I have researched and have them all 6 queries we have to run.., I have all those commands written out on paper which I think are answers..how to find the command line to test them.
what is the correct syntax to write a command line able to UPDATE more than one field in the table records having multiple WHERE criteria.
Here is my challenge:My TableI has the columns A, B, C and D which are populated, for example, as follows:
TableI A B C D 1 2 2 6 4 3
1 7 5 9 1 2 2 5 8 5 etc.
I also have a FormII which updates TableII. Among the existing fields of TableII there are the fields C and D (same as above). When saving data entry thru the save button of the FormII, fields C and D will be naturally saved on the TableII. Well, I also want C and D info updated into Table I as well, but only when field A=1 and B=2.So what I need (for the click event of the button save in the FormII) is to open TableI and either insert or update it with the values of the fields C and D in every record WHERE A=1 AND B=2.For instance, assuming C=& and D=%, the desired result should be as follows:
TableI A B C D 1 2 & % 2 6 4 3 1 7 5 9 1 2 & % 2 5 8 5
I did not find any examples in the net including multiple criteria..Here is what I wrote unsuccesfully:
Private Sub BtSalvarFrmII_Click() CurrentDb.execute "UPDATE TableI" Set FieldC = Forms!FrmII!FieldC.value AND Set FieldD = Forms!FrmII!FieldD.value WHERE FieldA = 1 AND FieldB = 2 Docmd.save Docmd.close End Sub
Hi all, I'm new to this forum. I'm having a problem with a query I'm trying to create.
I have two tables in the database: tblCustomers and tblInstallations. These two tables are linked by a field 'CustomerID'. CustomerID is the Primary Key in tblCustomers. In tblInstallations, the primary key is InstID and for each CustomerID in tblInstallations there are either 1 or 3 InstID records.
Now what I want to do is create a query with fields: Customer; CustomerID; InstID1; InstID2; InstID3. InstID1 will contain the first InstID for the CustomerID, and InstID2 & InstID3 will contain the second and third, if applicable.
I see in Query Design View in the 'Totals' line there is a option to display the 'First' and 'Last' match for a field. So is there any way i can use this method and also display the second record? If not, is there any other way to make this query work?
I am teaching myself Access 2007. I have a successfully imported my database to a table, and now I want to design Forms and Reports. It seems Access wants to basically display the data in either one of two formats, either Columnar, or Tabular. One Form displays the data in columns, with one field per line, and the other displays the data in rows, with one whole record per line. I need a Form (and Report) which will display more than one field per line, and use more than one line. For example, some lines will have 2 or 3 fields, then the next line may have only 1 or 2 fields. Following is a print-out of a record from my existing database (stored in a comma delineated .txt file and read and printed by a program written in DOS, QBasic): . 461-1036 :c: Assignment of O&GL Feb 28, 2008 Filed: Mar 20, 2008 Grantor(s): Plains Exploration & Production Company; Plains Resources Inc.; Pogo Producing Company LLC; Pogo Panhandle 2004 LP; Latigo Investments LLC; Latigo Gas Services LP; Latigo Petroleum Inc.; Latigo Petroleum Texas LP Grantee(s): Oxy USA Inc. Comment: Assigns 50% of Assignors' interest; CORRECTION ASSIGNMENT at 466-493 deleting certain properties from the description
[The attached .pdf file shows a better view of the print-out]This data is abstracted version of a document recorded in the public record in a courthouse. On the first line there are 3 fields:
1) the Volume-page, 2) A notation that we have a copy of the document, and 3) the title of the document.
On the 2nd line there are 2 fields:
1) the date of the document and 2) the date the document was filed in the courthouse.
The next 3 fields are displayed one at a time in columns. How I can get Access 2007 to display like this?
Hello, I've been attempting to run dos commands from access by attaching dos commands to buttons on a form. That part has gone smoothly. However I have been unable to get the output from the dos commands to display on the form. Any input would be greatly appreciated. Thanks very much.
I have text in a number of fields that I want to insert into a text box on a report. The size of the text box is large enough to accommodate, but I want each line to have a linefeed (or carriage return) before it.
The report is based on a query. I created a field in the query that consists of something like:...txtText1 & CHR (10) & txtText2 & CHR (10) txtText3 AS MYTEXT.
What I did was to set the control source on the text box to MYTEXT, hoping that there would be nice linefeeds in between the fields. Unfortunately, all I got were some funny-looking boxes.
What's interesting is that you CAN insert a linefeed into a memo field and that linefeed will display properly. I just don't know how to force one in there to separate lines of text.
I try to explain my problem. There is a report have 50 records. I print the report first time and Set the number by Data>running sum method. This start from 1 to n...
I require a Form Where i enter to initial number example 22 and say preview report. The report Set the line number of Details Section Like 22 23 24 etc...
My issue is when there are 4 records (store numbers) for any "row" on the load diagram, the last store's information is duplicated when the report is printed. It only appears once in the table, it only appears once in the query, but when the report prints it prints two lines. It also does not include the duplicate line in the totals at the bottom of the report. This leads me to believe that the issue is in my PrintLines function which is in the modPrintLoadDiagram but I am only a beginner when writing code and have not been able to figure it out on my own.
I am attaching a version of the original database. Please open rptLoadDiagram in Print Preview and look at row 3 on the right side. Store 5449 is showing up twice but should only be on there one time.
This is the only issue holding up my roll out of the database.
