Dear All:
I have created a form where data is entered. I wish to place a command button on the form and when it is pressed, it deletes data in specified textboxes. The texboxes are: LAST_NAME, FIRST_NAME, MIDDLE_NAME.
I assume this is done using vb, but I am clueless.
Any help is most welcome.
Regards,
Dion
All I am trying to do is insert to have a form with a "Delete Record" button on it. The problem is I don't want anyone to be able to delete a record, I would like someone to have to insert a password to confirm the delete.
View 13 Replies View RelatedHello,
I have a delete query in my database which I would like to run from a command button on a switchboard. When I use the command button wizard, it does not show delete queries in the menu of available queries. If I create a command button manually I will need VBA code for the event procedure.
Can someone give me an appropriate code for running a delete query with a command button?
Thanks
Hello all:
Code:
Private Sub DeleteRecords_Click()
Dim db As Database
Set db = CurrentDb
db.Execute "Delete * FROM tblJune 2005 applicants;"
End Sub
I am trying to delete all records from a dabase created in access. When I click the command button, I get this message: "User-defined type not defined"
Any suggestion on how to fix this error?
Many thanks in advance,
Dion
Hi!
I'm having problems making a command button(Ta bort från engelska till svenska) of a delete query.
The name of the query is"Ta bort från engelska till svenska", which is also the name of the button on the form(huvudformulär)
Could someone please help me.
I'll enclose my zipped database.
Nille
Good Evening,
I wonder if anyone could help me please.........
I have found Ghudsons attached ‘Browsing2’ example to be of enormous
benefit/use to me when I have been creating various Databases, however I was wondering whether Ghudson or any other kind person(s) would either show or point me in the right direction as to how to create a ‘Delete’ facility which is very similar to the ‘Open’ command button on the continuous form.
I have attempted to adapt the enclosed 'coding' to see if it will come up with the result that I want, but unfortunately I cannot!
Attachment kind courtesy of Ghudson
http://www.access-programmers.co.uk/forums/showthread.php?t=97787&highlight=browsing
Your help or assistance in this matter would be very welcome...........
Best Regards
CarolW
I have created a form and need to be able to delete employees from a table. I built a command button using the wizard and this is the current vb code-
Code:
Private Sub cmdDeleteEmployee_Click()
On Error GoTo Err_cmdDeleteEmployee_Click
DoCmd.RunCommand acCmdSelectRecord
DoCmd.RunCommand acCmdDeleteRecord
Exit_cmdDeleteEmployee_Click:
Exit Sub
Err_cmdDeleteEmployee_Click:
MsgBox Err.Description
Resume Exit_cmdDeleteEmployee_Click
End Sub
But when I click on the button I get a message saying it would create duplicate data in the table.
I am trying to create a command button that will delete the current records in both the subform and main form.
I know how to create a command button that will delete the current record of which ever form I'm in (either the sub or main form) but I wish to do so both at the same time with one event procedure. I currently have been experimenting with a button in the subform but I don't really care if it's in the subform or main form.
Hiya guys! This time around I need to know how to use a command button to input the date/time into a text field by the event OnClick.
I would have thought by inputting: VisitDate.Value=Date() it would have worked but no such joy.
Sorry if I sound really stupid! ;)
Thanks!
Jay
Good Morning to all:
I have created a form using Access 2000. Within this form are names address, Student ID'S, etc. In addition to this form, there are queries in there as well.
I wish to place a command button on this form so that when pressed, it imports data from another file(Excel). I assume the Excel file field names that I wish to import must match the table in Access 2000.
Is there a way to do this? I am completely lost.
Many, many thanks,
Dion
I know this topic has been discussed, but i could not find one thread on the general purpose of exporting an excel table/form to excel.
I would like to place a command button on my FORM, and let the user click this button and export the data into excel.
I tried using the transferspreadsheet method, but could not corrrectly, if at all get it working, and the help section within access2003 onlu covered importing into access from excel.
Please, if anyone has any links to sites/tutorials/ threads i misssed actually covering this topic/or thier own help, it would be greatly appreciated.
Thanks
Connor
I'm looking for someone to help me with a solution to my problem of importing data into a data table.
What I'd like to do is have a command button on a form. When this button is clicked the records in a table are cleared out. Then I'd like for a browse window to come up to locate an Excel file. The user would select this file and the data would be imported into the data table that was just cleared.
Can this be done without too much trouble?
Thanks, Paul
Well the title says it all. I need to create a button to lock the info on the form so it can't be edited and at the same time insert the date. Any ideas?
View 1 Replies View RelatedIs it possible to have a command button on a form that when clicked will turn the data entry property from yes to no?
View 3 Replies View RelatedI'm trying to design a command button on a Form so the user can import the contents of an Excel spreadsheet to an existing Table in Access with the click of a button. But, i'd like the imported data to overwrite the existing data in the Table and not append to it. I've considered using linked tables but apparently you can't set Primary Keys when you do it this way.
View 4 Replies View RelatedCode that will allow me to post selective data from a purchase received form to the inventory using a command button. this command should also add to the existing quantity in the inventory.
View 2 Replies View RelatedHow can I automate different printers for different reports on the same MS Access 2007 database, without having to select the printer each time?
There are two reports that are printed on the same database. Previously, I had automated form buttons to print the reports, without having to select the printer each time. This was about 8 years ago, but I don't remember how I did this. Also, I don't know SQL. Nothing against code, but I did not know how to program, and just MS Access 2007 access itself.
I have a subform in which I want to put in a Command Button to open another form.
I used the wizard as per normal, but when you come to matching specific data fields, there is nothing in my left hand column of the sub form. I have checked the record source property and it is bound to the correct table.
I have read that this is an issue with Access 2007? Is this the case or am I missing something obvious here?
There are 4 unbound dropdown list box that will have a default value of empty string. All 4 must have values entered (data is required).Once all 4 are required - the bottom 5 text box will become enabled (optional data).Forcing the user to click on a Validation Button
Some users type then use the mouse to select the next.Other users type to select then tab.The trick is: After filling in the 4th listbox and validating all 4 have values, the event must trigger code to enable the 5 optional text boxes below.This provides a seamless data entry environment.
I have been doing this in other places, but the transisition after the last required field is complete gets ugly.If Trim(cmbBoxname1 & "") = vbNullString ' check all 4..If it is the 4th one, the event seems not to happen quick enough for the bottom 5 text boxes to be enabled so the user can continue with data entry.
In Access 2007, I'm using labels as buttons because they can be made pretty. Since labels can't have focus, the focus is not shifted from whatever textbox users are in on button press. The value in that textbox is not considered updated when the macro runs, and things get messy from there.
I had been using a setfocus between two textboxes to work around this, but that seems like a copout. I now have a simple form with just a textbox and a button, so this seems like a good time to learn the right way to do this.
I am rewriting an old Access 2003 database in Access 2010. When creating new command buttons, the current theme gives them a default appearance. I need to apply this appearance to old command buttons. I know there is a way to select the default button and apply its properties to others quickly. I have done it before but didn't write the process down .
View 2 Replies View RelatedI have a form with 2 option buttons on it one with year 12 on it and one with year 13. I have a simple form with drop down menus and text boxes allocated for year 12s and 13s. I want all of the year 13 text boxes and drop down lists to be locked if year 12 is selected and I want all of the year 12 text boxes and drop down lists to be locked if year 13 is selected. I do not want to over complicate the form by hiding parts of it or having a new form open depending on the option button selected.
View 9 Replies View RelatedI have created a web-database (? - There are globes over all the forms and tables icons) based on the Issues & Tasks template. This means that most of the data is entered and seen on the "Main" form, which has two tabs - Open Issues and Closed Issues. I have created a form that allows people at my work to input the necessary data and save it, so that it will show up on one of the two tabs. However, once a record has been created, I want to be initially locked if the ID/PK is clicked, so that data can't be changed or entered inadvertently.
SO, I changed the code so that when the ID/PK for a record is clicked, it brings up a different form, but one that looks exactly like the one that is brought up when entering a new form, but I locked all of the fields so that the information cannot be changed. It seems from what I have read that I can create a button on this form so that when clicked, it unlocks the fields on the form so that they can be changed, and then when clicked again it will lock the fields again. Is this true? If so, how can I do it? Or is there something similar I can do? I have seen codes that I could copy and paste, but I cannot figure out the place to copy and paste codes in Access 2010.
I have changed the Form properties so that Data Entry and all the "Allows" are set to No...
Hi, I have got a small problem and maybe someone could advise me.
I am creating a customised command button from a label button. The new button works fine but I can't apply the 'requery' function to it, if i do an error occures and i am being prompt to save the data first???? :confused: :
Private Sub Labelsearch_Click()
Me!itemquery.Requery
End Sub
Private Sub Labelsearch_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Me.Labelsearch.SpecialEffect = 2
Me.Labelsearch.BackColor = 255
Me.Labelsearch.ForeColor = 10092543
Me.Labelsearch.FontItalic = True
Me.Labelsearch.FontBold = True
End Sub
Private Sub Labelsearch_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Me.Labelsearch.ForeColor = 255
Me.Labelsearch.FontItalic = False
Me.Labelsearch.FontBold = True
End Sub
Private Sub Labelsearch_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single)
'Come back to initial state when button release'
Me.Labelsearch.SpecialEffect = 1
Me.Labelsearch.BackColor = 16373685
Me.Labelsearch.ForeColor = 8388608
Me.Labelsearch.FontItalic = False
Me.Labelsearch.FontBold = True
End
If I create a command button with the wizard and assign the code :
me!itemquery.Requeryto the on_click event my form is working fine.
Why is his code is not working if I assign it to a label? :o
my database just records end of day sales figures which are entered though a form, after they are entered the total for the day is archived. However the problem i have is that the i need some way of clearing the input table with a command in the form.
View 2 Replies View RelatedWhen I had a subform (continous form) I had a code which check, that record was used in other form, if yes, then code not allowed to delete this record, if not, record was deleted. But now I have a datasheet form, and the question is, What should I do, to have the same results what I had in continous form.
Now it doesn't matter that I past this code in "Before Del Confirm", "On delete", "After Del Confirm", this code doesn't work in this view of form. Always if I click (right button) on record, then i choose "delete record" MS Access delete my record without checking that was used in other form or not.
Code:
If Not IsNull(DLookup("Id_Gora_Zlecenia.Value", "TblDolZlecenia", "Id_Gora_Zlecenia.Value=" & ID_gora_zlecenia)) Then
MsgBox "You can't delete this record because it is used in another form"
Exit Sub
End If
DeleteRecord Me
End Sub
DeleteRecord:
Code:
Public Function DeleteRecord(ByRef f As Form) As Boolean
DeleteRecord = False
On Error Resume Next
DoCmd.SetWarnings False
If Not f.NewRecord Then
DoCmd.RunCommand acCmdDeleteRecord
[Code] .....