Hi there,
I'm trying to 'rank' x5 categories that overlap. To determine the ranking i'm utilising date & time (if the dates are equal). I've managed to do this comparing x2 of the categories but struggling with the logic for x3,x4 & x5 categories
I have the data in separate tables by category date & time and in one large table.
Hoping someone can assist as my head is starting to hurt.
Thanks
I have a table which list a load of items, one field is date and one field is time.I have a form with two date boxes and two time boxes, the idea is for the user to search between the two inputted dates and the two inputted times.This then runs a query for a report to be produced. The problem I having is getting the query to runs both criteria it returns nothing.here is the Where part of the current SQL.
WHERE (((tblIncident.IncDate) Between [Forms]![FRM_SearchMulti]![txtrepdate]
And [Forms]![FRM_SearchMulti]![TxtrepDateB]) AND ((tblIncident.IncTime) Between [Forms]![FRM_SearchMulti]![txtreptimea]
And [Forms]![FRM_SearchMulti]![txtreptimeb]))ORDER BY tblIncident.IncDate, tblIncident.IncTime;
Running Access 2010 and developed this query to filter out data from a table between times on 2 dates (day before report run and day of report). Covers data from a shift that carries over to the next day.Trouble is, the PC i developed on still operates the query as expected. However, on the PC the database resides (not networked just stored) and operates, the query brings up no data at all unless I remove the Time filtering.
This PC used to operate correctly up until early this year (about 18 months operated correctly) when the PC was replaced due to failure. Access version is the same and I am at wits end to what the cause is. Here is what my query looks like:
Quote:
SELECT Breakdowns.BreakdownDate, Breakdowns.Time, Breakdowns.Shift, Breakdowns.Downtime, Breakdowns.Equipment, Breakdowns.Conveyor, Breakdowns.Fault, Breakdowns.Stopper, Breakdowns.Gate, Breakdowns.Dolly, Breakdowns.Carrier, Breakdowns.FaultType, Breakdowns.Comments, Breakdowns.Tradesman
FROM Breakdowns
WHERE (((Breakdowns.BreakdownDate)=Date()) AND ((Breakdowns.Time) Between #00:00:00# And #6:29:00#) AND ((Breakdowns.Shift)="Night")) OR (((Breakdowns.BreakdownDate)=Date()-1) AND ((Breakdowns.Time) Between #22:30:00# And #23:59:00#) AND ((Breakdowns.Shift)="Night"));
hi
I've got a series of analytical data tables and queries setup.
one of the queries will do a length weighted average based on a user input FROM and TO distances, this query works fine and produces a report.
What I have is a table that contains a list of m FROM TO distances,
rather than picking them one at a time I'd like to set up a report that would get the FROM TO info from the Table, call the query and report each of the FROM TO distance averages on a line in the report.
What's the easiest method to use to set this up. any code snipets would help to get me started and any help greatly appreciated.
I have a report that is based on a query. In the query, I have it prompt for a criteria for a field. It prompts for the name of an event, so only the participants of that event are displayed.
Also on that report, I have a subreport, which is based on that same query, but returns different data.
My problem is that since both the main report and the subreport are based on the query that prompts for input, it's prompting me multiple times for the same input when I view the report.
Is there a way to have Access use the same prompted input for both reports, so I don't have to enter it more than once?
I have a reasonably complex query (3 subqueries into 1 main query) which gathers data from various tables into a single dataset based on a specified date.
I now need to generate a similar dataset but across a range of dates (a month) for reporting purposes. However, I can't just adapt the query and change the parameter from a "=#<Date>#" format to a "Between #<Date1># And #<Date2>#" format
The reason being, each date has to be treated individually and has to be queried as a standalone. It's to do with the type of data I have (one-to-many relationships between tables)
So what I really need to do is run the same query multiple times, for each date in scope, then stitch all of those datasets together into one 'giant' one.
How to do that in SQL (effectively, have one query produce the dates in scope, then join that onto the other query, passing each date as the parameter - I don't even think that's possible to be honest)
The other option I can think of is to use VBA to loop through the dates in scope, then use a QueryDef object to set the parameter and read the records for each date into a Recordset object. But then I have the problem of stitching all the Recordsets together, without looping through all the fields and rows each time.
Trying to compare start and end dates using a query so this is what i have but nothing is comming up wrong way to go about this? i need to do this for every month till 2012
Expr1: [Start Date]=[Start Date]>1/1/2008
Show: No
Criteria: True
Expr2: [End Date]=[End Date]<1/1/2008
Show: No
Criteria: True
I am trying to compare 2 dates, see if one is less than the other, then do something.
If [Min Request Date] < Now Then
Me.[Request Type] = "New"
Else
Me.[Request Type] = "Old"
End If
BUT I always get "Old" no matter what the min Request Date is. Does the Min Request Date need to be formated somehow.
Hi people,
For the Record Validation of: [Return_Date]<=[Service_Date] I get the following error message when trying to save:
"Invalid SQL Syntax - cannot use multiple columns in a column-level CHECK constrait"
Why? How is this SQL anyway? its a validation rule?!?!?!
Thanks. Neil.
Jus thought I'd offer this code to the forum as spent a long time finding a suitable solution..
SELECT DischargeTime.ID, [Arrival Times].ID, [Arrival Times].[A&EArrivalDate], [Arrival Times].[A&EArrivalTime], DischargeTime.[Date of outcome], DischargeTime.[Time of outcome], DateDiff("d",[A&EArrivalDate],[Date of outcome]) AS DateDifference, [Time of outcome]-[A&EArrivalTime] AS TimeDifference, IIf([DateDifference]>=1,([DateDifference]*(1/24)*576)+[TimeDifference]*(1/24)*576,([DateDifference]*(1/24)*576)+[TimeDifference]*24) AS hours3
FROM DischargeTime INNER JOIN [Arrival Times] ON DischargeTime.ID = [Arrival Times].ID;
Basically I had an admission date and in a seperate box an admission time and then I had a discharge date and discharge time again in seperate boxes. The information was spread over two tables hence the join. How I solved the problem was by gaining both the days difference between and then the difference in hours and then I created an iff function and played around with it till it worked. Dont really know how i got it working in the end but it does so hopefully this code will save some1 alot of time!
(I know that if id shown my dates as date/time in 1 box the problem would have been much easier solved, however I dont personally like displaying dates and times that way especially when you have inexperienced people entering data)
Find below a result from the query
DischargeTime.IDArrival Times.IDA&EArrivalDateA&EArrivalTimeDate of outcomeTime of outcomeDateDifferenceTimeDifferencehours3
1119/06/200715:0420/06/200712:00103:0420.93
In my table I have the following 4 fields with the associated date field:
Bronze: 11/1/2013
Silver: 5/1/2014
Gold: 11/1/2014
Platinum: 5/1/2015
I am trying to calculate a value based on comparing the current date to the dates in these fields. I am using the below formula. However, using 6/27/2013 as the current date, my formula keeps resulting in "Bronze" when it should result in "Standard" Am I doing something wrong?
=IIf(Date()<[Bronze],"Standard",IIf((Date()>=[Bronze]) And (Date()<[Silver]),"Bronze",IIf(Date()>=[Silver] And Date()<[Gold],"Silver",IIf(Date()>=[Gold] And Date()<[Platinum],"Gold","Platinum"))))
I have a table with a separate record for each client.
Each record has 5 future dates called ToDoDate1, ToDoDate2.... and tasks to be done called ToDo1, ToDo2....
I want to create a query that will search the 5 dates from all client's record and pull all the dates selcted within a range and list the ToDoDate, ToDo and name and a report.
I created a parameter query to prompt for user for dates to search between and can get the report to work for ToDoDate1 but I'm unsure of how to do this for the multiple ToDoDate fields.
Any help would be appreciated. Thanks
I have a list of dates and I want 1 query which counts the dates between numerous criteria. for example, colum 1; dates between 1/1/14 and 16/02/2014. Colum2 between 17/02/2014 and 15/04/2014.
I have attached a screenshot.
I am really new at access 2003 and queries s forgive me if this question is really dumb/simple/confusing...here goes
I created a query where I ask the user to provide the info for the date range..<[Before date]
it worked fine.
I then added something to the database and ran it again and it now asks me for my date not once, but twice..i then copy and paste query with a new name and it asks me for the same info 4 times
Help me please..Thanks
Hi again everyone,
With help on my first question Ive now got my cascading combo boxes working to a stage that shows all the information I need,
Currently Ive got 4 cbs and they work bring in and updating depending on what is selected in the previous etc etc.
combo1 = 2
combo2 = 5
combo3 = null
combo4 = null
how can I tell it to use combo2 since there is no values selected in 3 and 4
Ive currently got the combo boxes in a form of their own, basically in my main form Id like to be able to click on a button to update a value, and then it will bring up the form for the combo boxes, then id select the values till I had what i needed, and then it would fill in the value on the main form with my selection from the combo boxes,
to make it abit harder, on the main page, there is 3 values that will need to get their value from the combo boxes, will that just mean I have to make 3 forms with the combo boxes in them, one for each of the values on the main page, or could I just have one form and maybe put a button saying (Use this Selection for Value 1)(Use this Selection for Value 2) etc etc.
Ive looked through the net alot and cant seem to find any examples that suit my question... but if anyone knows of a good example that would be awesome.
Cheer Ezy
Hi Everyone,
I am trying to compare/relate two columns in two tables to each other in access, where the results shoud return similarities among both colums from both tables.Even if one column has some parts of it.
Example;
T1 T2
Name Members
John Johnson.kay
mike mike
Daniel Danielson.mic
Richard Richardson
I tried; "like[T1.Name]*" in the criteria section of Members.Need Help pls.
Okay that Title sounds confusing, but so is this task. Let me explain what I'm trying to do:
I work for a property management company and I'm trying to build a database that will allow me to catalog the inventory of furniture in several (thousand) rooms in several different buildings.
There are several types of rooms on campus all with different requirements. I want to eventually create a "standard" inventory list for every TYPE of room and then compare the actual inventory of each room to the standard inventory of each TYPE of room to make sure it is correct. The problem is that every room has several possible acceptable standards.
I was thinking that for each TYPE of room I could have several possible standards and then run a query that returns all rooms that do not match any of their standards. Does this sound doable? Any suggestions for how I might run that? Am I in way over my head? haha
We have an "item" table that contains information specific to an item (the item number is unique); and multiple "production line" tables. There is a relationship between the Items table and the Production Line tables (all 8 of them). Each item can be entered on 1 or more production line tables because one item may be produced on multiple lines and the settings vary based on the line they're produced. When entering an item in the Production table we MUST make a selection from the Item table.
Now, what I want to do is identify which item number(s) from the Items table does not have a specific field entry in ANY of the Production Line tables.
Hello All,
I am creating a database that is supposed to capture the employee's type of work, time it takes to do the work, etc...
So far, it does what it's supposed to do but my record's are all over the place.
E.g. i have tables called:
tblDailyActivities - this table is supposed to store all record without sorting.
tblemployees - this table is supposed to have a list of employees and when maximized, all records associated to that particular employee should be listed.
However, the i have right now is that instead of listing it under the particular employee, it lists the employee's name individually for each item listed.
What i want is to for the tblemployees to be listed like tblfunctions.
see attached database since i probably am not making any sense right now.
Thank you,
John
I have a report with a subreport. I have added a parameter to the query to prompt for [manager] or is null to get all managers. However, on the report when I enter a manager my count on the subreport still returns the count for all. So, I added the same prompt to the query for the subreport. It returns the right count, however, it prompts for the manager multiple times. How do I get it to prompt only once yet get the right total?
View 1 Replies View Related Hi everyone
I'm a very very new access user so many apologies in advance for when I have no idea what I"m talking about.
I'm working on creating a report that will display multiple expiration dates. Currently I have an employee database, not created by me, that has all of our employees professional licenses listed.
Prof license, auto license, liability, etc.
I want to create a report that will tell me what has already expired or will expire in the next 30 days.
I did use this
Between DateAdd("d",-30,Date()) and Date() and it is bringing back info up to 2009. which isn't what I need. I'm sure I'm doing something wrong here.
I want anything that has expired regardless of the date from today, before today, and 30 days from today but I don't care about anything more than 30 days from today's date.
I noticed that when I looked at the existing database that the fields are set as text fields. I tried to change them to dates and it gave me a "deleting 106" records error message. Yikes!
Any help would be appreciated. I don't really understand expressions and I don't understand if I'm supposed to put the actual date in parentheses or what. Please pardon my ignorance.
Many many thanks.
I'm creating a database for my wife to use in her work, one of the fields is dates visited and the user should enter "00/00/0000, 11/11/1111, 22/22/2222, 33/33/3333" in this format. The field is a large text format because there could be anything from 1 date to hundreds. What I need to be able to do is in my query I need to enter 2 dates and have access return a how many dates exist between those 2 date values. eg It will pop up a box asking for start date and then another asking for end date and then it has to return the count total of how many dates exist between those two date values. I don't know VB and have had only basic training in Java and C# none of which involved Access. The only way I can think of doing it is to have access count the number of commas within the date field required but I don't know the formula required assuming it can even be done.
View 1 Replies View RelatedI hope someone can help me on my problem below:-
A user wanted to key in the data in a single form where she can select where
a particular procedure is located. The procedure could be duplicated and
placed in a few departments.
My tables are as follows:-
tbl_Proc_Dept:-
ProcNo - Text (Primary)
TrgConducted - Yes/No
DeptAbbv - Text (Primary)
tbl_Dept:-
DeptAbbv:- Text (Primary)
DeptDetails:- Text
I created a form where i have the following fields in the form:-
1. ProcedureNo - Text
2. TrgConducted - CheckBox
3. MainDept- ComboBox (DeptAbbv data field)
4. Finance – CheckBox (DeptAbbv data field?)
5. Admin – CheckBox (DeptAbbv data field?)
6. Purchasing – CheckBox (DeptAbbv data field?)
7. Facilities – CheckBox (DeptAbbv data field?)
8. MIS – CheckBox (DeptAbbv data field?)
How can I add multiple deptabbv field in a single form?
Pls help.
Thanks.
Hey all, i would appreciate some help with Access here.
I am an attorney, and i am trying to set up an access database for all of my cases.
I have one table in which i keep the names, contact information, etc of all the witnesses who i have used or will be using (especially expert or law enforcement witnesses who i will be using in multiple cases).
I also have a main table in which i have a record for each case. Because I have multiple witnesses for most of my cases, I have had to create multiple relationships between my main cases table and my witnesses table.
My question is this: How do I specify when setting up a report (or a form/query/etc) that when i ask for the witness's address i am looking for the address i made with a particular witness, specify that relationship between the two tables, as opposed to the other relationships between the same two tables.
I hope that makes sense, and i would very much appreciate if someone could give me instructions.
Thank you.
Jay B
Here is my delima, I have a report that I am able to type in a keyword and it will pull up that report exactly as I type the keyword, however, let's say that I want to pull up someone else's report I cannot. I have to exit out of my report and then go back into it and resubmit the new search.
View 13 Replies View RelatedI have a situation where I am using a maketable query to create a table and then I need to use append queries to then add additional records to the created table - some of these are just run once and some multiple times.
if possible, I do not want to hard code the query multiple times i.e.
Code:
DoCmd.OpenQuery "qryCreate_1"
DoCmd.OpenQuery "qryAppend_1"
DoCmd.OpenQuery "qryAppend_1"
DoCmd.OpenQuery "qryAppend_1"
etc
So is there a way I can run the make table query and then get some sort of loop to run the append query a number of times ?