Trying to compare start and end dates using a query so this is what i have but nothing is comming up wrong way to go about this? i need to do this for every month till 2012
Expr1: [Start Date]=[Start Date]>1/1/2008
Show: No
Criteria: True
Expr2: [End Date]=[End Date]<1/1/2008
Show: No
Criteria: True
I am trying to compare 2 dates, see if one is less than the other, then do something.
If [Min Request Date] < Now Then
Me.[Request Type] = "New"
Else
Me.[Request Type] = "Old"
End If
BUT I always get "Old" no matter what the min Request Date is. Does the Min Request Date need to be formated somehow.
I have a query that is generating two colums, one the states the Start Date and the other that States the End Date. I need to display another column that displays the time difference between the two. Any ideas how?
View 10 Replies View RelatedHi people,
For the Record Validation of: [Return_Date]<=[Service_Date] I get the following error message when trying to save:
"Invalid SQL Syntax - cannot use multiple columns in a column-level CHECK constrait"
Why? How is this SQL anyway? its a validation rule?!?!?!
Thanks. Neil.
I'm new in Databases and Access, so my problem is very simple.
I have a table with three fields: Name (Prim. Key), Start Date (Prim. Key) and Cost.
I want to obtain a query with this fields:
Name
Start Date
End Date (where the End Date would be one day before the next start date)
Cost
Thank you
I have created a query that prompts the user for a start and an end date and proceeds with showing the data between those dates.
I was wondering if there was anyway that instead of the user typing in the dates, a calendar could pop up and they could pick the start and end dates instead?
If that isn't possible is there anything else that's simpler that I can do? Maybe like a list box for month, date, and year?
Hi there,
I'm trying to 'rank' x5 categories that overlap. To determine the ranking i'm utilising date & time (if the dates are equal). I've managed to do this comparing x2 of the categories but struggling with the logic for x3,x4 & x5 categories
I have the data in separate tables by category date & time and in one large table.
Hoping someone can assist as my head is starting to hurt.
Thanks
Hello Everyone,
I would like to run one query that can accommodate entering twelve possible date ranges and output the data all in one query. I could accomplish that by writing 12 queries and attaching each one to a start and end box on a form and then doing a Union Query to obtain one result. I think this might be the long way to accomplish this.
Is there a better way to get the result on one query for multiple Start and end Date Ranges?
Thanks
Joe:D
I'm a couple of years removed from Access and shaking off the rust. I hope someone can help with something that may be obvious but I'm missing.
I'm simply looking to pass the begin and end dates to a query driving reports. The calendar form includes unbound text boxes, txtBeginDate and txtEndDate. My code populates the text boxes correctly; the user clicks on the calendar date, clicks the calendar day, then the Begin (or End) Date control, and each populates the respective textbox.
But when I run the query or report, I'm prompted for the parameters. This is what I have in the query's Date field criteria:
Between [Forms]![frm_Calendar]![txtBeginDate] And [Forms]![frm_Calendar]![txtEndDate]
I'm just drawing blank on what I did several years ago to make this work. If anyone can help, I'm most appreciative.
I'm booking in my hotel booking system the start and enddate of renting a room.
Example: Room 12 is booked from (startdate) 16/05/2013 till (enddate) 19/05/2013.
Now i need a query where i can see all the dates between start and enddate.
Like:
Room 12 16/05/2013
Room 12 17/05/2013
Room 12 18/05/2013
Room 12 19/05/2013
This between function i really need.
I've restructured my 'application' to have one table and a lot of query/forms. In light of not figuring out the combo box situation I altered the requirements and what I needed thinking I may have an easier go of it, but alas not exactly my experience. I have 5 reports that I want to filter them by week(start of the week). I have a function which can turn any regular date entered to the start day of the week(monday). I thought my best way about this would be to fill a combo box with all the accepted dates through a separate table's column.
Is there a way to pop a dialog box when the user clicks to generate the report that will prompt them to choose a week then run that criteria against the report and only bring back that date?
I have a db tracking vacation times for staff. One of the fields tracks a members vacation start and end dates. I need a way to pull a report to see who is on vacation based on Date() (today).
For example:
A record for John Doe has him start vacation 08/19/2014 and end vacation on 8/28/2014. If I wanted a report that shows who is on vacation today, 08/25/2014, using the date() function), how would I do this?
I have a table that has the following:
ID
Program Year
Program
Start Date
Midpoint Date
Internship Date
End Date
I have successfully created queries to create reports showing all Start Dates by Month no matter what program and similar reports for all the other date queries. What I need it to do is list everything happening within a month and sort them by category. How do I do that? I've attached the database so you can see my queries as well as the main switchboard reports associated.
In my table I have the following 4 fields with the associated date field:
Bronze: 11/1/2013
Silver: 5/1/2014
Gold: 11/1/2014
Platinum: 5/1/2015
I am trying to calculate a value based on comparing the current date to the dates in these fields. I am using the below formula. However, using 6/27/2013 as the current date, my formula keeps resulting in "Bronze" when it should result in "Standard" Am I doing something wrong?
=IIf(Date()<[Bronze],"Standard",IIf((Date()>=[Bronze]) And (Date()<[Silver]),"Bronze",IIf(Date()>=[Silver] And Date()<[Gold],"Silver",IIf(Date()>=[Gold] And Date()<[Platinum],"Gold","Platinum"))))
I have a report that shows a Start Date and an End Date. I also have a control that shows a date which I'm wanting to check. I tried the conditional formatting to create something that says When this date is greater than start date and less than end date I want the cell to be Red.
>[Start Date] And <[End Date]
I need to build an expression: calculate the total number of years worked given the start date and end date.
I put this as the expression in Field: Years Worked: [End Date]-[Start Date]
However, I keep getting #Error in datasheet view.
Can someone help? thank you.
Any way to have a form with Dates as column headers to update a table where the dates are stored in rows???
The table set up is like this:
tblOpHdr
DiaryID (PK) - OpDate (Date)
tblOpDetail
DiaryID (FK) - CostCode - MachineNumber - MachineHours - etc
I'm just wondering if there's any way I can do this with a datasheet or a crosstab type setup?
It's Access 2010.
I have built a query to calculate the expiry dates of training courses but I am trying to input a criteria so that only dates within 90 days of todays date show. I am using Date()<90 but it doesn't return the correct information. What the criteria should be for this?
View 1 Replies View RelatedI have a table of records, which has within it two date fields (effectively, a 'start' and 'end' date for that particular record)
I now need to create a query to perform a calculation for each date between the 'start' date and the 'end' date
So the first step (as I see it anyway) is to try to create a query which will give me each date between the two reference dates, in the hope that I can then JOIN that onto another query to perform the necessary calculation for each of the returned dates.
Is there a way to do this?
So basically, if for a particular record, the 'start' date is 01-Apr-2015 and the 'end' date is 09-Apr-2015, can I produce a dataset of 9 records as follows :01-Apr-2015
02-Apr-2015
03-Apr-2015
04-Apr-2015
05-Apr-2015
06-Apr-2015
07-Apr-2015
08-Apr-2015
09-Apr-2015
(The *obvious* solution would be to create a separate table of dates, from which I could just SELECT DISTINCT <Date> Between #04/01/2015# And #04/09/2015# - but that seems like a dreadful waste of space, if that table is only required to generate the above? And it would have to cover all possible options; so it would either have to be massive, and contain every possible date - ever! - or maintained, adding new dates as necessary when they are required. Seems horribly inefficient!)
Is it possible to just select each date between the two reference dates? Or can you only query something which exists somewhere in a table?
Hiya-
I have a database with 5000 entries, corresponding to about 10 entries for about 500 people. Each of the entries is dated, and I need to calculate the time intervals between each person's sequential entries in the table.
One way of doing this is to create another column that contains the date of the previous entry. I can then use DateDiff to subtract one date from the other and give me the difference in days.
This approach falls down if I then work with only a subset of the entries - I would have to re-enter the previous entry dates as the time intervals would have changed.
What I really need is a way of subtracting the date from the date in the cell directly above it. Will Access let me do this, or is there a better way?
Many thanks, Jules.
I have two tables with dates. Between (!) every two following dates in table1, I want to know the number of dates in table2. How do I write an SQL query for this? The tables I have are up to a few hundred records in table 1 and a few thousand records in table2. So to prevent that this takes hours I need a fast query.
To explain the query I need, for example:
table1
01/01/2014
15/01/2014
17/01/2014
30/01/2014
table2
01/01/2014
02/01/2014
05/01/2014
17/01/2014
18/01/2014
20/01/2014
21/01/2014
25/01/2014
So the answer of the query would be 2,0,4.
Explanation:
Between 01/01/2014 and 15/01/2014 in table 1 there are 2 dates in table2 (01/01/2014 is not included between the dates)
Between 15/01/2014 and 17/01/2014 in table 1 there are 0 dates in table 2
Between 17/01/2014 and 30/01/2014 in table 1 there are 4 dates in table 2
I have a master table which shows all transactions per record (person) over a financial year.
Each record person has a seperate package period over which their spend needs to be measured. Therefore although I have all their transactions for the year, I only want to sum their transactions between their given [start date] and [end date] which are in columns.
I need to be able to create a field which sums all expenditure per record between the start and end dates
Name Start Date End Date Invoice Date Amount
Matt 15/5/11 15/9/11 1/11/11 £100
Matt 15/5/11 15/9/11 7/7/11 £200
Matt 15/5/11 15/9/11 12/12/11 £200
In this case I would only want to sum 7/7/11 as this is between the start and end dates
I want to write something like sumif([Invoice Date] is between [start date] and [end date] - not sure where or how exactly
(The start date and end date will always be the same per person)
Is this possible in access?
I have two tables: -
1) Sales data
2) Claims data
I want to anaylse Premium (contained in the Sales Data Table) against Claims (contained in the Claims Data Table). The result I want to achieve is to show a loss ratio (Premium / Claims as a %). I need to show this on a per policy basis (each Table has a Policy Number Column).
Im new to Access and do not know how to go about this.
Hi,
I have imported data from an ERP system into an Access table. This big table contains information about invoices processed last month. 2 of the columns are currency code and payment batch code.
Actually, there are rules that accountants should follow, but they can make errors. We would like to find those error using this Access database.
One rule is that only predefined payment batch codes should connect to a
currency code.
My idea was to create another table, where controllers are able to type in these rules like
EUR CIE
USD CIU
HUF BKH
This table has only 2 columns: currency code and payment batch code and no primary key has been defined.
The 2 tables were joined with the currency code and a query printed only those transactions where the payment batch code from the big table <> the payment batch code from the new table. This shows where accountants made an error.
This is the query:
SELECT [475 Master].*
FROM Tbl_Pmt_Btc INNER JOIN [475 Master] ON Tbl_Pmt_Btc.Cur_Code2 = [475 Master].Currency
WHERE ((([475 Master].Pmt)<>[Tbl_Pmt_Btc].[Pmt_Btc_Code]));
475 Master is the big table, Tbl_Pmt_Btc is the new table that can be modified by the controller.
This worked until more than one payment batch code were assigned to a currency code.
EUR CIE
EUR CIU
It seems that Access can use only one of them.
Can you please advise what to do in order that Access takes both rows into
account and the query prints those transactions booked in EUR where the payment batch code are neither CIE nor CIU.
Is there a simple solution without any programming?
Thanks,
Peter
Hello - I am new to Access and don't know VB.
I am trying to compare 2 tables that each contain the following information:
Fields:
Document Number
Date
Changes (Amendments, etc.)
I would like to see the following on a report:
A - If a document number is on Table 2, but not on Table 1, show these on a "missing documents" report.
B - If a document number exists on both reports, however the dates do not match. Example: Document 123 is on Table 1 with a date of 1/1/1999 in the date field. Table 2 contains the same document in the document number field, however the date field contains 2/15/2005. SHow these on a "Date Differences" report.
C - If a document matches on number and date, however the changes field does not match.
Ultimately, I would like to add other fields to compare as well.
Hope this makes sense to someone out there!
Thanks!
If I have a date column and another column with another consistant date, Can I make a criteria to compare one to the other. Ex:
END_DATE Today's_DATE
06 Feb 05 15 Jun 06
12 Feb 05 15 Jun 06
01 Jan 06 15 Jun 06
26 Mar 06 15 Jun 06
18 Aug 06 15 Jun 06
28 Dec 06 15 Jun 06
Can I make a criteria that will only show the END_DATE data that is before Today's DATE? Does it need to be a new column or can I place it in the criteria of one of these column.