Compile Error - Method Or Data Member Not Found

Jun 8, 2012

Error: Compile error: Method or data member not found when create Update button

View Replies


ADVERTISEMENT

Method Or Data Member Not Found Error

Sep 27, 2013

I'm a newbie trying to upgrade a 2003 database to 2010. When I compile this database an error pops up saying "Method or data member not found". This is the code below:

Private Sub CBPrintReq_Click()
On Error GoTo SendPrintError
Dim NewID As String, Notice As String, Temp
Dim CRLF As String * 3
CRLF = Chr$(10) + Chr$(13)
Notice = ""

[Code] ....

View 1 Replies View Related

Forms :: Error (Method Or Data Member Not Found) On Requery

Sep 19, 2014

I have a form (frmTimecardsDataEntry3*) that needs to requery combo boxes to narrow down the selections offered in the dropdown of each combo box.

It is a data entry form. I.e. Dataentry is set to yes.

The ClientName combo box has an after update event which requeries the matter combo box, so that the MatterName combo box dropdown only shows the matters relating to that client. This works just fine.

The MatterName combo box has an after update event which requeries the Rate combo box so that in the Rate combo box dropdown only the hourly charge rates relating to that matter are shown. That works too. So far so good.

I then tried adding another after update event to the MatterName combo box, so that another combo box, Application, was requeried too, so with the Private Sub it looked like:

Rate.Requery
Application.Requery

But this resulted in the error in the title to this post and the debugger highlighted in red the word Requery in the phrase Application.Requery.

I thought maybe Access does not allow two requeries resulting from one after update event, so instead I took Application.Requery out and placed it as an after update event in another combo box which did not have any other after update events to run.

However, this resulted in the same error.So the error appears to have something to do with trying to requery the Application combo box but I cannot see what is causing the error.

The Application combo box SQL is:

SELECT Applications.ApplicationID, [ApplicationDate] & " " & [ApplicationName] AS ApplicationDisplay, Applications.ApplicationDate, Applications.ApplicationName, Applications.MatterName
FROM Applications
WHERE (((Applications.MatterName)=[Forms]![frmTimecardsDataEntry3*]![MatterName]))
ORDER BY Applications.ApplicationDate, Applications.ApplicationName;

This is the same arrangement of SQL that I am using on the other requeried combo boxes that work. When I take the WHERE statement out of the Application SQL and run it the query returns all of the applications.

I am not sure what the error code is trying to tell me about the attempt to requery the Application combo box.

I have a yes/no box in the form and when the firm is first opened it has a small square dot in it, but as soon as any data is entered in the form the dot clears and leaves the usual empty tick box that you would expect to see.

Also, another possible symptom is that I had another version of this form previously working quite well except that when I did several data entries all at once, so I had several forms filled in with different data (before refreshing and thus entering the data in the table), when I scrolled between the forms I kept losing the MatterName data when I scrolled back, and then when I re-entered the ClientName data the correct MatterName data returned without me having to use the dropdown to select it.

I have had an earlier simpler version of this form working for some time, with ClientName requerying MatterName and MatterName requerying Rate, and I am using the same SQL structures in the new form but getting the error in the title to this post and the other isues just described.

View 2 Replies View Related

'Method Or Data Member Not Found' Please Help@! Am Desperate!!!

Nov 27, 2005

Hi,

Trying to run a template on a new computer.. it works on other computers, but in this case it gives me this compile error.. kind of strange.

It comes up here-

End With
Selection.PasteAndFormat (wdPasteDefault)
Selection.MoveUp Unit:=wdParagraph, Count:=1, Extend:=wdExtend

(.PasteAndFormat) gets highlighted... I'm not that computer savvy... please help!!

Thanks heaps

Ross

View 7 Replies View Related

Modules & VBA :: Method Or Data Member Not Found

Jan 19, 2015

i have the following code in a function but when i want to compile it i have the following code will be blue i have error in this line:

.NamedParameters = True

the error message is this :

method or data member not found

my code is as following:

Function Get_Bearbeiter_Detail(ByVal vBearbeiter_Code As String, Optional ByRef vBearbeiter_Name As String, Optional ByRef vReadOnly_Flag As Boolean, Optional ByRef vAnalyser_Flag As Boolean, Optional ByRef vAdmin_Flag As Boolean) As Boolean
On Error GoTo Err
DoCmd.Hourglass True
Dim rst As ADODB.Recordset

[code].....

View 1 Replies View Related

Forms :: Method Or Data Member Not Found?

Jun 11, 2013

I am receiving the Method or data member not found error message when I attempt to add a new record in form view. I have been working in an old 2002-2003 version of Access until last week when it was converted to 2007. The old version allowed for additions just fine but now after the conversion something is wrong. The code is below. I underlined the line throwing the error message (FindFirst). Code is not my strong suit.

'Open form to new record
gstrCallingForm = Me.Name
strDocName = "frmNewApplicant"

[Code].....

View 14 Replies View Related

Modules & VBA :: Compare Database - Method Or Data Member Not Found

Mar 12, 2014

Compile error: Method or data member not found

Code:
Option Compare Database
Option Explicit
Dim intItems As Integer
Dim strName() As String, datBirthDate() As Date, intAge() As Integer

Private Sub Form_Load()
intItems = Val(InputBox("How many names do you have?", "Name List"))

[Code] .....

View 8 Replies View Related

Forms :: Method Or Data Member Not Found When Inserting Values To A Table

May 13, 2013

I am getting method of data member not found for the following code when inserting values to a table. Form has three frames. Add/Insert is on OnClick Event.

MsgBox "First Value, " & Me.txt_FSNo
CurrentDb.Execute "INSERT INTO BackchargeLog (BC_FSNo, BC_FContract, BC_FPurchaseOrder, BC_FProjectArea, " & _
" BC_FTitle, BC_FDetailDescription, BC_FSupplierToBeCharged, BC_FSupToBeChargedNumber, BC_FSTBCContactName, BC_FSTBCContactNumber, " & _
" BC_FSTBCContactEmail, BC_FIncidentReportedDate, BC_FInitiatedDate, BC_FEstimateAvailable,

[Code] .....

View 7 Replies View Related

Please Help Error Message "Method Or Member Not Found"

Aug 11, 2006

I have two similar forms with similar controls. I copy 20 pieces of controls to another forms certain tab.
When I run code to update database table using the control box value, access can’t find the control box. I got this errors message.

Do you guys know why I got this error?

Thanks

View 1 Replies View Related

Filter Subform-Data Member Not Found Error!?

May 18, 2006

Hi all, I’m trying to filter the records a subform shows based on the employee number (in a combo box) that the user selects in the main form. At the moment im getting the following message when I select an employee number in the combo box: “Compile error, method or data member not found”:confused:

Ive searched the forums on here and tried to make use of the information other people have posted but im still having trouble getting this to work

Below is the code I have on the combo box of the main form:

Private Sub Cbo_Emp_Filter_AfterUpdate()
Dim strSQl As String

strSQl = " Select * from DATA-EMPLOYEE_MASTER where DATA-EMPLOYEE_MASTER.EMPLOYEE_NUMBER=" & Form![SCREEN-ABSENCE_TRACKING_MAIN]![EMPLOYEE_NUMBER]

Me.SUBFORM_ABSENCE_TRACKING.RecordSource = strSQl
Me.SUBFORM_ABSENCE_TRACKING.Requery
End Sub

Ive also posted the database if any one is willing to have a look for me (ive removed irrelevant tables/forms/reports). Im using access 97

Thanks

Jim

View 3 Replies View Related

Modules & VBA :: Error 461 Method Not Found On Outlook Folder Object

Sep 15, 2014

I have a strange behaviour on a module which reference to Microsoft Outlook Object Library 14.0. The below code got an error 461 on the folderoutlook.display code,i.e. the method is not found. The funny thing is that the same code gives no problem in another accdb file, exactly same code with same reference on same machine.

Set appOutlook = GetObject(, "Outlook.Application")
Set appOutlook = New Outlook.Application
Set namespaceOutlook = appOutlook.GetNamespace("MAPI")
Dim folderOutlook As Folder
Set folderOutlook = namespaceOutlook.GetDefaultFolder(olFolderInbox)
FolderOutlook.Display

View 4 Replies View Related

Reports :: Add DLookup To Subreport - Member Not Found

Jul 3, 2014

I need to add a DLookup to my Subreport.

For my text box, Text255, on the Subreport I have tried:

Code:
Private Sub Report_Load()
Me.Text255 = DLookup("[Along_line_spacing_%pass]", "Performance_Requirements_Defaults_Table")

The table Performance_Requirements_Defaults_Table has just one record for lookup. No value is returned when I run the main report.

I found this: [URL] .....

And tried adding the lookup code to the main report instead of the Subreport, but I think I am having trouble understanding what they mean here: "Subform1 is the name of the subform CONTROL on mainform" Are they inferring that I need to have a text box on the mainform as well?

I tried using this Me!Subform1.Form!ControlName like this:

Code:
Me.Text255.QC_Along_Line_Processing_Subreport!Text255 = DLookup("[Along_line_spacing_%pass]", "Performance_Requirements_Defaults_Table")

I know this is not correct, and I have tried several variations, but I am totally stumped. Everything I have tried with the lookup code in the main report returns "Member Not Found" and Text255 is highlighted. I feel like this should not be such a big problem.

View 1 Replies View Related

Modules & VBA :: Data Source Name Not Found Error

Mar 31, 2015

i recieved error on the following connection string in the combo box change event code as follows,

Private Sub LotNo_Change()
Dim conn As New ADODB.Connection
Dim sConnString As String

[Code]....

View 6 Replies View Related

Modules & VBA :: Error Message When No Data Found In Query?

Jul 18, 2013

I have a search query that searches for different results based on 3 criterior. I have set up a form so that the user can input the text into the form and then once the Submit button (that i created) is clicked the query table will be shown.

My question is:

Is it possible to have an error message box appear when i click submit and no data is returned by the search query?

I'm hoping for the message box to say "No corresponding records to your search criteria. Do you want to try again?"

Then the options given in the message box are Yes (where they should be taken back to the search form) and No (Where they are taken to another form).

View 6 Replies View Related

Compile Error

Jan 11, 2006

I just recieved a access project from a client, apparantly it works fine on their machine. I FTPed it to my machine. Both are winXP.

Most of the app works fine except when I try to bring up one form. I get this error.

Compile Error
Can't find Project or Library.

This is written in access 2000 and that is what I am running it on. I've checked windows update, my computer is up to date. That includes Office update.

I tried running this on a second box that I have, a win2000 server I get the same error.

It apprears something is not getting transfered, any Ideas?????

Thanks for the help.:)

View 1 Replies View Related

Compile Error

Mar 6, 2005

I need some help guys... i have created a code ... in which the user is able to create users passwords and etc....


The problem seems to be with one line of the code... which is

Dim db As DAO.Database

the error says User defined type not defined....its a compile error...
Can anyone help me to solve this???
Thanx guyz

View 1 Replies View Related

Compile Error

Nov 25, 2004

I tried to declare a variable to be type Database and when I compile the program it gives me an error Compile error "Use Defined type not defined"
this is the code that I have written:

Public Sub NewX()

Dim mydb As database ******** here is were is giving me the error, I tried to declare this on several places but it does the same error**********
Dim myrecord As Recordset

Set mydb = CurrentDb
Set myrecord = mydb.openrecordset("log", dbopendynaset)

the rest of the code continues.......
End Sub

Any help will be appreciated, I am trying to save the information on the database by clicking a coomand button .

Thanks.

Zurdo

View 1 Replies View Related

Compile Error Help

Apr 28, 2005

I used "Option Explicit" at the beginning of a module. When I compiled the code, I received a Compile error that indicated the Set dbs = CurrentDb is not defined.

How do I define the "dbs =" variable???

Any help is appreciated.

Thanks

View 4 Replies View Related

Compile Of Hidden Files Error

Aug 1, 2006

When trying to open an Access database on the server, an error message appears - "Compile of hidden files error", followed then by a run-time error. There is no problem accessing the the server and opening the database from another PC? Does anyone have any ideas what could be causing this. Backups to CD have started failing at the same time.

View 3 Replies View Related

Compile Error After Security Applied

Jun 13, 2006

I have an unbound list box that updates the data displayed on the form when a selection is made from the list.

Private Sub List13_AfterUpdate()
' Find the record that matches the control.
Dim R As Recordset
Set R = Me.RecordsetClone
R.FindFirst "[HospitalID] = & '" & Me![List13] & _
"'"
Me.Bookmark = R.Bookmark
Me![List13].Requery
End Sub

I am having problems with this no longer working once I import the database objects into a secured database. I am encountering an error "Compile Error: Method or data member not found" with reference to the list box in the "findfirst" statement.
I have tried this many times before and after the security and the results are consistent.
I was otherwise ready to go with this new database. Any insight would be appreciated as always.
Thanks.

View 10 Replies View Related

Modules & VBA :: DLookup Compile Error

Jun 23, 2014

why I am getting "Compile Error: Expected: =" here:

Code:
Private Sub Form_Load()
MeText9 = DLookup("[Along_line_spacing]", "Performance_Requirements_Defaults_Table")

when this:

Code:
Private Sub Form_Load()
Me.charttypestatic = DLookup("[Static_Chart_Type]", "Project_Defaults")

works??The "Performance_Requirements_Defaults_Table" table is linked, the "Project_Defaults" table is not.

View 7 Replies View Related

Compile Error - Argument Not Optional

Jul 30, 2015

Windows XP
Access 2007

I have followed Martin Green's steps (fontstuff) for creating an audit trail and am getting a compile error when I check my code.

This is my code and the error highlights 'Call AuditChanges' as the problem.

Private Sub Form_BeforeUpdate(Cancel As Integer)
If Not Me.NewRecord Then
Call AuditChanges("ImprovementID")
End Sub

View 5 Replies View Related

Compile Error: Can't Find Project Or Library

Aug 30, 2005

I try to use the function chr() and left() in Access2000. but it got "Complile error: Can't find project or library".

View 1 Replies View Related

Modules & VBA :: Compile Error When Selecting A Reference

Dec 15, 2014

whatever Microsoft office program is open. The problem i get is that when i add the reference Microsoft outlook 14.0 object library i get a compile error "ByRef argument type mismatch".

Code:

Option Compare Database
Public Enum OfficeAppName
Outlook = 1
PowerPoint = 2
excel = 3
Word = 4
Publisher = 5
Access = 6
End Enum

[code]....

View 4 Replies View Related

Forms :: Compile Error Opening Form

Jan 29, 2014

A receive a compile error when an OpenForm macro action is executed. The error message is: The form you referenced may be closed or may not exist in the database. Microsoft Access may have encountered a compile error in a Visual Basic module for the form.

How do I fix this compile error ?

View 10 Replies View Related

Modules & VBA :: Compile Error - Invalid Qualifier

Oct 13, 2014

I have the code below and am trying to have a a form allow Text Box to become visible based on selected items from a List box.

Private Sub specific_opt_Click()
Dim users As Control
Dim ctrler As String
Dim xx As Long
If Me.specific_opt = True Then GoTo 169
Exit Sub

[code]...

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved