I have a query which select the records who have a certain criteria.
The result is something like this.
A 0012345
A 0032432
Note that the records that have this criteria will be smaller or equal than 2.
I want the query to give me this answer instead.
A0012345, A 0032343
(in the same field that is).
Is this possible, if so can someone help me. My email address is russcami@yahoo.com
Thanks
I am trying to generate a simple report that can be imported to excel for analysis. Currently the database documents failure causes associated with a repair. I need a "Report" that does not duplicate the failed items in the event there is more than one cause associated with the failure. some repaired items may have up to 3 causes of failure. What I would like to do is have the query show one record instead of three records (for the cases were three causes of failure were identified for a repair)
Current query format
Code:
facilityID Failure Cause
1 Electrical Surge
1 Mechanical Wear
1 Corrosion
2 ......
2 ......
.... ......
Desired query format
Code:
FacilityID Failure Cause(s)
1 Electrical surge, Mechanical wear, Corrosion
2 .....
.... .....
I was reading about a SQL transpose call but I do not need all fields transposed (only the failure causes transposed and concatenated into one field).
Test database attached with a query that shows the data I want to transform into the desired format.
I have a query that selects the "Active" records for three different selections, A, B or C.. There may be 1, 2 or 3 results for a particular selection. That is Selection A may have one result or active records, but Selection B may have three results.
I want to use data from the query to populate a field on a form. For example, if the results for Selection A, having one "Active" record would be RecordAData. But for Selection B with three "Active" records the result would be RecordBData & " " & RecordBData2 & " " & RecordBData3
My query is:
SELECT tblSomething.ID, tblSomething.D1, tblSomething.D2, tblSomething.D3, tblSomething.D4, tblSomething.D5, tblSomething.D6, [D3] & " " & [D4] & " " & [D5] & "-" & [D6] & " " & "SomeText" AS Header
FROM tblSomething
WHERE (((tblSomething.D1)=Forms!frmSomethingHeaders!D1) And ((tblSomething.D2)=True));
The concatenation in the query is labeled "Header". I want to be able to Concatenate the "Header" which in itself is a concatenation in the query.
I thought that this might be a looping through the query results, but I cannot figure out how to do it. But then, that is only my uneducated guess.
To anyone who can help,
I have created a function that loops through an amount of records and concatenates them into a single comma-separated string. What I would like to do is concatente the values into a list. Instead of:
value1, value2, value3
I would like to see
value1
value2
value3
This needs to be in a single record only. The code I am using is:
----------------------------
while not rec.eof
string = string & ", "
rec.movenext
wend
string=left(string,len(string)-2)
--------------------------------
Thanks for all your help. I have tried to insert char(20), but this only seems to work in Excel. Access gives me invalid char symbol.
A third-party application I use exports data with 3 header rows. I usually have to go into Excel and concatenate the rows into a single header row, then export the file to Access to apply queries. I want to minimize the steps in this process, so I'm wondering if it's possible to do this concatenation in Access (with or without VBA).
View 13 Replies View RelatedI have a Query, which is running on 2 tables and when I run the query I am getting the results like this.
Name----------Position
Rock----------1
Rock----------2
I want the Results like
Name----------Position----------Position
Rock----------1 ---------- 2
Is there any way to do this.
I use following function to concatenate data from multiple rows into a single row/field. It puts a comma ',' after each concatenate. What I would like it to do more is to put 'and' instead of comma between the last two concatenated words. For example: Now it gives me Value 1 but I want to get Value 2.
Value 1:
FormRegNo CombinedParticipants
DC-190 Political parties, CSOs, community residents
Value 2:
FormRegNo CombinedParticipants
DC-190 Political parties, CSOs and community residents
Function:
Option Compare Database
Option Explicit
Public Function ConcatField(strSQL As String) As String
Dim dbs As Database
Dim rst As DAO.Recordset
Dim strConcat As String
[Code] ....
In Access 2013 I have a query that join two tables, Conduminium Owners to their possetions (fractions of conduminium).
Owners.OwnOwners.Vote SumOfTblFracPerc
O; P................................No............... .9,54
F....................................Yes.......... ......5,48
L; Q................................Yes.............. ..7,13
M; U...............................Yes............... .7,86
H...................................Yes........... .....5,71
D; R...............................Abstention......7, 78
etc...
This query is grouping and summing, and I want put the results in a form and see it grouping the fractions in lines like this:
"These were the votes of the owners of fractions:
O;P, voted No = 9,54
F, L;Q, M;U, H, G;W, C, N, I, voted Yes = 37,72
D; R - voted Abstention = 7,78
How can I do it?
:mad: :mad:
Hi folks,
I wonder how can I list all the column names for a given table using a single query? I know how to do it in SQL using system tables, but no idea how to do that in Access.
Thanks.
i'm using Master and Detail table. Master table i have TaskId, ResId where ResId is mapped to Detail table which contains resource working on the task. i want to generate a query where for each task i want to display resource id in single column like below.
Task Id Resource Id
1 222,233,244,255
Do i need to use recursive query or any other method to get results like above.
I have a query that displays this
Column1 Column 2 Column 3 Column 4
TripTitleA TravelerA N/A N/A
TripTItleB TravelerB N/A N/A
TripTitleC TravelerC TravelerD TravelerE
TripTitleC TravelerD TravelerC TravelerE
TripTItleC TravelerE TravelerC TravelerD
TripTitleD TravelerF N/A N/A
I want to filter Column1 to have no duplicates so it looks like this
Column1 Column 2 Column 3 Column 4
TripTitleA TravelerA N/A N/A
TripTItleB TravelerB N/A N/A
TripTitleC TravelerC TravelerD TravelerE
TripTitleD TravelerF N/A N/A
Is this possible?
How do I select the first column of a multi-column list box (called "List1") for a query.
A single column list box works fine.
Code:
SELECT Tble_Employee.Emp_No, [forms]![attendee_form]![list1] AS SelectedCourse
FROM Tble_Employee;
Hi,
I have a combo box which is populated by a table with the fields ID, First Name and Surname. What I want to do is display the first name and surname concatenated and hide the ID column, but populate the field with the ID number.
Is this possible?
I have a datase that has the following fields.
Name
Comment1
Comment2
I have about 36 names and each of those names appears anywhere from 2 7 times each. Each name entry has a comment1 and a comment2.What I would like to do is create a form that allows me to choosea name and the display the comments 1 and comments 2 in text boxes.
I have made the form to allow me to choose a name and it shows one of the comment1 and one of teh comment2 in the adjacent text boxes as planned but, I want all the comment1s for Bob to show in the text box for comment1 and all of the comment2s for Bob to show in the Comment2 text box.I believe I need to concatenate the results in the comment1 and comment2 boxes, but I do not know where or how I would do that.
I would like to be able to take 1 column from 2 different queries and put them into 2 columns in a 3rd query.
View 6 Replies View RelatedI have a large database which runs various reports however i am struggling with the last bit to get this report working.
Under each "Works Order" is a set of scrap which is associated with this batch. Instead of rows of data i would like to add all the "reason for scrap" to a single text box for each works order:
i.e. WO: 259953 | Scrap: Sub contract inner open; Untraceable short; short to plane etc etc.
I have attached an image in its current format.
Hey buddays,
I'm not sure what the definition of this type of concatenation is, so I'm having trouble searching for it.
I have three tables - one is tblNames (with ID, first_name, last_name) with 25 records, and tblStates (with StateID, state_name, state_abbrev) with 50 records, and the requisite join table between them - tblNamesState (with autonumber and the two FKs), because some of the folks in tblNames can have locations in multiple states. Good enough.
But now it's output-to-spreadsheet time, and I want to run a query that will give me 25 records, and concatenate the location records in a single row. An example would be:
first_name | last_name | state_name
John | Johnson | AL, AK, TX, FL
Eddie | Edwards | MA, TX, FL
Sally | Smith | VT, WA, CA, TX
How do I concatenate records from a single column?
I am trying to create a form with a button attached to each record that would allow the user to click the button and it would automatically open outlook and fill in the TO:, SUBJECT: and BODY: fields. Here is the code that I currently have:
Code:
Private Sub Command33_Click()
Dim strEmail As String
Dim strMsg As String
Dim oLook As Object
Dim oMail As Object
Set oLook = CreateObject("Outlook.Application")
Set oMail = oLook.CreateItem(0)
[code]...
There are two issues I keep running into:
1. This code opens outlook and populates all of the fields but pastes the email incorrectly. Instead of pasting just the email (email@email.com) it pastes the html tags as well (email@email.com#mailto:email@email.com#) which means that the user would have to delete everything between the #'s in order to send the email every time.
2. I currently have the email BODY pulling from a table but this obviously limits what I can do. I would like to simply encode the BODY within the VBA code. The setup I am looking for is:
one paragraph
a blank line
a hyperlink to a website
a blank line
another paragraph
Im making a database about past bid results. In one table i have a list of bidders and which place they came in (along with some other information). I have 20 positions (1st place, second place and so on...), so i made 20 queries that search through the table for my company's name so we can see how many times we came in first, second, third and so on. Now i would like to bring the number of records in each query to a single form. I tried making another query to using the count feature on the other 20 queries but it keeps returning 0 as the number of results per query. But when i open each query up there are obvisouly more that 0 results in each. Is there a way i can bring up the number of results per query all on one form?
Thank you
Dan
I want to create the date from multiple columns to single colums. Just for example
table 1 (local purchase)
Itemname Date
Apple 12/01/2013
Mango 13/01/2013
Table 2 (Import purchase)
Item Name DAte
Apple 12/04/2013
Mango 08/06/2013
Now i want to make one query, which can you the date as follows when we give criteria = apple
Item Name Date purchase mode
Apple 12/01/2013 local
Apple 12/04/2013 Import
Means two dates from different table into one query column... One way in my mind to make one table for both tables.
Is there any way I can use data in the row as a column header ? I only have 1 row of data which i want to use as a header to I can link it to other tables/queries.
(Access 2007 query)
I cannot seem to find a way to upload several rows of data to one column in Access!I have about 9 columns already in the table which have 900 rows each. These include names, numbers, address etc.I was asked to add a column on next to the 9 columns with corresponding User ID such as 0093457FX (Which I really do not want to add manually).Every time I try to upload an excel file the data either goes below the current data from the 9 columns on the new column and does not match the current data set, or it does not show up at all.
View 4 Replies View RelatedHELP :confused:
Hi,
I need to copy 5 columns in an Access table into a single column in Excel. How can I do this?
Pictures To Help explain below:
http://uploads.savefile.com/users/uploads/1_154.jpg 261kb
http://uploads.savefile.com/users/uploads/2_154.jpg 192kb
I have a table that has two columns "Nationality" and "Gender". I wanted to run a query that will Group the nationality and then split the gender column into two columns and after that it will count both gender columns for each nationality. When I posted this question in "Reports" section I got the suggestion to use the SELECT COUNT in SQL. It worked but only for nationality. I couldn't get it work for the Gender column. I searched alot and the only thing I got was the SQL function to split data from one column into two but that also didn't serve the purpose (check the link to see why: [URL]) At last, I went on to create a cross tab query. Selected Nationality as Row header, Gender as Column header and Customer ID as calculation point. And there I got the result I needed. The SQL Code looks like this:
Code:
TRANSFORM Count(Register.[Customer ID]) AS [CountOfCustomer ID]
SELECT Register.National, Count(Register.[Customer ID]) AS [Total Of Customer ID]
FROM Register
GROUP BY Register.National
PIVOT Register.P_Gender;
Crosstab query did the trick..
I've created a access database containing multiple tables, theres one main table that will contain all the data compiled.
I then have other tables that contain some matching data but with an additonal column filled in,
I want to be able to pull the data from these other tables into the main table and compile it including merging some data into a single feild.
Effectively this is what the inputs will be:
Code:
Table 1
Ident Number Solution TRN
T0941A1 SLN019149 EFE0008
T0941B1 SLN019149 EFE0008
T0941C1 SLN019149 EFE0008
Code:
Table 2
Ident Number Solution TRN
T0941A1 SLN019149 EFE0167
T0941B1 SLN019149 EFE0167
T0941C1 SLN019149 EFE0167
Code:
Table 3
Ident Number Solution TRN
T0941A1 SLN019149 EFE0188
T0941B1 SLN019149 EFE0188
T0941C1 SLN019149 EFE0188
Then the main table i want to compile the data like this:
Code:
Table 4
Ident Number Solution TRN
T0941A1 SLN019149 EFE0008,TRN0167,EFE0188
T0941B1 SLN019149 EFE0008,TRN0167,EFE0188
T0941C1 SLN019149 EFE0008,TRN0167,EFE0188
i want it to show as 1 line item and compile the TRN numbers into a single feild per row rather than having duplicates.
I have a data base with names, email IDs, phone numbers of 5 types(example quality, security, IT,finance etc) of person from ten different project teams. I created a basic form for the end user to enter values and created fields for each of the person's name, email ID etc based on the personal type( liek quality, IT, finance etc) on each team. The background table contains records of almost 200 people now.
All of these people will be trained for one task and some will be trained for multiple tasks. I know how to make the combo box allow multiple values/selections but, i cannot list out all 200 personal names in the combobox's rowsource/value list. Is it possible to combine all different name fields and list out all personal(of one team), so that the end user can just select multiple names for that team who have been trained and so on. i need to set the rowsource of the combobox to the values of all personal from one team so the team leader can just go select who has been trained and who has not.