Hi All
Is it possible for a command button to appear on a form only if a certain condition is fulfilled ? Otherwise it is invisible. The condition would be that one of the field entries on the form must equal a specific value.
How might I make that happen ?? (I'm a beginner !)
NoVoiceLeft
I have two table data base (Patient Info) + (Referral Info) with one to many relationship.I devised a form to display patients information and their mental health diagnosis. On my referral form (subform) I have I have list box facility with various possible diagnosis. What I want to do is ... if the user selected "Dementia" from the look up/list box...
I want to display a Butterfly next to the patient's name (Main form)
(1) I don't want the picture to be in C drive rather I want the picture to be part of the database
(2) How can I put the conditional display (if Diagnosis is = "dementia" then Butterfly)
I'm using Access 2010. I set up conditional formatting in some areas of my report. They're very simple like if a cell is between 0 and .4, then the background color of the field is red. They work just fine...when I click on the field. I don't remember ever running into this issue in the past. I've been reading potential solutions on the web, but haven't found a way to make the conditional formatting rules kick in when the report is loaded.
View 5 Replies View RelatedI am trying to make a form that will append when you click on the button I have made, but i want to make it so that the form wont let you append the table until you have filled a few "Required" fields.
I am new to VB and am pretty much clueless, please help!
In my Access forms, i display data by month wise; and i want to give the conditional formatting with two condition;
If date of today is greater than target date for that month and if got value more than 0 - Red color
If date of today is lesser than target date for that month and if got value more than 0 - green color
Target date for every month in available in a separate table.
Quick question.
I have a continuous form in Access 2003 listing products for return for a customers. I am in the process of creating a completion form which will just have the product number, model number and then a command button called complete.
What I'm doing is have it so when the person clicks the button it adds a value to a field saying Complete. OK. But, what I then want it to do is for any record thats associated with this customer where the field = complete to have the command button gray out.
Is this possible? I know I can conditional format a text box to do this but can't see a way to do it with a command button? Any ideas?
I have though of layering a transparent button and having a textbox behind this with complete in and having this change colour but not sure if thats the best way?
Hello there,
I was wondering if any of you experts out there know a way to help me out here.
I was wondering if it is possible to color the text on the last pressed button on a continuous form different from all the others, so people will know which one they pressed last?
I've been trying a lot of different things here but i'm stuck. All i can get done is that all the buttons turn a different color, but doesn't solve anything.
I hope some of u can help me out here.
Greetz,
And thanx in advance,
Rutger
Can I use a command button to display my table? If so, what code needs to be used?
View 2 Replies View RelatedIs there a way to show the toggle buttons in an option group as NOT selected when the form first loads up? I've cleared all the default value properties in the table and the form but it always loads as showing one of the buttons pressed/selected. I want the form to load and both buttons in the group look the same.
View 3 Replies View RelatedI have documents (mostly Word) stored in an Access table. The table contains two fields. (1) a text field with the document's name and (2) an OLE field that holds the document.
When I press a button with the document's name on it (or it could be a hyperlink or a dropdown) on a form then I would like the document stored in the matching OLE field to open in the appropriate program for that document.
If I could set the permissions of the document to read-only then that would be great too. If I could prompt for read-only or read-write (no password necessary) access upon opening then that would be even better.
I can store documents in the table, but I have no idea how to launch them from a form button (or hyperlink, or dropdown).
Note: This is all within Access. This is not a web page related question.
Thanks in advance,
Andrew
I have a form thats already created. I would like to put a box or something next to a button so I can monitor when the last time the button was pushed. Ive seen it somewhere before and never took a moment or a need to see how it was put together.
View 2 Replies View RelatedI have a database I use at work for writing up non-conformance reports and we have 5 different dispositions(see picture) but when we run our report, they show up as numbers(1-5). I want to know how to get them to show up as text. I went into the main table and changed the "disposition" category to text and changed each button to show what text I wanted it to but for some reason it wont save. When I go back and click the radio button and bring up the properties, it reverts back to a number. I just want our dispositions to show up as the text(Use As Is, Rework, RTV, etc) instead of numbers when we run our monthly report.
View 6 Replies View RelatedI have created a button to display the current time ( sign in and out).
It works fine with this code Me.field = time$
However i need a code beneath it to run the actual query that will display this time onto the table...
I have attached an image of one of the query, I need it to run.
I have a form with a subform (FindBuffer_Form) which I built from a Query (FindBuffer_Query) within the query criteria I have the following (Like "*" & [Select the main Batch Number] & "*")in order to search a particular number.
I want to be able to run the Query from a command button on the main form and have the results appear in the subform, If I have the Source object of the subform set to Query.FindBuffer_Query I get prompted twice to answer the Criteria before the form opens, after the form opens the subform is generated as per the search criteria.
Ideally, I want the form to open with no data in the subform run the query from command button and have the result in the subform.
I am not sure where to start or go about creating message box that would display "No results found" if my queries return no results. My search of the forums hasn't been fruitful.
I have created one form that has a text box and a button that works as a search function to run through the tables and displays the applicable queries. Currently, if no results are returned nothing happens. Preferably I would like a message box to display stating that there were "No results found". I would assume that the code would be associated with the "Find" button. Here is the VBA code as it stands, again, I haven't even attempted to add code for a message box.
Private Sub Find_Click()
On Error GoTo Find_Click_Err
If DCount("Heading", "Service Desk Manual Query") > 0 Then
DoCmd.OpenQuery "Service Desk Manual Query", acViewNormal, acReadOnly
End If
[Code] .....
Find_Click_Exit:
Exit Sub
Find_Click_Err:
MsgBox Error$
Resume Find_Click_Exit
I have continuous form in Access 2010. I highlight selected record. Now I would like when user will select record, that record will display button to give ability user delete it. For not selected records button not visible and disable. How to display button only in selected record in continuous form?
View 2 Replies View RelatedI would like to know how on a report to make a button action that when i click it present information from contact list (full contact details).
View 1 Replies View RelatedSo what I've basically got here is a form with 4 combo boxes and a button that when clicked will filter the results of a table (which is a subform/subreport) based on the values inside the combo boxes. So the problem I have is that when I open up the form it displays a fully filled table but I just want to display the row names and a blank table until the filter button is pressed.
View 2 Replies View RelatedI have a single form which becomes either readonly or editable or addnew using a circular toggle switch. The toggle switch is activated by a command button and the caption of the command button is used as the display of the mode.
The SetAddModeBt is a separate command button that initiates the add mode. The problem is that various form or field properties when defined on the fly are not stored and they get lost when you open the form again. Look at the code below:
Code:
Sub tglEditBt_Click()
'-------------------------------------------------------------------------------
' Circular toggle button to change display mode of the form
' ReadOnly - Edit - Add
'-------------------------------------------------------------------------------
' On Error GoTo NotFound
Dim ForName As String
Dim strSQL As String
Dim FMode As String
[Code] ....
Here the first two cases fail when executing the last statement saying it is not supported.
I have created a web-database (? - There are globes over all the forms and tables icons) based on the Issues & Tasks template. This means that most of the data is entered and seen on the "Main" form, which has two tabs - Open Issues and Closed Issues. I have created a form that allows people at my work to input the necessary data and save it, so that it will show up on one of the two tabs. However, once a record has been created, I want to be initially locked if the ID/PK is clicked, so that data can't be changed or entered inadvertently.
SO, I changed the code so that when the ID/PK for a record is clicked, it brings up a different form, but one that looks exactly like the one that is brought up when entering a new form, but I locked all of the fields so that the information cannot be changed. It seems from what I have read that I can create a button on this form so that when clicked, it unlocks the fields on the form so that they can be changed, and then when clicked again it will lock the fields again. Is this true? If so, how can I do it? Or is there something similar I can do? I have seen codes that I could copy and paste, but I cannot figure out the place to copy and paste codes in Access 2010.
I have changed the Form properties so that Data Entry and all the "Allows" are set to No...
Hi, I have got a small problem and maybe someone could advise me.
I am creating a customised command button from a label button. The new button works fine but I can't apply the 'requery' function to it, if i do an error occures and i am being prompt to save the data first???? :confused: :
Private Sub Labelsearch_Click()
Me!itemquery.Requery
End Sub
Private Sub Labelsearch_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Me.Labelsearch.SpecialEffect = 2
Me.Labelsearch.BackColor = 255
Me.Labelsearch.ForeColor = 10092543
Me.Labelsearch.FontItalic = True
Me.Labelsearch.FontBold = True
End Sub
Private Sub Labelsearch_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Me.Labelsearch.ForeColor = 255
Me.Labelsearch.FontItalic = False
Me.Labelsearch.FontBold = True
End Sub
Private Sub Labelsearch_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single)
'Come back to initial state when button release'
Me.Labelsearch.SpecialEffect = 1
Me.Labelsearch.BackColor = 16373685
Me.Labelsearch.ForeColor = 8388608
Me.Labelsearch.FontItalic = False
Me.Labelsearch.FontBold = True
End
If I create a command button with the wizard and assign the code :
me!itemquery.Requeryto the on_click event my form is working fine.
Why is his code is not working if I assign it to a label? :o
Good morning, all...
I have an unbound box on a form and, within the box are 25 strategically placed "X" marks (text fields) named X1 - X25. I want only one of the X marks visible based on the value of two fields, i.e., if field "Impact" = 0.5 and "Probability" = 0.3 then X23 will be visible.
Could someone please get me started with the code to accomplish this?
Thanx in advance for your assistance.
Karen :)
Trying to setup a conditional format for a field on a form based on conditions from another field.
I have a form with [Field1] and [Field2]
I have a 3rd field called [New SMF]
What I want to do is have conditions on [New Field] so that if the value is greater than Field1 or less than Field2 the background of new field turns red.
How can I do this?
Jon
Hi Guys,
I've a question and I hope you can help me out.......
I'm trying to use Conditional Formatting Options on a Text box called "Date". I'd like that this box become Red if its value is between value1 from Text box "Start Date" and value2 from Text box "End Date" or Green otherwise (in this way the color change dynamically every time I change the values of Text Boxes "Start Date " and "End Date"). How can I do that? What I need to type in the Conditional Formatting Windows?
Thanks a lot for you help!!!!
Ciao Ciao
Hello
On my Database I have used Conditional Formattion to change the colour of the qty to highlight when the qty is getting low however its not as good as I would hope as there are different type of definition of quantity (D of Q) e.g. Each (single items such as a screw) and Roll (such as cord and tape)
Conditional formatting doesnt work well because if I have it as less than 10 the qty is in red, its ok for the each items however not the roll as 10 rolls of tape is more than we would need.
I am just wondering if anyone knows what the code would be to change the colour depending on the qty and the D of Q
All i have got so far is:
If me.qty <10 and DofQ = EA then
Now im stuck for the change colour part
Any help would be great
Hi Guys,
I'm after an easy way on being able to change the colour of a field once it a certain figure is reached
For instance
Standard field colour for anything 1-99
100+ changes to red
Would any be able to help me out please?