Hi,
I'm trying to conditional format a report to show up dates that occur in the past.
The formula I'm using is:
Expression Is: [EntryB].Value<Date()
The report is doing strange things though, in that some of the dates in the past are formatting correctly and some aren't.
I've played around putting brackets in the formula above, but to no avail.
Is my formula wrong?? Any suggestions appreciated!
Thanks
Hi
I have a form with a field "expiry date" . I want to apply conditional formatting to use as a reminder to show when the expiry date is approaching (say 1 month) and to leave in that style until a new date is entered.
Thanks
In my report I have date fields that span over 5 years with different pull dates ex. 3, 6, 9,12,24,36,48 and 60 months. I have successfully formatted these fields using the conditional format by:
Expression Is Date()<[9 Month] and Date()>[6 Month]
for the 9 month field and so forth for each field. This has allowed me to highlight the field that is the next upcomming date. One report I have this works fine for, very simple report. In a more complicated report, I have moved the fields together and have highlighted every other row to segregate them this formatting does not work. It will highlight the field, but it will pull in earlier dates, from 2004. Is there another way to format the fields with conditions other than the condition format? Possible to do it in code similar to highlighting every other line? The example I followed was here:
http://support.microsoft.com/kb/q210392
I will be out and about for a couple of days, but will return any replys to questions when I get back.
Thanks
I am trying to get my expiration date field to highlight a certain color once the date comes closer.I have weapons qualification dates. The user will input the date he/she qualified and then a expiration date (6 months from that day) automatically pops up.
Now what I want to do is once the expiration dates gets closer is change the color. So when it is 90 days from expiration it would highlight yellow, and when its 30 days away it would highlight red. I believe this can all be done through conditional formatting, but for the life of me I cant figure it out!!
I've got the conditional formatting thing down and am able to determine if a date is close to expiring by using 'value is less than now()+30', but I'd like to replicate the same thing, but the expiration date is based on the fiscal year (October to October).
The date entered is the date of qualification. How can I conditionally format to fit my needs?
I have a field that displays a date on a form.
I set the conditional formatting to be
Value is Between Date() and Date() + 14
It would only apply the formatting for dates that were equal to the date and +5 days.
I then tried Between Now() and Now() + 14
Same results
I then tried Between Date() and DateAdd("d",14,Date())
No change
I checked the property for the box and the back style is normal.
I am making the back color a light red. I tried to change the fore color red. Nothing.
I displayed what Date() was giving me in a text box control and I displayed what Date() + 14 was giving me in a text box control. They both were showing the correct dates, but my date, which was in between them, was not changing colors.
Need to confirm whether the Default formatting option in the Conditional formatting Dialog won't work in datasheet view of a form. Please note that all conditional criteria are working fine but not the Default Formatting option - only in the Datasheet view (In Single Form view the default formatting is working fine)
View 11 Replies View RelatedHi Guys,
I've a question and I hope you can help me out.......
I'm trying to use Conditional Formatting Options on a Text box called "Date". I'd like that this box become Red if its value is between value1 from Text box "Start Date" and value2 from Text box "End Date" or Green otherwise (in this way the color change dynamically every time I change the values of Text Boxes "Start Date " and "End Date"). How can I do that? What I need to type in the Conditional Formatting Windows?
Thanks a lot for you help!!!!
Ciao Ciao
Hello
On my Database I have used Conditional Formattion to change the colour of the qty to highlight when the qty is getting low however its not as good as I would hope as there are different type of definition of quantity (D of Q) e.g. Each (single items such as a screw) and Roll (such as cord and tape)
Conditional formatting doesnt work well because if I have it as less than 10 the qty is in red, its ok for the each items however not the roll as 10 rolls of tape is more than we would need.
I am just wondering if anyone knows what the code would be to change the colour depending on the qty and the D of Q
All i have got so far is:
If me.qty <10 and DofQ = EA then
Now im stuck for the change colour part
Any help would be great
Hi Guys,
I'm after an easy way on being able to change the colour of a field once it a certain figure is reached
For instance
Standard field colour for anything 1-99
100+ changes to red
Would any be able to help me out please?
Does anyone know if there is a way in a report to display an entire row in a different color? I'm running a report based on a query and I need specific information to come up in RED. I read about conditional formatting but you can only apply it to a field in a report, but not to an entire row. Let's say I have a group of managers and I need to know the ones that are making more than $50,000 a year. I don't just want the salary to come in RED, I need the entire row (like name, last name, title, date of hire, salary, etc).
Any ideas?
thanks!
I have 2 subforms on a main form. I would like to compare the value in field 1 og subform 1 to field 1 of subform 2. I can't seem to get the conditional foramtting between the 2 subforms to work. Any ideas?
Jim
Good afternoon everyone
I am new to this forum. I have not done access development for about 6 years so I appologise for my rustiness.
I have created a form based on a query. The form is of type Datasheet. I have assigned Conditional formatting to the grid fields based on an expression evaluating a check box. This works fine and when I open the form the conditional formatting works great.
However, I am now trying to add this form as a subform in A.N Other form. The parent form has no datasource and is purely there to display some text values linked to unbound controls. I did this because apparently you cannot show form header for a datasheet view.
When I insert my child form into the parent there is no logical link. The behaviour of the form and subform works fine but the conditional formatting does not appear in the subform grid.
Why is this and how can I best sort this?
Any help would be appreciated, but please be aware I am not fluent in VB as I have been away for quite some time.
Bets regards
Philm
Hello!
I am stuck with a problem in my database.
I got a table that is looking like this:
On_Time
95%
96,88%
100%
100%
97,56%
There is more data there but this is the field i want to use. I got a form where i want a little box or something to be coloured in red if the average of all those percentages are below 95%. If its above 95% it should be green.
Can anyone help?
Hi. I have a problem with my conditional formatting. I have two fields field 1 (hours worked) and field 2 (hours per task). Field 1 shows the hours worked based on the difference between a start and finish time and field 2 shows the hours per tasked based on values assigned to the 10 task fields. I set the formatting of field 1 to show up in red if it did not match the value of field 2, which works fine most of the time. However, for certain values i.e. 5 or 6 field 1 still shows up in red even though field 2 has the same value i.e. both equal 6.
Could someone explain to me why this happens and offer a solution if possible.
Thanks for any help.
I have an Access form that is used for traffic counts. I have a total of 8 lanes of data entry rows (4 lanes each way).I have two text boxes that show the number of lanes in each direction for a specific location. I need the input forms to enable ONLY the number of rows displayed on the text box and disable the rest. I dont have a clue on how to do it. Tried conditional formatting. But the conditions overlap.
View 2 Replies View RelatedHi,
I would like to format a report containg a PASS/FAIL field (electrical test results) so that the "Fail's" are printed in bold text, however when I use conditonal formatting #Name? is diplayed on the report instead of either Pass or Fail.
Any suggestions?
hi all
im trying to colour a cell that is null in datasheet view in a form. i can coulour values that are zero but i can't seem to find a way to colour null values.
any ideas??
How can I use conditional formatting to have a field change background colors if it is populated or stays white if left blank. Do I use field value, field has focus or expression.
View 1 Replies View RelatedHi,
I upgraded from Access 2000 to 2003 - I don't appear to have the conditional formatting option on the format tab in document view and no fomat tab along the top in design view - any thoughts any one?
Regds
Brian
I have two fields in my report: jc_lvd & jc_lvsd. Both fields have the possibility of either a "Yes" or "No" answer in their fields. I've combined these two fields into one field like this: =[jc_lvf] & " / " & [jc_lvsd]. When each field has a "No" answer, I need to highlight the background. I'm not interested in any other combination, i.e. Yes/No, No/Yes, Yes/Yes, ONLY if the fields are No/No. I have done conditional formatting with just one field but having both these fields combined is throwing me off. Would it be better to have separate fields for each and if so.........how would I have the conditional formatting look at two fields at the same time and then highlight both fields if they met my No/No criteria? Thanks for any help.
View 11 Replies View RelatedI have a field that most likely will not have an entry in it, BUT, ocassionally it will. When the field does have an entry in it, the entry can be any number amount. I've worked with conditional formatting before where I have the field color a background if the field meets a certain criteria, no problem. What I need to do is have the background of the cell highlight if their is ANY entry in it at all and not highlight, of course, if the cell is empty. Thanks for any help.
View 4 Replies View RelatedHi,
I am trying to place some code in the "expression is" section of conditional formatting. Need some help converting from code to conditional formatting format.
I have set up a check box "Check83" next to a standard control box "Title(O)".
Below is the code I am currently using. This code is in the after update section of the check box, and in the oncurrent section of the form.
This code turns the box blue when I click the check box.
Private Sub Check83_AfterUpdate()
If Me.Check83 Then
Me.[Title(O)].BackColor = vbBlue
Else
Me.[Title(O)].BackColor = vbWhite
End If
End Sub
My form has 46 records and all have check boxes linked to the control box with the code above. When the box is blue in record 1, I don't want there to be a blue box in record 2. Can't figure out how to do this. Tried to do in with code, but failed. Thought it may be possible using conditional formatting.
Thanks in advance for your help
Jcwishart
I have two date fields, I have it set so that when you place a date in the first field, the second field will automatically set a date 90 days after. What I need is for the second field to change red when it has been surpassed by the current date.
Thank you.
I have read the Access Help page before posting here
I have a text box called TxtCharRemain formatted as general number
It displays how many more characters can be typed into a text box named TxtActionTaken
I want the contents to appear in red when TxtCharRemain is less than 1 (0 or negative)
but it doesn't it only displays 0 in red then all negative numbers in black
I have tried setting default color as red and formatting the text box to display in black when value is between 1 and 200 and this doesn't work as values less than 100 appear red and negative numbers appear red or black
any ideas?
sorry for OffTopic.
does anyone knows if its possible to put more then 3 conditional formatting conditions in Excel ?