i am about to try and create my first unbound form, which i plan to use vba... god help me!!!
i plan to have a few text boxes on my form, and then on the same form have a tabbed control, can i have a continuous form in this tabbed control ?
Hi I have a problem that has been messing my head up. I want to be able to change the way the tab button works in a continuous form, instead of the tab tabbing across/through a single record first I want to be able to tab down/through the fields. I know this may seem strange to some but that is how I would like it to work. I could change the form to something else but that would require too much alteration and make life harder in the long run.
I currently have some VBA code set to ensure that the field that is select on open has a TabStop and all other fields do not. Is this the correct way of doing it or is there an easier way.
http://www.imagestation.com/picture/sraid215/pd61e514836ed9c50e77643aaf787f521/ecc91c25.jpg
Morian
I am having trouble with a continuous form setting Enabled to False in the current record only. I have tried code in the OnCurrent of the form and OnOpen, examples like
If Me.NewRecord then
Me!Quantity.Enabled = False
.....
also
If Me.NewRecord = True then 'if this makes any difference?
Dataentry is set to Yes and have tried No also with no difference.
So I can set all [Quantity].enabled to false but I only want to set the New Record, not all the records I have already created.
Any help would be appreciated as I still have a pretty basic knowledge of Access
Hi folks,
I've got two control buttons ('OK' and 'Cancel') on several forms. They work on the forms in Single Form view, but not on the one form that is in Continuous Form view. I couldn't find any mention of this behavior on this forum, but on another forum somebody mentioned that Continuous Form view makes control buttons do odd things. Any ideas on how to handle this?
Here's the code:
Private Sub OK_Click()
On Error GoTo Err_OK_Click
DoCmd.DoMenuItem acFormBar, acRecordsMenu, acSaveRecord, , acMenuVer70
Me.Visible = False
Exit_OK_Click:
Exit Sub
Err_OK_Click:
MsgBox Err.Description
Resume Exit_OK_Click
End Sub
Private Sub Cancel_Click()
DoCmd.Close acForm, "Glossary"
End Sub
Hi All,
I created an Event Procedure on the After Update event for a control in a continuous form. Basically, if certain conditions are met, I want it to disable another control. It works perfectly, except it is disabling the controls for all the records instead of just that record.
Does anyone know how to get it to just update that record? I've been researching and cannot figure it out!
Thanks in advance for any and all help :)
Krysti
Basically I have a continuous form with each record having a textbox and a checkbox. There can only be one checkbox ticked per record but what I want to do is to stop the other checkboxes from being ticked if one is already ticked.
View 2 Replies View RelatedI have a continuous form on which where each record has many controls, including control (A). I wish to set the colour of this control based on the contents of another control (B). Control B is a memo format and is placed behind another control making it hidden. The idea being that the user can then click on control(A) and look at supporting information from Control B on another form.
Conditional formatting cannot be used since this only allows conditions based on the control (A), not (B). Event procedures cannot be used since they all depend on making a record the current record, and I want the user to immediately see when further information is available. When I apply VBA code using an 'on load' event it is action for all records on the form in a way that if only one record has extra information, all records are flagged in this way.
I am mid way through a Access db and have a solid idea what i want from a form. The idea is for a rota display and edit form.
a tab control with 5 tabs (-2 weeks, -1 week, current week, + 1 week, + 2 weeks) and when the user clicks it lists all the employees (Employee Table) with any found rota entrys (Rota Table) populating into a text box type table with employees information blank where no rota information has been entered.
then the user can edit / add shift information from that table and hit save.
the main rota information is inputted by an excel import but this is done once a month and adhoc changes will be needed (holidays absence etc)
the only thing i found like what i want is a continuous form (which ive never used before but been told that wont go in a tab control)
How i would accomplish this (code snippets - doesnt have to be detailed just the fundamental functions so i can add modify to suit the information the sql's i already have its just the form controls.)
Access 2010. I have a form pulling from a query to create a "To Do' list of sorts. On this form is a button to open an input form for the corresponding record (I hope). When this button is used I want it to pull certain data for that specific line from the query and input it into the new record opened by the button. I know this is possible as I use another db that does this but I have not been able to figure out how to make it work in the new db.
View 14 Replies View RelatedI have a form that displays its records in a Contiuous Form. The controls on the form are: txtRecID, txtStudID, cboTrimester, cboType, fld Comment, and blnReqConf.
My issue is that I need the blnReqConf (Request Conference) checkbox and label controls to only show on the reocrds when/if the cboTrimester = "Tri-2" and the cboType = "Parent" or "Teacher" are selected or displayed.
I have written:
If cboTrimester = "Tri-2" And (cboType.Column(1) = "Teacher" Or cboType.Column(1) = "Parent") Then
blnReqConf.Visible = True
lblReqConf.Visible = True
Else
blnReqConf.Visible = False
lblReqConf.Visible = False
End If
The problem is that the controls display on all records throughout the form. How do I make it so that the controls are hidden on some records in the continous form and are shown on others based on the criteria? Is it possible?
Hello,
Please see the attached images (screen shots from my db).
I'll start by explaining the function of this form. Invoices are raised through a different area of the system - they then appear in the outstanding invoice list in my payment processing screen while awaiting payment. When a payment is received the user creates a payment using the controls at the top of the form. When created - payments will appear in a list box at the bottom of the screen. I then want the user to be able to highlight a payment from the list and type the amount to allocate against each line in the outstanding invoices subform. Then (once happy with the allocation) press the "Allocate" button which will cycle through the allocations the user has made inserting rows into my Transaction table - allocating the payment against multiple invoices.
The fields displayed in the outstanding invoices subform are selected in a query which calculates the amount still outstanding. In trying to illustrate my aim I've added an unbound text box to the subform (the column Allocate). What I'd like to be able to do is type a different amount against each outstanding invoice. I understand this is not the way that unbound controls work in continuous forms - i.e. that they are multiple instances of the same control hence when I type 100 against the first item in the list it appears against every item in the list. I can't use a bound control because the query is not updateable - and in any case, the entry won’t exist in the transaction table until it has been inserted anyway.
I'm pretty competent with Access and VBA but haven't really explored recordsets - I'm usually able to achieve what I want by binding my forms to stored queries. This, however, is a bit more of a complex problem than I'm used to dealing with.
So, to the point then. I guess my first question is - is it possible to achieve this? I'm sure it must be. If so please can someone try to shed some light?
Secondly, I have an idea but have absolutely no idea of how to implement it. I seems to me what I would need to do is build a temporary recordset for the form and add a field to it i.e. the "Allocate" field I've been talking about. The user would then be able to manipulate this recordset because the form wouldn't be directly accessing a query. Nor would there be any unbound controls on the form. Once the user had typed in all of the allocation figures they are happy with they would be stored in my temp recordset. They could then hit the "Allocate" button which would cycle through the recordset inserting rows into my Transaction table (as long as various validation rules were passed).
Does this sound possible? If so can anyone give me any help or point me in the direction of any material they know of that might be of any help?
Thanks in advance for your help.
To give a flavour of how I originally built this form I've attached another image - PaymentProcessingOld.gif. It's a similar kind of setup. Payments are created at the top of the screen and appear in the list box bottom left. The outstanding invoice subform serves only as a point of reference. The user actually allocates payments by selecting the item from a combo box and typing the amount. This builds the transaction I've talked about above. It's quite straight forward when there are only a few payments and allocations, but in practice payments are usually large and split across up to 100 different invoice lines. That makes it a very tedious task.
I have a continuous form and want to display 6 buttons. I want the buttons to display depending on if there is a value in a certain field or not..
fields "DocNum1" thru "DocNum6" from TCD_RequestedCRDB
I was told that the Visible property doesn't work for individual records on continuous forms (that it will affect all records).
Is this true? i tried and couldn't get it to work..
I have a continuous subform which queries a table of attachments. I'm using Access 2007 but not using the Attachment datatype; this DB will grow considerably and I don't want to waste precious space by filling it with bulky files. So instead, I have code which makes a copy of the attachment and adds the hyperlink (to the copy) to the table instead.
Now - I want to add a control to the subform to display an icon / image reflecting the file type of the attachment (Word doc, Excel s/s, PDF etc.)
But not sure how to go about it.
I was thinking I could use FileSystemObject.GetFileExtension at the point in the code where the attachment is added, and add a new field to my attachments table (i.e. translate "*.xls*" to "Excel", etc.) Then store / embed a handful of images for the core types I would expect and use an image control on the subform to display the image based on the value of that field.
But is that even possible / feasible?
Or, is there a handy API which can retrieve the icon associated with a file type based on what has been installed on the local machine (even if there is, there's still the problem of setting up the image control to display the appropriate icon specific to each record...)
Or, is there another control available which would be better suited to something like this than an Image control?
What I am trying to do is put a subform within a subform. The trouble is I want both forms to be continuous forms.
when I put the subform within a subform, access comes up with the following message:
************************************************** ********************
A form with a subform object cannot have its DefaultView set to Continuous forms.
You tried to add a subform to a form in design view.
MSAcess will reset the property to Single Form.
************************************************** *********************
which it does my higher level form becomes a form only showing single records at a time whilst the subform is a continuous form.
does anyone know of a way around this?
what about Access2003 does it allow this?
help much appreciated.
Steve Ferry
I have table that I had to add a new field to which we update with a form. I tried to add a control for the new field but the field does not show up in the list for the control source. I am trying to add a list box to the form with a blank and 5 options.
I have attached screen shots of the table design and the form. The table has the field in datasheet view and I have manually entered a few entries in it but it still will not show in the control source for the form control. The top section of the form is where we enter and select the data for the new records. The bottom section (circled in red) autofills the matching record, from separate tables, for updating with the new entries.
I have added form controls for modified fields in the past so I am confused about why this is happening.
I want to use buttons on a form to change the sort order on a continuous form. In the buttons click event I am using a public function (named Sort_1) to change the sort order. The first element of the event call is the name of a generic query (named Sort_1_Query1) and the query field to sort (LAST_NAME OR FRIST_NAME, depending on the button.)This is the Click Statement.
=Sort_1("Sort_1_Query1","LAST_NAME")
This is the Public Function
Public Function Sort_1(SortName As String, FieldName1 As String)
DoCmd.ApplyFilter SortName, FieldName1 & "between 'A' and 'Z'"
End Function
I think the problem is in the use of quotation marks or trying to pass the query field name to the Do Command or the use of an ampersand.
I have a continuous form in which I put a command button for each record called "detail". I would like to click on the "detail" button and make it open another form containing all (and only) the info on this record.
At first I refused to use an "id" to link both forms, but finally I added the "id" in the table... however still does not work.
continuous form: "04 - GASTOS_BUSQUEDA"
id field on continuous form: "Gastid"
pop-up (details) form: "GASTOS_EDITAR"
id on pop-up (details) form: "editar_id"
This is what I have tried on the "click" properties of the "details" button field (called "btn_editgs"):
1)
DoCmd.OpenForm "GASTOS_EDITAR", acNormal, , "[editar_id] = " & Me.Gastid
2)
DoCmd.OpenForm "GASTOS_EDITAR", , , "[editar_id]=" & Me.Gastid
3)
stLinkCriteria = "[editar_id]=" & Me![Gastid]
DoCmd.OpenForm "GASTOS_EDITAR", , , stLinkCriteria
4)
Private Sub btn_editgs_Click()
On Error GoTo btn_editgs_Click_Err
Dim strWhere As String
strWhere = "[editar_id] = " & Me.Gastid
DoCmd.OpenForm "GASTOS_EDITAR", , , strWhere
btn_editgs_Click_Exit:
Exit Sub
btn_editgs_Click_Err:
MsgBox Error$
Resume btn_editgs_Click_Exit
End Sub
I have a continuous form that displays all my customers .I want to be able to dble click a customers ID and go to there customer details form.
View 14 Replies View RelatedHow to populate the parent form's PK to multiple records in a child subform set to a default view continuous form?
In other words, how to auto populate the primary key to multiple records displayed the subform?
I have a continuous form bound to a recordset that has the following fields:
- Ignore: Boolean
- OverTime: Boolean
- AnnualLeave:Boolean
-ExtraValue: Double
The Ignore, OverTime, AnnualLeave fields are bound to a I, O, A checkboxes respectively in this continuous form. The ExtraValue bound to a EV textbox in this form.
What I want is that when the user check O or A checkboxes, the EV textbox is enabled only for this form record NOT all the form records, when the user check I checkbox, the EV textbox is disabled only for this from record, NOT all the form records.
The problem is that whenver the user check, all the form records EV text box is affected by this action.
Is there any way to achieve this?
I have a continuous form which I have placed a unbound text box. For some reason when I place a value in the box it duplicates the value in all the correponding records! Any ideas why!!
View 1 Replies View RelatedHi, thanks.
View 1 Replies View RelatedThe problem is that I have a recordset Rosters.
Fields are ShftDay, A, B, C
The ShftDay is distinct field.
I have continuous form mapped to this recordser.
This continuous form have 4 text boxes, each is mapped to one of the recordset fields.
The user can edit these fields.
What I want to do is when the user enter the value "Na" in one of A,B or C textbox, I want the backcolor property of this textbox to become pink.
What I face is that for example if I enter the "Na" value in the A textbox, all the cells of the A textbox are converted to pink. What I want is only the cell in the edited record, not all.
Please Help Me.
I have a subform in continuous mode which has a list of people. I have created an unbound field which has a dlookup into a telephone number table.
What I want to happen is for each person in the list to have their telephone number displayed (not recorded - just displayed) on the form alongside their name. On a single form this works fine, but on a continuous form it displays the same phone number on all the rows (presumably the first person in the lists number).
Can anybody advise how I can get the dlookup working for each record in the continous form.
Thanks in advance,
Adam.
Thanks for reading another one...
I am building an application for my marketing dept. that will track their mailouts. So far I can handle it; however, they want a thumbnail displayed of each piece of creative. I can do this if they only wanted to see one record at a time, but they want all records w/in a certain date range and the pic that goes with it. I am currently storing the path to the image so not to gorge my db to explosion.
pic campaign_name start end mail_out #_pieces
pic campaign_name start end mail_out #_pieces
pic campaign_name start end mail_out #_pieces
pic campaign_name start end mail_out #_pieces
where pic is the thumbnail. I have built it with a continuous form so I can display all the records but I am up to change if needed.
I have read other posts and they all deal with single forms and the onCurrent event is not really working for me.
Any and all help is greatly appreciated!
Hi All - It must be the early hour or something, my brain is dead.
I have a continuous form of Pharmacy items that belong to a specific customer. At the end of each row I have a TickBox.
I have a button that prints a report on the form and when it prints the report I want the TickBoxes to then be ticked automatically. When I put the code
Me.Tickbox = -1
it just ticks the first item and not all the tickboxes.
How can I get it to do the rest? (I have searched but found nothing yet of help)
Col