Hope somebody can help with this. I checked the archives but not luck.
My continuous form allows entry of 12 records. On the thirteenth record the new row scrolls to the top and all the previous rows disappear. Every new record after that scrolls up out of view and a new blank row is at the top. I can scroll up to see the previous records but they do not scroll one at a time as data entry is performed.
Data Entry is set to No, Allow Additions is set to Yes.
I'm using access 2000, and have built a long form. My users would like to be able to use their mouse wheel to scroll down the length of the form rather than having to click the scrollbar. is there a way to do this? (I'm sorry if I missed this being answered in another thread, I looked but did not find.)
Hey, just a quick question that I hope someone out there maybe able to help with :-) In form view I don't want the mousewheel to scroll through my records when I use it, Can someone tell me what is the easiest way of turning this option off? I tried editing the [event procedure] in the form properties but it bought up a page in VB which I have no idea how to use. Sorry if that is confusing, basically i only want mousewheel to scroll down the form page that I'm on and NOT iterate through all my records. Any help would be much apprecitated :-) Thanks
I have a table with about 290 record. When I'm in the "Form View" and click the "Next Record" arrow it scrolls by order of Employee instead of the primary key "Record Number".
What I am trying to do is put a subform within a subform. The trouble is I want both forms to be continuous forms.
when I put the subform within a subform, access comes up with the following message:
************************************************** ******************** A form with a subform object cannot have its DefaultView set to Continuous forms.
You tried to add a subform to a form in design view. MSAcess will reset the property to Single Form. ************************************************** *********************
which it does my higher level form becomes a form only showing single records at a time whilst the subform is a continuous form.
I want to use buttons on a form to change the sort order on a continuous form. In the buttons click event I am using a public function (named Sort_1) to change the sort order. The first element of the event call is the name of a generic query (named Sort_1_Query1) and the query field to sort (LAST_NAME OR FRIST_NAME, depending on the button.)This is the Click Statement.
=Sort_1("Sort_1_Query1","LAST_NAME")
This is the Public Function Public Function Sort_1(SortName As String, FieldName1 As String) DoCmd.ApplyFilter SortName, FieldName1 & "between 'A' and 'Z'" End Function
I think the problem is in the use of quotation marks or trying to pass the query field name to the Do Command or the use of an ampersand.
I have a continuous form in which I put a command button for each record called "detail". I would like to click on the "detail" button and make it open another form containing all (and only) the info on this record.
At first I refused to use an "id" to link both forms, but finally I added the "id" in the table... however still does not work.
continuous form: "04 - GASTOS_BUSQUEDA" id field on continuous form: "Gastid"
pop-up (details) form: "GASTOS_EDITAR" id on pop-up (details) form: "editar_id"
This is what I have tried on the "click" properties of the "details" button field (called "btn_editgs"):
4) Private Sub btn_editgs_Click() On Error GoTo btn_editgs_Click_Err Dim strWhere As String strWhere = "[editar_id] = " & Me.Gastid DoCmd.OpenForm "GASTOS_EDITAR", , , strWhere btn_editgs_Click_Exit: Exit Sub btn_editgs_Click_Err: MsgBox Error$ Resume btn_editgs_Click_Exit End Sub
The Ignore, OverTime, AnnualLeave fields are bound to a I, O, A checkboxes respectively in this continuous form. The ExtraValue bound to a EV textbox in this form.
What I want is that when the user check O or A checkboxes, the EV textbox is enabled only for this form record NOT all the form records, when the user check I checkbox, the EV textbox is disabled only for this from record, NOT all the form records.
The problem is that whenver the user check, all the form records EV text box is affected by this action.
Does anyone know why with some combo boxes, when I grab the scroll bar and haul it to the bottom of the records, after I let go of the mouse button, the scroll jumps back up to around the middle of the combo box? Then, I have to keep pulling it to the bottom several times before it finally gets to the last record. Thanks
I have a continuous form which I have placed a unbound text box. For some reason when I place a value in the box it duplicates the value in all the correponding records! Any ideas why!!
This is not an other post about disabling the mouse wheel in access application but an other issue that is starting to really bug me... Some of my forms have a continuous subform, I can normally use the scroll wheel to go up and down the different record in the subform BUT i have noticed that if there is just a small amount of record in the subform (let's say three for example) when I scroll down the different records, they disapear in the detail header frame of the subform and only the last record is visible which I guess I don't mind to much. What annoys me is that if I scroll back up nothing happens the 2 records stay hidden behind the frame and the only way to put it back to normal is to use the scrolling bar on the right of the subform!??? I was wondering if anybody had a similar problem and if there is any solution to it?
In Access (2003) I was able to (by default?) scroll through records with the mouse scroll wheel. That no longer works. How can I have the form scroll backwords and forwards with the mouse wheel?
I've been reading threads and it sounds like MS "fixed" a feature that I was relying on heavily to move through records. I can't find a way to enable it again......
how can i stop wheel mouse scrolling on certain forms? it is ok on some forms but others where specific data is viewed can be scrolled to a blank space.
This is kind of ridiculous, but I'd like to get to the bottom of it.
I have a form with a tab control on it, which holds all my controls on several pages. The tab control takes up almost the entire form; there's only a small area of the underlying form visible around it. For some strange reason, every time I open the form or switch from design mode to form mode, the form scrolls down a bit, on its own, so that my tabs are hidden and I have to manually scroll back up to see them. Apart from being very annoying, this may also hide the fact from some unsuspecting future user, that there are any tabs at all.
Can somebody explain this, and, hopefully, suggest a solution?
The problem is that I have a recordset Rosters. Fields are ShftDay, A, B, C The ShftDay is distinct field. I have continuous form mapped to this recordser. This continuous form have 4 text boxes, each is mapped to one of the recordset fields. The user can edit these fields. What I want to do is when the user enter the value "Na" in one of A,B or C textbox, I want the backcolor property of this textbox to become pink. What I face is that for example if I enter the "Na" value in the A textbox, all the cells of the A textbox are converted to pink. What I want is only the cell in the edited record, not all. Please Help Me.
I have a subform in continuous mode which has a list of people. I have created an unbound field which has a dlookup into a telephone number table.
What I want to happen is for each person in the list to have their telephone number displayed (not recorded - just displayed) on the form alongside their name. On a single form this works fine, but on a continuous form it displays the same phone number on all the rows (presumably the first person in the lists number).
Can anybody advise how I can get the dlookup working for each record in the continous form.
I am building an application for my marketing dept. that will track their mailouts. So far I can handle it; however, they want a thumbnail displayed of each piece of creative. I can do this if they only wanted to see one record at a time, but they want all records w/in a certain date range and the pic that goes with it. I am currently storing the path to the image so not to gorge my db to explosion.
pic campaign_name start end mail_out #_pieces pic campaign_name start end mail_out #_pieces pic campaign_name start end mail_out #_pieces pic campaign_name start end mail_out #_pieces
where pic is the thumbnail. I have built it with a continuous form so I can display all the records but I am up to change if needed. I have read other posts and they all deal with single forms and the onCurrent event is not really working for me.
Hi All - It must be the early hour or something, my brain is dead.
I have a continuous form of Pharmacy items that belong to a specific customer. At the end of each row I have a TickBox.
I have a button that prints a report on the form and when it prints the report I want the TickBoxes to then be ticked automatically. When I put the code
Me.Tickbox = -1
it just ticks the first item and not all the tickboxes.
How can I get it to do the rest? (I have searched but found nothing yet of help)
I have a continuous form setup that has a check box field (Yes / No) I also have a command buttom to preview data. How can I code the command button for each record so that is the check box = No then the command button is not visible. I had code in the on open but it seem to either make the command button visible for all records on invisible for all.
I have a continuous form, which is used as a sub form in a main form. How can i put some code on a control which will work only, if the focus is on the last record (the event i would like to use is onKeyDown). I have tried using:
I am going to retype this as perhaps my original explanation was too wordy.
I need to display data from 2 tables in a continuous form. Sure I can do this with a query and a join, but the user needs to be able to add records to the form as well. When adding a new record, only one field need be entered (actually selected from a combo box) and the other 2 fields would auto-fill based on the selection.
Is there a way I can requery a continuous form. Basically my form runs from a query. If when certain criteria become true I want that record to move to a different form, (working on another query) Basically I am saying is that if checkbox1 = true then I want to hide that record. Does that make sense?
On a continuous form, i have discovered how to enable/disable fields by checking/unchecking a box, but is there a way of enabling/disabling the fields for only the relevant record and not for all records?
Also in a continuous form, i would like no further record additions after the first record until a button is clicked on. Is this possible?