I want to put three buttons on a form to filter records (Filter by form), a clear form button and one that applies the filter (Apply Filter) similar to those on the toolbar. The wizard for control buttons in the toolbox isn't helpinjg much. Any ideas?
Tony
I am not even sure where to start with this small problem that will make a big difference.
I have a database that produces yearend accounts, its highly specialized to my industry.
The year end accounts have schedules these can be 1 to 3
On my form I have it set up for 3 schedules, but can be used for 1 and 2 schedules accounts.
However when it come to the reports for layout reasons 3 of the 14 reports needed are tailored to a 1, 2 or 3 schedule, and i have created reports and buttons on the form according to the number of schedules for that account.
What I want to know is this, I have a field on my form that states the number of schedule for that account, is it possible that if say the account i am working on is a 2 schedule account, that it disables the 1 and 3 buttons?
I have 2 Option buttons that I want to use to control a combo box. If I select Option1 then I want it to pull from one table for the drop-down choices. If I select Option2 I want it to pull from a different table. The Option buttons and combo box are all on the same form.
View 5 Replies View RelatedI'm building a workCube reservation system and I've been tasked to have it work kind of like an airplane seat reservation system. I've laid out my form with option buttons representing the location of each available space. (space1, space2, space3...space16)
My desired outcome is to be able to select a date from a calendar popup and have the options buttons react to that date if they have been reserved. (change color and indicate "reserved").I've tried to create the form based on a query which represents the "booked" table.
Tables:
Employee
(k)empID
emplyeeName
Space
(k)spaceID
space
Booked
(k)spaceID
(k)empID
(k)bookdate
Some rules a space can be booked by any ONE employee on any day.How can I get any and all of the option buttons to react if there is a reservation in place on the day indicated by the calendar?
Any help will be most appreciated!!
1) I have a Main form with a tabbed form that has two subforms attached to it. How do I move the focus from the last field on the first subform to the first field on the 2nd subform without using the tabs at the top of control.
2) Subform #2 is a dependent form of subform #1. Since I can have many products associated with the customer form, I have added an add new record command button using the wizards. The button does not take me to the first field on the 2nd subform it just sort of blinks.
Thanks in advance
~VanEpps
I would like to turn the tab style to none and select the tab pages with a
command button instead is this possible.
Thanks
I would like to be able to use several control buttons to change the sorting order of the selected records on a form. The only way I have been able to do it so far is with a macro "go to control" and then using the Sorting Icons on the menu. Grateful for any help
View 1 Replies View RelatedHi folks,
I've got two control buttons ('OK' and 'Cancel') on several forms. They work on the forms in Single Form view, but not on the one form that is in Continuous Form view. I couldn't find any mention of this behavior on this forum, but on another forum somebody mentioned that Continuous Form view makes control buttons do odd things. Any ideas on how to handle this?
Here's the code:
Private Sub OK_Click()
On Error GoTo Err_OK_Click
DoCmd.DoMenuItem acFormBar, acRecordsMenu, acSaveRecord, , acMenuVer70
Me.Visible = False
Exit_OK_Click:
Exit Sub
Err_OK_Click:
MsgBox Err.Description
Resume Exit_OK_Click
End Sub
Private Sub Cancel_Click()
DoCmd.Close acForm, "Glossary"
End Sub
Hi all, a newbie with novice access skills.
I'm very good with utilizing the access tools however I can only code in vb editor minimally. What I'm looking to do is have the option buttons control two combo boxes. One to search by user name and the other to search by serial #. I've created an option group with two buttons I set the default values in the combo boxes in accordance with the option buttons However, the option buttons aren't doing what they are supposed to do. I've been told I need to tweak the code for the buttons in order to make them control the combo boxes. Does anybody know what I need to do to make this happen? Ultimately the user will be able to click either of the buttons to perform a search through a single combo box.
Thanks to everyone out there for making this possible. Your expert knowledge will help me grow into an expert myself.
Thanks to all in advance! :confused:
Is there a custom control available that acts like a listbox or subform that has sort buttons at the top of each column?
Need more than 32k size too (Listbox limit). Access 2003
Hello everybody,
I’m new here and I have a question for you..
Is it possible to place round buttons or oval buttons on your forms instead of the normal square ones?
Greets,
Tom
I added a new field to one of my tables and query, but when I try to add a control for that field into my form it is not recognising it and the field isn't appearing in the sources for the form, even though the table is sourced to the form? Or am I going to have to do the usual and redo the entire form because I made a minor adjustment?
View 1 Replies View RelatedI have a form with a tab control, inside the tab control I placed an ActiveX control (Microsoft Web Browser). These are at the bottom of the form.
Everything displays fine if the entire form fit on the screen but if the form is too long and I scroll down the browser control is getting obscured by the tab control and getting chopped off (the contents are covered). It is as if the browser control is staying in space where it was and moving behind the tab control as I scroll.
This problem does not occur if I place the browser control directly on the form. Also I note that the browser control is sitting correctly within the tab control.
I have been through all the settings and properties of both controls and haven't been able to fix it. I searched all over the web but no one has previously stumbled across this one by the look of it.
See the attached image ...
Where can I find the Hex or RGB value for the blue colour that Access 2010 uses by default for buttons on forms? I need to change some buttons to yellow (I know the code for that) but later change them back to the previous shade of blue, which is shown in the Properties pane "Accent 1, Lighter 40%".
By clicking in the standard colors area at the bottom of the colour chooser I can find a very similar blue #D6DFEC but it doesn't look quite right. And the "accent" colour does not give me a Hex value.Is that "usual" blue even one colour? How can I reset a button to that style having changed it?
I have a bit of a problem with a database in Access 2013. On 1 of the forms, I have a number of buttons which open other forms and filter the results using an embedded macro. All has been well until a few days ago when error 2950 pop up box started appearing. After fiddling around for a while it all works OK (without actually changing anything) until next time the database is opened. I checked to make sure the location is "trusted" and all seems OK.
View 4 Replies View RelatedIs this possible? I can't seem to find this q anywhere here so I thought I'd post.
I changed the colour of my form to white, but the Navigation Buttons at the bottom and the command buttons that I 've added stay at the default grey.
Is there anyway to change this? I right-clicked and tried changing it to white through the properties but there's nothing there that does this.
:confused:
Is this possible? I can't seem to find this q anywhere here so I thought I'd post.
I changed the colour of my form to white, but the Navigation Buttons at the bottom and the command buttons that I 've added stay at the default grey.
Is there anyway to change this? I right-clicked and tried changing it to white through the properties but there's nothing there that does this.
:confused:
I'm a bit tired of the buttons I have been using both default MS and my custom ones. I'd like to find some more interesting versions that I can use and have been searching on google etc but the options are limited. Does anyone have any favourite links I can follow?
View 1 Replies View RelatedI've made a form with buttons i.e. Age, medical etc. At the moment they're all on one page. Is there a way to introduce like a drop down list where they select 'medical' and it will only show all the buttons related to medical (Obviously I will specify which ones these are)
View 1 Replies View RelatedI am working on a database to hold the data regarding our company vehicles. I have a table for the details of the vehicle (i.e Registration, VehicleType, Drivername etc) and a number of tables for different types of equipment (AccessEquipment, LiftingEquipment, StandardEquipment and others).
I have a form that runs on a query with the criteria to search for the registration number. I have also set up forms to show each type of equipment to use as sub-forms. I would like to have on this main form a number of command buttons that would open the specific sub-form on the main form.
How can I do this? Any ideas would be greatly appreciated?
Whenever i make a button on a form to do something like go to the next record or open a form, i get a message saying "invalid procedure call or argument" when i press ok the VB debugger open and gives me this code
Private Sub Command17_Click()
On Error GoTo Err_Command17_Click
DoCmd.GoToRecord , , acNext
Exit_Command17_Click:
Exit Sub
Err_Command17_Click:
MsgBox Err.Description
Resume Exit_Command17_Click
End Sub
I recently upgraded to Access 2007 from 2003. The upgrade was in June and went smoothly. I added a couple of drop down boxes to my form in August and that seemed to have gone fine as well. Suddenly, at least two weeks later, my form buttons are not working. I added the pathway to my database to the list of trusted locations. Everything I have read says this should work. This did not make a difference. I am able to edit forms, run queries and reports, and can add new records by entering data directly into tables but am not able to add new records, view details, close forms, or exit using my buttons/forms.
View 7 Replies View Relatedhow to use option buttons? I've looked around, but I cant find any site, thread, etc, etc on how to fully use them. I have 3 option buttons, there "Retired" "Current" and "Not Stocking" I want them to be tied the the list box named "lstItems" that gets its info from a qryItems.
View 14 Replies View Related I'm trying to create a switchboard through which one can access data entry forms. Now there are about 13 of such forms but I've put only 3 here for simplicity. The idea is to have a button (on the main switchboard) represent each category but I understand the switchboard will not allow more than 8 buttons on it? I guess that by the end of the day, I will probably have two secondary switchboards for these 13 buttons. I created the main & secondary switchboards (the second is called "This is the Look I want"). A button called "TheOtherBoard", on the main switchboard, should take me to "This is the Look I want".
1) I don't like the way the Main switchboard looks and decided to create the secondary switchboard with the look I prefer but it duplicates anything I do. How can I fix this?
2) when I double click on the main switchboard, the secondary board (with colourful buttons) opens. Should be the ugly one first!
3) Also, since I manually added the buttons & stuff, I think I'll need to link them with the forms.
I ma going to sound a complete idiot with this question, but I have been working on a database for some time now, successfully putting buttons on forms with the wizard, jumping from form to form, form to report, basically the button wizard used to work now it doesn't and I don't think I have done anything stupid. (I hope). The wizard was brilliant, I'm lost without it. How do you restore it?
Thanks in advance guys. :confused:
Sorry if this is too trivial to be posted as a new thread, I have spent a considerable amount of time trying to do this but have failed miserably.
I want to remove the set of command buttons at the bottom of the forms, (the navigation buttons to move the next record etc.) as i want to create my own. And also when I have got two or more subforms this looks too cluttered.
Can anyone help me?
Thanks.