Control On Last Page Only
Apr 4, 2006Is it possible to have a button that appears only on the last page of a form showing a number of records?
If so how is it achieved?
Is it possible to have a button that appears only on the last page of a form showing a number of records?
If so how is it achieved?
Hi folks,
I've searched through the forums and found a little on tab controls, but haven't been able to figure out what I am trying to do.
I have a form with mutliple tabs, each of which contains a subform related to the form on the first tab.
When I am scrolling through the records, I might select the fourth or fifth tab to view that subform, and then, when I scroll to the next record (using the nav bar) I want to stay on that tab... but so far, my form always defaults back to the first tab.
Any suggestions on how I can keep the form open on the tab that has the focus would be a great help. Thanking all readers in advance....
Don
Hi,
I have created a form with a tab control covering most of it and have about 7 pages set up. I am finding that when I load the form it automatically scrolls down and cuts off the actual tabs at the top.
I have tried moving the control further down the page but it just scrolls further, and I have attempted to make all text fields etc non-tab stops but it still skips to the top.
Any ideas?
Hello,
Is there a way to program a Next Page button for a tab control that can be put in the form's header and that'll go to the next page, regardless of what page I am on?
Thanks.
Hi -
I have a form that is multi-page. On the third page of that form, I tried to set up a tab control that allows me to natvigate among three subforms. The problem is that the moment I click a tab (which is on the third page of the multi-page form), the form automatically jumps back to the first page.
Is it possible I can fix it so that when I use the tab control on the third page on a multi-page form, I will not get bounced back to the first page? Although this sounds simple, I cannot figure it out.
Thanks
tm
I'm wondering if there was a way to put a button on my first tab that, when pressed, will take me to the second tab.
Thank you.
If it possible to change if a group is visible based on what page a different group is printed on.
The report I'm working on is a Invoice and it has subtotals in one group and totals in another group.
If the totals are going to print on page 1 then there is no need to print the subtotals. Is there a way to know what page the totals will print on so I can set visible for subtotal group to true or false?
If there a way to set focus to a specific page from a command button on a Tab Control?
I tried Me.TabCtl0.Value = 3.
But it doesn't work.
I'm using a web control to display a page. I want to have a code that can copy to a field in that same form, the html source of that page that is displayed in the web control. How I can do that?
View 13 Replies View RelatedI have a form with a tab control and an option group (frame). When I built the layout of the contents of the first tab, the frame responded properly to click events. Now that I have copied them onto the tab control, the events seem to disappear.
(When I check the events for the controls, they are all still there, and selected by the Properties table).
I know it's probably one of the "doesn't use Access very much, does he" type of situations, so how to get these controls working again!
Here is the Form Code listing.
Option Compare Database
Option Explicit
Sub SetSourceDescription()
If Me.frRunMode.Value = 0 Then
Me.lblSourceType.Caption = "Source for this run will be the Extract .pst file(s)"
[Code]...
Is it possible to use a formula in the Caption property of a page in a tab control (i.e. to make it dynamic)
I have a number of tabs each with their own subform (with each subform driven by its own unique query)
I'd like the tab name to include the number of records returned by that query (so as records are added, the tab name is automatically updated with the new number)
So something along the lines of :
Page 1 (" & DCount("[ID]","[qryQuery1]") & ")"
Such that the page name appears as :
Page 1 (7)
I know I can code this programmatically but then that code has to be triggered by some event and I need the counts to be as real-time as feasibly possible rather than requiring the user to click on a control to trigger it. I was hoping by using a formula directly in the Caption property of the page, it would be dynamically updated every time a new record was added without the need to trigger an event first.
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
View 3 Replies View RelatedI have a report that lists states and cities within the states. When a state name happens to be at the end of the page the individual cities appear on the next page with no State heading. I solved the second page problem by setting the "repeatSection = Yes" in the Section Header (though I haven't shown that in the example below).
But the previous page (which just shows the State Name and no cities looks dumb. Is there some sort of solution.??
(Actually I would also like any State that continues to a next page to not just have the state name but something like
" Colorado (Continued)" Is there anything I can do in VB to make a page break if the section is going to print but therer isn't enough room for one detail line?
This is what I currently see
Alaska
Ancorage
Prudo Bay
California
Whittier
Anaheim
Colorado
------------------------Page Break ---------------------------------
Denver
Pueblo
Colorado Springs
Deleware
Dover
-------------------------------------------------------------------------------------------
Thanks !
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
Hi All,
I have a data access page needs a filter by a dropdownlist, the dropdownlist used is a html control and I use javascript to filter the data programmaticlly in the onchanged event of the control.
MSODSC.DataPages(0).Recordset.Filter="AppID = 3";
My problem is, when this statement runs, the page refreshes. But I don't need the page refreshes, it set the dropdownlist text to the default text, not the value user select. The browser is IE7.
How can I stop the page refresh itself?
Thanks and Happy New Year!!
I have one-page forms which print a second page, blank except for a block of grey shading at the top. I have tried moving the content of the form up but that doesn't eliminate the second page. If I look at print preview, every second page of the entire database shows up as blank, regardless of where that happens to appear in the record.
View 2 Replies View RelatedI have a report that should only show 1 page yet I have 2 and one is blank . I cannot find out why?
View 3 Replies View RelatedI am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.
1. Print page footer with Report header = NO - only works if your report is two pages or more.
2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer)
If Page = Pages Then
Me.[TextBoxName].Visible = True
Else
Me.[TextBoxName].Visible = False
End If
End Sub
The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.
to automatically create a second, third, fourth... page depending on how many characters are in the narrative. The only other thing needed to be changed is the page# of Page#.
So right now my form looks like below
CAD#
Person name
Charge
Narrative
"
"
"
"
"
"
"
"
"
"
"
"
"
Officer name date page # of #
Thanks in advance.
Matt
Hi All
I have added the Allen Browne Calendar 2k control to my form.
My form consists of 4 pages. On pages 2 and 3 I have subforms and on page 4 I have Personal data. Page 1 is general data and the Calendar is on Page 1.
What is happening is that the Calendar is also being displayed on my 4th page, in the same position as page 1. When I try to move it, cover it or delete it from page 4, it is also gone from page 1.
Any suggestions please?
Many thanks
Tee :(
I've used the following code on the footer on print procedure:
Private Sub PageFooterSection_Print(Cancel As Integer, PrintCount As Integer)
Me.PageFooterSection.Visible = (Me.[Page] = 1)
End Sub
This works fine when you view it in print preview, but the footer don't show up at all when you actually print it.The reports default view itself is set print preview.
I have made a report on my query. The page setup is all around merging 0.2" and page size A4
When i view this report in preview it looks all my data whatever i want in a page but after every page it will generate a blank page.
I have included my report.
I have a form with six tabbed pages on it. Since data entry follows in a logical order I would like to put a command button on the bottom of each page (subform) that can be used to go to the next page. What I am going to though? If i put a command button (open form) then it opens the whole form not as a subform on a tabbed page. if I try and put a command button (open page) then it will not let me enter the page number. Hope that makes sense! Any ideas
View 3 Replies View RelatedI am trying to create a report that has the dates go accross the page and not down the page .
Example:
Need:
Jan 2014 Feb 2014 March 2014
Ans so on. I will also need datat under each date.
I am having issues with the reports to give me the output that I need.
I have seen large projects in which there are clearly several printed database reports printed out to make one booklet.
1. How does one get page numbers for multiple reports to go in sequence instead of starting over again at 1 for each report.
2. How can you add a page reference in one report to something in another report?
Do you have to do these things by hand or is there a way to create a something with auto numbering capabilities? Do you do it by importing the reports to MS Word and creating a master document?
I added a new field to one of my tables and query, but when I try to add a control for that field into my form it is not recognising it and the field isn't appearing in the sources for the form, even though the table is sourced to the form? Or am I going to have to do the usual and redo the entire form because I made a minor adjustment?
View 1 Replies View Related