Convert Text Field To Number Field But Keep Leading Zeros
Oct 3, 2006
I need to convert my text data to a number but when I convert using the VALUE function or use "format cells" to the numbers category, I loose the leading zeros. I need to keep them for sorting purposes.
I have read that the number field doesn't show the leading zeros in 2007... does 2010 have a way to do that, or does it still have to be a text field in order to see them..?
As the title says, i have an identifier field which combines two codes eg. AAAAAA/1234.
I am using a query to extract the number part, however when i try to link to another query it says 'type mismatch'.
I assume that this is because the main query is based on a table where [ShipID] is numeric and the extracted data is based upon a underlying table where [PackageID] is a text field.
I'm learning as I go and this is probably a basic question but if I have an alpha numeric field of variable lenght, i.e. AUI856Z....how to I format it so that it is 19 characters long with leading zeros, i.e. 000000000000AUI856Z.:confused:
I have a multivalue text field called "Groups" that is generated through a relationship with another table called "Comments". When I set this up I left the field as a text field when it should have been a number field, and now I can't use the database with sharepoint, because the field needs to be a number field.
My Question is there a way to convert it without loosing all my data, as there are over 5000 records?
My Table with the multivalue field is called "Contacts", the field is called "Groups".
I tried update and append queries but I must be doing something wrong....
I have a DB containing over 4 million rows of data, each with a SALES_PERIOD based on YYMM. Our Developers set it up as Text, and index this item accordingly, I would like to format as numeric with the lead zero to allow quicker indexing, but when I format it it returns to text this is the formula I use?
This is probably an easy question by comparison to some of these others.
I have a table where a transaction number is always 8 digits. If the number is not 8 digits, it should start with zeros, such as
12345 should be 00012345
123456 should be 0123456
Is there a simple and fast way to do this? It can also be done in a form, since I enter the data through there. Will it be necessary to change the field from a number to a text data type?
I am formatting a table to be exported via fixed width and one of the main frame requirments is to have the dollar amount with leading zeros. So if a dollar amount is 500.02, I would need to update the tables dollar amount to 00000000000050002. Since the dollar amount will change, I will only need the leading zeros for the blank spaces because the field is right justified (for the mainframe).
I have a table and one of the entries requires a 10 digit number. I have added "0000000000" as the format, but in the form to populate the field if I only enter 6 digits it just adds leading zeros.
I have been working in Access 2007 creating a database. For the most part I've been able to figure everything out but I have a field where I'm putting a three digit code. It has an input mask, that is set as a text file, and is "000". I thought that would force all three numbers to show even if there was a zero in front.
However, the leading zeros are being removed and I can't figure out how to make them stay so that I can see them.
I use an append query to insert this new record into the table EVENTS_MAIN.
I wish to set the start time and end time for all event days in hours and minutes. I will use these entries for displaying start time and end time for each event days, to calculate daily total hours and event total hours later on.
Therefore, I wish to create a query that will display event date 1, event date 2 and event date 3, based on the number of the EVENT_total_days field, so I can set the start time and end time for each day separately.
Is it possible to "convert" or "switch" the number of the days into number of records? Can a query convert a field value into number of records?
I have 2 linked tables from 2 different databases, there is a common field in both: “CORP_NBR” I need this field in order to create a join, but the problem is that in one table this field stores leading zeros and in the other table it doesn’t. I can see in design view that this field is text type in both tables. I cannot change field types because I don’t own the objects.
Is there a way or a function that I can add in my join query to ignore leading zeros? :confused:
I currently import data into a table and it it has a text field which looks like this: 12,345.67 GBP...I need to use a query to make this a number field so that I can sum it's contents. I've managed to remove the 'GBP' part but can't seem to get rid of the comma?
I hope someone can help with this one. After many years of using Access for ad-hoc data conversion this has beaten me. I need to produce an ascii text file with fixed column widths, separated by commas, strange I know but the customer is always right. As it is fixed width I have inserted the commas by using a separate column for each one. Numeric columns need to be left padded with zeros. I have constructed a query to do all the column selection and reformatting into a new table which I then export using a fixed length export file spec. Everything works fine except for 3 columns which are calculated by subtracting one column from another. I can get the data to look fine in the output table, the datatype is text, but when I export the table the leading zeros are stripped. This is my expression: String(9-Len(FormatNumber([FULL_FARE_EQUIV]-[TAX_EQUIV],2,0,0,0)),"0") & FormatNumber([FULL_FARE_EQUIV]-[TAX_EQUIV],2,0,0,0). The result in the table is exactly what I want: 000200.00 but when I export it I get a left adjusted 200.00. I've tried using format with a "000000.00" mask which gives the same results. I've tried removing the preceding comma column and including the comma as a prefix using the format mask ",000000.00" and also by concatenation. This looks fine in the table column ,000200.00 but I get an error when I export the table which blanks the column. Error attached.
In my table I have a numerical field for case numbers. Our case numbers are in the format of YYMM000000 (YY = 2 digit year, MM = 2 digit month, remaining 0's are consecutive case numbers). In order to properly list the case numbers in descending order, I have
caseyr: Left([CaseNo],2) (which pulls the first 2 digits being the year) officeno: Right([CaseNo],3) (which pulls the last 3 for our part of the case number)
This was working fantastic until I had to enter cases from 2009, ex: 0911000587
I have set the format for the CaseNo field to 000000000 everywhere it is. It displays the 09 cases perfectly, retaining the zero, however, my left function ignores it. In the case number of 0911000587, it pulls 91 as the first 2 digits. So, in the form that I list my cases in order, the 2009 cases are showing up first (because they're pulling as 91 instead of 09).
Is there anything I can do to force it to NOT ignore the leading zero?
I am trying to create a table for income and expense [catergory] and would like the amount being entered into the [amount] field to have a negative or positive value on entering based on the category chosen.
so in my table I have
[catergory] which is chosen from a look up table ( which is either an INCOME or EXPENSE ) [amount] which is entered in the next field ( which has to return a positive or negative value based on the catergory choosen upon entering the data)
I would like to go one step further and indicate this negative value in red is possible in my FORM.
I have an autonumber field (CarNo). This field is to be displayed as a 5 digit number on the form, ie: 1 is to display as 00001. I know I have done this before (I only use Access once a year or so, so the mind is not fresh on this) I can use a text box on the form because the user can't change the field, but how to display the autonumber as a 5 digit number, including leading zeros. I found the code of Format(FieldName, "00000"), but don't remember where to put it.
My first question is how do I append 00001 so I can have a value for the false side of 9123400001 instead of 912341...My second question is why does it prompt me to enter parameters? It also produces all false values from the if statement...What I am trying to do is use a column that has either a Y or a N and using the if statement to correspond with different formulas depending on the Y or N.This what I have so far.
I use a memo field in a form. This memo field is used to store "steps" for doing something.
To keep things neat, I use ENTER between the steps so there is a blank line between each. This looks good in the form, however... I export this information (from the table) to a CSV/text file to use online. My online script requires that each record occupy only one line. But, the exported file has separated the "steps" into multiple lines just as it appears on the form.
I would like to use the HTML tag <BR> to separate the line feeds in the CSV file. I can enter these in the FORM instead of pressing ENTER, but then the form looks bad - harder to read.