The underlined part (acCmdRecordsGoToNew) is false part of this code, because it copies the Adress Info to a new record, instead of copying it in the same.
-Is there someone that can help me with this problem, to make the copy-button in the Form run properly?
-Are there other options to achieve te same?
I have put in a attachment, to give you guys a visual example of what I mean.
I would like to create a command button on my form that copies values from 5 fields in the current record into a new record leaving all the other fields blank except for the new record ID.
The fields that contain the data that I want copied into a new form are:
I currently have a form for a handover process and am looking to have a button to ideally take a section of inputted information from the form and place this into an email.
I want to copy all these fields from my form, ideally into a new email but if not possible then atleast just to clipboard, is there any way to do this?
I have fields on a form for the Date, the Start time and the Finish time. These won't change for the next 120 records. So, upon opening a new record, I'd like the Date and times to appear there already. But here is the crux: After about 120 entries, the date and Time changes, for the next 120 entries. So, once the 'batch' is finished, or I close access, the values do not need to be remembered until I enter a new record.
I copied something like the following from a book and tried running it with various modifications, just for the Date to start with, but no luck. (It did strike me as too simple for something, clearly, as unbelievably TRICKY as my problem...) I did find quite a few posts on this here but none seemed to work for me, or made sense to me in the slightest. (I did mention that I'm a complete rookie, didn't I?)
Private Sub Acquired_date_AfterUpdate() Me!Acquired_date.DefaultValue = "'" & Me!Acquired_date.Value & "'" End Sub
I am new to access i have a problem which is i have made a form which contains a subform and a read only subreport, what i want is the ability to select a record in read only subreport as in the picture attached and make a button that when i press on it, it should copy the values of the itemsID field, Packing field, ContainerNo field and origin field from the selected record and then paste them in the subform below.
Also i want to add more then one item, so the when i press on another record it should paste the values below the first record.
I have a table and a form that I designed. Now I need to copy all the fields and the design of the form I just created and give it another name so my partner can use the same design and fields, but put in his own information. Is it possible to copy just the design and the fields. If so, how do I do that? Thanks.
I new to VBA and having a few problems with a database I'm working on.
I have a form that contains customer details. The are two sections one for the Registered Office Address and one for the Trading Office Address. I want to be able to allow the user to auto fill the Trading Office Address fields if the Trading Office is the same as the Registered Office.
I'm not sure how the event code should look. I was just going to add a button that will copy the text from the Registered Office Address fields and add them to the Trading Office Address fields. I've tried a couple of other groups but the replies just contain use this code....
TOName = ROName TOAddress = ROAddress etc... for all your fields.
I need a little bit more info on how the event code should look.
Any suggestions on the best code to use would be greatly appreciated.
I hava a small dbase in which we store address information. Now you have a visit address, a mailing address and billing adress.
I want to use some buttons which trigger macro's to fill in these "Secondairy" addresses FROM the visit adress.
So a buttun that says: copy billing address from visit address. and then the street, Number, PO box en city will be copied from the visit address to the billing address.
It's probably possible through a macro but I'm having a hard time coming up with the syntax. Or it there an easier way? :confused:
I am working on a database used in recording device characteristics/test information. The main table of information has dozens of columns for test/part detailed information. When inputing the data for each specific test, many of the info. details are repeated when testing say 20 devices of the same part all at once. Rather than retype every piece of detailed information in every field, everytime, is there an easier way? Does anyone know of a way to make specific fields copy/paste the previous record's information in the fields automatically when a new record is created? Please, if anyone could help or has ANY ideas, let me know...
What I need to do is copy some fields from one table to another after updating via a pop up form.
Explanation:
Form [frmWorkItem subform] and [frmReactiveWorkPoList] are located on a tab control (Tab110, pages 0 and page1) and are linked by [ClientID] to the main form [frmReactiveTracker]. The functionig of this set up works fine.
The process of entering data starts with [frmWorkItem subform], here i use a popup form to enter a new record and when the popup closes the new record is seen in [frmWorkItem subform]. Unfortunately there are five duplicate fields in table frmReactiveWorkPoList which can't be changed now (the result of bad normalisation and now too much work to change it).
The duplicated fields in the newly entered record in [frmWorkItem subform] need to be copied to the respective fields in frmReactiveWorkPoList either when the popup closes or some other more efficient method.
I have attached the sample stripped down database. To start open frmReactiveTracker and pick the third name from the drop down list.
I am running a database in which end users input values into a table via a data access page. The problem is that there are usually lots of records in this table which requires the same value for a particular field.
I was wondering if there is a way to implement something so that the user can input the value once and the value is then copied to all the records?
I have a database and I wish to be able to copy 10 out of about 20 fields into a new record automatically using a command button on a form. Similar to the way the Duplicate button or the Create New button would work but only with these selected fields. None of the fields I wish to duplicate are the primary key. The primary key is an AutoNumber field. After clicking the Save button, the primary key would increment one to confirm the save record.
I've rebooted my copy record button and just used the macro wizard for now, it seems to work as far as I can tell but there is something strange about it.
I've added in some text boxes so I've got some confirmation, but when I click this copy button I get the following error;
"The command or action 'RecordsGoToNew' isn't available now."
I have 2 fields in an MS Access form "BTKForm" sending and picking up data form a bank terminal.
Code is executed by clicking a Button on the form.
Field 1, "IssuerID", is an Unbound field picking up a code from the bank terminal. It's numbers between 0 and 100, representing the Card provider.
Field 2 - "IsID", is a value field linked to a table.
I want to take care of (save) (copy) "IssuerID" in to "IsID".
Code:
Public Sub TransferAmount_Click() Set BAX = CreateObject("BankAxeptSrv.BankAxeptAutomation") If BAX.Connected And BAX.LicenseVerified And Not BAX.BankMode Then Dim amnt As Long Dim cashb As Long amnt = Round(Amount.Value * 100)
I have this access "Database" that contains only one table that I'm trying to make a form for. I want it to allow the user to enter a value for field A and a value for field B then a list of values for field C (which is the key, so each would be a new record all with the same values for field A and field B). I tried to make a multiple item form but when I click on the new row for field C, fields A and B both disappear.
Disclaimer: I know that the creation of a one table database is a mortal sin but that's what my boss gave me and there are already >8000 records with a million mispelled words, so I don't think there's much I can do to make it a relational database without entering each record in again.
I am using MS Access 2010 and I am trying to figure out how to copy a field(s) to another like record. For example I have simple split-form that contains detail items purchased (product number, item purchased, cost, etc). I have a check box call "chkApproved" and date box called "Approved Date". The user have a choice to select the invoice number, once selected the invoice number (there maybe anywhere from one or 2 to 4 rows based from the same invoice number).
The manager will go to the first record and check the "chkApproved" and date is automatically updated as today's date (Approved Date). This is fine if there is only one row, but when you have the same invoice number with 2 to 4 rows the user has to go to each row and check the box. I want to somehow automatically populate the rest of the rows within the same invoice number I don't need to create a new record only updating the existing records.
I have a subform for which I want to loop through all the records and then copy one of the fields for each row into another sub form.
I came up with the bellow code but i get an error when I run it.
The error is an "error 438".
Code is at follows and I am copying the field called price:
Do Until Forms![Roll Out - Site Form]![Roll Out - Sign items pick list].EOF [Roll Out - Sign items added].Form![Price] = [Roll Out - Sign items pick list].Form![Price] Forms![Roll Out - Site Form]![Roll Out - Sign items pick list].MoveNext Loop
I'm new to Access but comfortable with Excel and VBA.I'm trying to transform a VBA-heavy form from Excel into an Access database, as multiple accessing is required, as well as data analysis. The situation is I have a form where users enter data (name, account number, date, etc). The account number is unique, and I have a table of approximately 14000 account numbers which contains the company name, address, and other details for each account number. I've set the account number as the primary ID on the accounts table.
What I would dearly love to be able to do is: when the account number is entered on the form, it is searched for (e.g. by the user clicking a button) from the accounts table. If it is located, the 7 fields in the relevant row are displayed in 7 textboxes on the form. I do not want to record the address, just display it on the form so the user can choose whether or not to use it.
So far, I have found GetRows, which seems to be able to convert the fields into a 2D array... this could be usable. But how can I do the first bit - find the correct row in the accounts table based on the account number entered into the textbox on the form? Is it possible to do this behind the scenes? In other words, Access finds the right row and displays each field in its textbox on the form, without producing a report form first.
I'm trying to create a system where if I enter data into one field it will automatically appear in the corresponding field in another table. For instance if I enter the values 10,12,15 into a field called QID in table A I would like this to appear automatically in a field called QID in table B. Both tables are related and I have enforced referential integrity and 'cascade' options but this still doesn't seem to allow one table to automatically update another. My ultimate aim would be to have a form that you filled in data for the field QID once that then propagated to both Table A and Table B.
ok so I have two forms open: One is a SP Bookings form with a subform SPDetails Query subform. The other form is the not connected/related SP Contacts Query form, to which users enter Full Name weight age ect. Need to copy the names of the new customers Full Name to the Lookup Contact Column in SPDetails Query subform. I got this far, with my trial runs are commented out. The only thing it does when I click on the button is move to new record on Sp Contacts Query Full Name and Copy the previous record. How do I get the button to copy the Full Name from form SPContacts Query.Full Name to the SPBooking Query.subform SPDetails Query Subform.LookupContact
Code: Private Sub Command52_Click() Me.Full_Name.SetFocus DoCmd.RunCommand acCmdSelectRecord
I have a form which has been in use for some time now, and works extremely well for all users; as part of a recent update to that form, I added a few events to various controls; most of them are message box prompts to remind the user to do something, but one is automatic entry of text into a memo field when another field is updated, and it is really this last one that is causing an issue.
There is a command button on the form which has an embedded macro, created using the wizard - it is probably the last, or one of the last few buttons that have a macro as opposed to VBA.
Essentially, when this button is clicked, I would like a duplicate of the current record to be made (thus giving it an Autonumber ID of its own), and if possible I would like this to be done without triggering any of the after update events on the form. Is there a way to disable these events and copy a record in its entirety, re-enabling the events at the end?
I have a form with 2 subforms, each based on their own table. One displays categories of invoices (e.g. rent, electricity, etc.) including some details like monthly costs.
I would like users to be able to select one of those categories and copy this to another table, after which they can enter on what date the invoice was paid, to make a history of payments.
At first I based fields in the history table on fields in the categories table so that you could simply pick a category from a combobox. I had an after update event on that combobox that also automatically set the 'costs' combobox to the matching price.
Worked fine, but had one snag: if I update the costs of a category in the categories table (e.g. the rent goes up) then all the costs in the history table was also updated because the fields got their info from that table.
So now I no longer have field from the history table based on the other table, and want to use 'set value' to copy values from one table to the other. I'd like the user to be able to somehow select a category with a single click on a button, and getting the info for that category copied. However, how can I get access to know from which record I want the fields copied?
Or is there a completely different way to get a history of payments that works much better?
I have a form that i input information into. I have a combo box labeled Addendum, you can select "yes" or "no". What i would like to do is if user selects "yes" then a new record needs to be copied with exact information form original, with the excpetion of a field labeled "tape review #" 1403310000 for example. "-AD" needs to be added to this new record after the review number. Also the field "tape review #" is indexed not to allow duplicate numbers.
I have a main form that has some sub forms on it linked by master child on PK. When I select a new record on the sub forms I want to take a date value from the main form and populate the value into a field in the sub form. How do I do this as I cannot see a new record event on the sub form?
I have a simple data entry form on which there are about 30 to 40 data fields to be update by users. One of the field is called "Stage" which is a combo box with 2 entries "Formal Case" and "Informal Case" with no default value whien a form is first opened.
Users will normally create a data entry which updates the table and save.
However if in future users open any one existing record and try to change Stage field from Informal to Formal or vice a versa I would then like this action to
1) update a time stamp concatinated with the stage change value in a text field perhaps
2) save/close the form
3) open a new form with all the existing entries(plus changed status of "Stage Field") with a new record ID and new time stamp.
I created an unbound text box on a form that automatically pulls the current logged in user by using this:
Private Sub Txtuser_Click() Me.Txtuser = Environ("Username")
The form grabbs the logged in user with no problems, however, I ultimately want this information to also end up in my table. So the form has three boxes (to keep it simple). The user will type their first name and last name manually on the form which the record source is this "table" where their name goes to the table last name =Field 1 and first name=Field 2 respectively. I want the unbound box from the form to place the logged in user in Field 3 for the current record.