Copy Text Fields On Form
Jan 28, 2006
Hi
I new to VBA and having a few problems with a database I'm working on.
I have a form that contains customer details. The are two sections one for the Registered Office Address and one for the Trading Office Address. I want to be able to allow the user to auto fill the Trading Office Address fields if the Trading Office is the same as the Registered Office.
I'm not sure how the event code should look. I was just going to add a button that will copy the text from the Registered Office Address fields and add them to the Trading Office Address fields. I've tried a couple of other groups but the replies just contain use this code....
TOName = ROName
TOAddress = ROAddress
etc... for all your fields.
I need a little bit more info on how the event code should look.
Any suggestions on the best code to use would be greatly appreciated.
Kind Regards
David
View Replies
ADVERTISEMENT
Sep 23, 2005
Hi there,
Can someone help me on this issue?
I want to copy Postal Address Information to Visit Address Information wthin the same record, in my Contact Database that I am building at the moment.
I want to copy 4 fields to 4 other fields within the same Record.
This the current code I use for the Copy-button:
---
Private Sub cmdCopyFields_Click()
Dim v1 As Variant
Dim v2 As Variant
Dim v3 As Variant
Dim v4 As Variant
v1 = Me!Field_a.Value
v2 = Me!Field_b.Value
v3 = Me!Field_c.Value
v4 = Me!Field_d.Value
RunCommand acCmdRecordsGoToNew
Me!Field_e = v1
Me!Field_f = v2
Me!Field_g = v3
Me!Field_h = v4
End Sub
---
The underlined part (acCmdRecordsGoToNew) is false part of this code, because it copies the Adress Info to a new record, instead of copying it in the same.
-Is there someone that can help me with this problem, to make the copy-button in the Form run properly?
-Are there other options to achieve te same?
I have put in a attachment, to give you guys a visual example of what I mean.
Thanks in advance,
Quinten
View 3 Replies
View Related
Sep 11, 2005
I have a table and a form that I designed. Now I need to copy all the fields and the design of the form I just created and give it another name so my partner can use the same design and fields, but put in his own information. Is it possible to copy just the design and the fields. If so, how do I do that? Thanks.
View 7 Replies
View Related
Sep 30, 2013
I would like to create a command button on my form that copies values from 5 fields in the current record into a new record leaving all the other fields blank except for the new record ID.
The fields that contain the data that I want copied into a new form are:
1. Member_Name
2. Member_ID
3. Account
4. UBH/PBH
5. Assigned_WRCA
View 8 Replies
View Related
Jul 8, 2015
My problem is that I want to copy the value of a text-field of form frmSnippet into another text field of form frmChange. But this is not possible, Access tells me that it can't find the form frmChange. But it's there, I checked the name.
My code looks like this:
Const cstrForm As String = "frmChange"
Dim strNr As String
If CurrentProject.AllForms(cstrForm).IsLoaded Then
DoCmd.Close acForm, cstrForm
End If
DoCmd.OpenForm cstrForm, WindowMode:=acDialog
txtSAPNr.SetFocus
Forms!frmChange![txtSAPNr] = Me![txtSAPNr]
Why I get the runtime error 2450?
View 5 Replies
View Related
Aug 31, 2012
I'm new user for access 2010, what i need is to copy some data to a text file from a form?
For example: I have a form have 3 fields, id, user & password;
What I need is to generate a text file for the user field?
View 5 Replies
View Related
May 17, 2015
I created an unbound text box on a form that automatically pulls the current logged in user by using this:
Private Sub Txtuser_Click()
Me.Txtuser = Environ("Username")
The form grabbs the logged in user with no problems, however, I ultimately want this information to also end up in my table. So the form has three boxes (to keep it simple). The user will type their first name and last name manually on the form which the record source is this "table" where their name goes to the table last name =Field 1 and first name=Field 2 respectively. I want the unbound box from the form to place the logged in user in Field 3 for the current record.
View 5 Replies
View Related
Nov 30, 2004
Hi,
I hava a small dbase in which we store address information. Now you have a visit address, a mailing address and billing adress.
I want to use some buttons which trigger macro's to fill in these "Secondairy" addresses FROM the visit adress.
So a buttun that says: copy billing address from visit address. and then the street, Number, PO box en city will be copied from the visit address to the billing address.
It's probably possible through a macro but I'm having a hard time coming up with the syntax. Or it there an easier way? :confused:
I hope you guys can help me out. THANKS!!
View 3 Replies
View Related
Jun 13, 2006
I am very new at Microsoft Access. I have two forms, A and B, that are filled out by two different users. Form A gets filled out first than form B gets filled out. Each has a name box as well as a birthdate box and a few other similar text fields. However, each form also has a few distinctive fields. I was wondering how I could input the common information in Form A to Form B so the user of Form B does not have to spend time retyping the name and birthdates again. In other words, I want to synchronize the similar records between the two forms. I would like the values to appear in a table as well. I would greatly appreciate it if someone could help me with the visual basic code. Thank You.
View 1 Replies
View Related
Apr 27, 2005
I currently have two forms: frmE_SAFind and frmE_SAOrder
frmE_SAFind shows results from a query including fields [txtIDPO] and [dtmDate]
Example:
IDPO Date
btnOpnFrm 6543 2/1/05
btnOpnFrm 5681 1/1/05
frmE_SAOrder shows order details including [txtIDPO] and [dtmDate]
I have a open form command button set up on [frmE_SAFind] that opens [frmE_SAOrder]. Is it possible for me to modify its properties so that when the open form command button is clicked, the order details in [frmE_SAOrder] will represent the order that the user is selecting via the btnOpnFrm command?
Example: If I click btnOpnFrm for 6543, [frmE_SAOrder] will show me PO 6543 details.
Hopefully I made myself clear enough to understand. Thanks for your help!
View 1 Replies
View Related
Jul 9, 2015
I am new to access i have a problem which is i have made a form which contains a subform and a read only subreport, what i want is the ability to select a record in read only subreport as in the picture attached and make a button that when i press on it, it should copy the values of the itemsID field, Packing field, ContainerNo field and origin field from the selected record and then paste them in the subform below.
Also i want to add more then one item, so the when i press on another record it should paste the values below the first record.
View 12 Replies
View Related
Dec 14, 2005
I have tried everything I can think of-
I have a tabular form in Access 2003 that is cutting off the text disply in some text fields.
I am doing some comparisons so the fields are repeated three times.
All three fields are larger than the data.
Two fields display correctly and the third field, identical to the other two, is chopped off on the right side and just shows empty space after the first few letters instead of all the data.
Fields are all the same size in the underlying table.
Changing the format between left, center, right has no effect.
Text size is the same in all three.
All the data is from a single query on a single form.
There is no subform.
All properties for the three are the same.
If I increase the field WAY beyond the required size all the data shows, but I haven't any extra room to do this on the form.
Any ideas would be much appreciated :)
View 2 Replies
View Related
Jun 24, 2013
I have a form with many fields on it. For some reason some of the text in the form fields don't line up vertically with other text even though I have aligned them to the grid and to each other. I have Access 2013.
View 14 Replies
View Related
Jan 10, 2012
is there a way to have a form set to either auto populate fields based on the FIRST FIELD? For example: if the user type in the STUDY ID, the other fields like (first name, last name etc..) are auto-populated/auto-filled? and if the STUDY ID is new and not in the table, then the users simply fill in all the fields/complete the form and save? And I would also like a message box to show when I am typing the STUDY ID that would say something like: this person is on the system already. Click YES for this person and NO to add the user?...
View 2 Replies
View Related
Nov 12, 2014
What I need to do is copy some fields from one table to another after updating via a pop up form.
Explanation:
Form [frmWorkItem subform] and [frmReactiveWorkPoList] are located on a tab control (Tab110, pages 0 and page1) and are linked by [ClientID] to the main form [frmReactiveTracker]. The functionig of this set up works fine.
The process of entering data starts with [frmWorkItem subform], here i use a popup form to enter a new record and when the popup closes the new record is seen in [frmWorkItem subform]. Unfortunately there are five duplicate fields in table frmReactiveWorkPoList which can't be changed now (the result of bad normalisation and now too much work to change it).
The duplicated fields in the newly entered record in [frmWorkItem subform] need to be copied to the respective fields in frmReactiveWorkPoList either when the popup closes or some other more efficient method.
I have attached the sample stripped down database. To start open frmReactiveTracker and pick the third name from the drop down list.
View 11 Replies
View Related
Aug 8, 2006
Please bare with me as I am an Absolute Access VB code novice . I have a Form in my Access DB and I found the Following code on this site and placed it behind my search button :
Private Sub SearchButton_Click()
DoCmd.OpenReport "All users", acViewPreview, , "[AUP].[First Name] = '" & Me.[Text34] & "'"
End Sub
The Search works great but only searches on the 1 Field "First Name" . How would I expand the VB code to include another 2 fields within my table . ( the other 2 fields I want to serach appear on the Form ) .
View 4 Replies
View Related
May 25, 2005
I have 2 forms which are based on separate tables. When I open Form2 from a command button on Form1, I would like the common boxes on the Form2 (name, ID #, ets.) to automatically copy the info from the boxes on Form1 with the same names. How can I do this? TIA
View 5 Replies
View Related
Dec 7, 2007
Hello! I need some serious help! After 25+ years of using Paradox where I work, we are going to Microsoft Office and Access is stumping me on one thing!!! In paradox you could hit Ctrl+D and it would enter the same information as in the cell directly above. I can't find anything that shows that Access has a feature like this. I have our inventory database and I will enter maybe 25 of the same items, but they have different property numbers and locations only. How do I get it to repeat what is in the cell/row above?
View 6 Replies
View Related
Jun 20, 2006
Hello,
I am running a database in which end users input values into a table via a data access page. The problem is that there are usually lots of records in this table which requires the same value for a particular field.
I was wondering if there is a way to implement something so that the user can input the value once and the value is then copied to all the records?
Many thanks in advance
View 1 Replies
View Related
Dec 12, 2006
I have a database and I wish to be able to copy 10 out of about 20 fields into a new record automatically using a command button on a form. Similar to the way the Duplicate button or the Create New button would work but only with these selected fields. None of the fields I wish to duplicate are the primary key. The primary key is an AutoNumber field. After clicking the Save button, the primary key would increment one to confirm the save record.
Any help or suggestion would be appreciated!
Thanks!
View 3 Replies
View Related
Aug 6, 2013
I have fields on a form for the Date, the Start time and the Finish time. These won't change for the next 120 records. So, upon opening a new record, I'd like the Date and times to appear there already. But here is the crux: After about 120 entries, the date and Time changes, for the next 120 entries. So, once the 'batch' is finished, or I close access, the values do not need to be remembered until I enter a new record.
I copied something like the following from a book and tried running it with various modifications, just for the Date to start with, but no luck. (It did strike me as too simple for something, clearly, as unbelievably TRICKY as my problem...) I did find quite a few posts on this here but none seemed to work for me, or made sense to me in the slightest. (I did mention that I'm a complete rookie, didn't I?)
Private Sub Acquired_date_AfterUpdate()
Me!Acquired_date.DefaultValue = "'" & Me!Acquired_date.Value & "'"
End Sub
View 7 Replies
View Related
Mar 30, 2007
I want a help on this complicated issue:
On running a select query with "a*" of names in a table:
Results are : America, Argentina
Now I want this to dynamically create 2 text fileds in a form and fill America &".snp" in first and Argentina &".snp" in 2nd filed.
It is not regarding subform to display data of query result.
This I am going to use to add attchment for outlook email session as being discussed in my Email from access with attachment thread.
View 2 Replies
View Related
Feb 11, 2014
I need to copy all text from all textbox to one text box.
View 14 Replies
View Related
Apr 10, 2013
I currently have a form for a handover process and am looking to have a button to ideally take a section of inputted information from the form and place this into an email.
IncidentReferenceNumberName1
DescriptionSignificant1
ActionTakenSignificant1
CurrentStatusSignificant1
TimeLoggedSignificant1
TimeResolvedSignificant1
NumberofcallsreceivedSignificant1
Are my fields, this goes up to 4.
I want to copy all these fields from my form, ideally into a new email but if not possible then atleast just to clipboard, is there any way to do this?
View 7 Replies
View Related
Apr 21, 2015
I have 2 fields in an MS Access form "BTKForm" sending and picking up data form a bank terminal.
Code is executed by clicking a Button on the form.
Field 1, "IssuerID", is an Unbound field picking up a code from the bank terminal. It's numbers between 0 and 100, representing the Card provider.
Field 2 - "IsID", is a value field linked to a table.
I want to take care of (save) (copy) "IssuerID" in to "IsID".
Code:
Public Sub TransferAmount_Click()
Set BAX = CreateObject("BankAxeptSrv.BankAxeptAutomation")
If BAX.Connected And BAX.LicenseVerified And Not BAX.BankMode Then
Dim amnt As Long
Dim cashb As Long
amnt = Round(Amount.Value * 100)
[Code] .....
View 12 Replies
View Related
Jul 17, 2015
I have this access "Database" that contains only one table that I'm trying to make a form for. I want it to allow the user to enter a value for field A and a value for field B then a list of values for field C (which is the key, so each would be a new record all with the same values for field A and field B). I tried to make a multiple item form but when I click on the new row for field C, fields A and B both disappear.
Disclaimer: I know that the creation of a one table database is a mortal sin but that's what my boss gave me and there are already >8000 records with a million mispelled words, so I don't think there's much I can do to make it a relational database without entering each record in again.
View 4 Replies
View Related
