Count Blank Fields Then Output Result To Form
Mar 18, 2007
Hi Have scoured the forum and have found people with a similar problem, but I just can't seem to get my head round this.
Basically I have a table with various fields, one of these fields is a sign off field where the user enters their name once the record has been reviewed.
I want to count all the records that do not have a name entered in this particular field thus are null/blank. I then want this figure to appear on a form thus representing the total number of records still to be reviewed.
I have tried doing this with various methods with no joy.
Any help would be much appreciated.
View Replies
ADVERTISEMENT
Jan 29, 2014
I have a totalquery that runs fine and give me the sum for both fields I'm looking for but I can't get the outputs to fill the fields on the form. I have tried the Dcount query in the control source but that just returns an error and locks up access.
Code:
SELECT [Tble-wcDelays].Causedby, Sum([Tble-wcDelays].HoursDelay) AS SumOfHoursDelay
FROM [Tble-wcDelays]
GROUP BY [Tble-wcDelays].Causedby, [Tble-wcDelays].LinkingID
HAVING ((([Tble-wcDelays].LinkingID)=[Forms]![Frm-ePlusCent]![cleanID]));
That is the query.
View 14 Replies
View Related
Aug 18, 2013
I want to add a number to my results within a query depending on the month and how many results. For example I have 10 results in my query 3 from January, 5 from March and the rest from April. The 3 from January would be 1,2,3. The five in March would be 1,2,3,4,5 and so on. Is it possible to do?
I'm using access 2003.
View 4 Replies
View Related
Aug 23, 2006
i'm a begginer at access, so please excuse me if this question is very basic.
i have a multiple table select query which shows me which user has which piece of a equipment at that given time.
I also have a form that logs any problems the users have with the equipment, what i want that form to do is show the results of the query based on inputting the users name. ie put the serial number and model number into the relevent fileds on the form.
I can get the form to run the query but that just shows it in the query window, i need it to show on the correct feilds on the form.
Hope that makes sense and that somebody can help me.
Cheers
Burty
View 9 Replies
View Related
Feb 12, 2006
How do I make a form open with blank input fields?. The one I made always has a prior record displayed.
View 1 Replies
View Related
May 21, 2007
I have a form where a user reviews information input by another user, once they have done this they sign it off by selecting their name from a drop down list. On this form there is a scrolling message which tells the user how many un-signed entries there are. This works fine until there are 0 (zero) entries to be signed off.
The scrolling message is linked to a count query which basically counts any records that does not have a name entered in the required field. I have done this with ' Not Like "*" '
Like I say it works when there is one or more entries to count, but as soon as there are none the query does not output a zero it is just blank. This is the problem.
I need some sort of statement to say if there are no matching records please display a zero.
Any help would be much appreciated!
View 1 Replies
View Related
Dec 16, 2014
I have a query that contains Invoices(usually 2 line items per invoice) Taxable and NonTaxable. I need to able to basically export it to excel on multiple worksheets when the Amount of unique invoice number reaches 15.
From all my scouring on the internet I can't find anything with this criteria.
View 2 Replies
View Related
Oct 7, 2004
Hey Guys,
This one could be a tough one.
I have a form that displays products information.
The products table has about 30 fields but not every field is used in every record.
Depending on the product I would like those fields that are blank not to appear on the form and then for the form to be reorganized so there are no odd spaces.
Is this possible?
Thanks!
View 5 Replies
View Related
Mar 15, 2006
Hello guys
How can get blank fields on opening or loading my form?. I don't want to prevent data entry option.
Please help me
Thanks:)
View 14 Replies
View Related
Jul 10, 2006
I have a form linked to an employees table. I have a search function on this form which allows you to search for a particular employee.
At the moment when i open my form, it always displays the first record!
How can I make my form open with blank fields instead of the first record showing?
Thanks alot.
Regards,
Amber
View 14 Replies
View Related
Dec 4, 2014
I have a form with a query assigned to it . it has also some controls to filter the data when i filter the data and there are any relevantr data for the results the form shows nothing for the query and it's true but the controls will be disappeared and i have to go out from the form and come in again to be able to filter the query again.
View 3 Replies
View Related
Sep 7, 2013
I have a [Order Central table] that compiles products from four different categories that employees can order from.
Employees using the database will select from four categories on buttons which opens up the order form EX: [Category 1 form].
They enter their order info on [Category 1 form] into a subform sourced from [Category 1 Table] called [Category 1 subform].
Is there a way that they could select the "Category 1" button, which would run a macro opening [Category 1 form] with the [Category 1 subform] having a where condition of 1=0 (or just so that the subform appears blank)?
View 7 Replies
View Related
Mar 20, 2007
I have a query linked to some combo/txt boxes on a form so the user defines which categories he/she is looking for then presses button and query comes up with relevant results. This works fine if the user inputs information that is actually there, but if they leave it blank it goes all wrong.
The statements I have in the query are as follows:
[Forms]![frmStockControlSigned]![comboSupplier]
[Forms]![frmStockControlSigned]![txtPurchaseOrder]
etc.
I thought the solution may be along the lines of this but it does not work:
=if([Forms]![frmStockControlSigned]![txtDate]=Null,[Forms]![frmStockControlSigned]![txtDate],"*")
basically i want to make it so the user does not have to enter criteria into evey box, thus if every search box is left blank it would show all records "*"
View 2 Replies
View Related
Nov 14, 2013
I'm creating a search form to filter out data based on certain inputs. My VBA code looks like:
Code:
Private Sub Command18_Click()
On Error GoTo errorcatch
Me.Filter = "([Experiments.Log] Like ""*" & Me.Text21 & "*"") AND ([Expdate] Like ""*" & Me.Text22 & "*"") AND ([BaseSolution] Like ""*" & Me.Text24 & "*"") AND([AddCom] Like ""*" & Me.Text25 & "*"") AND ([Test] Like ""*" & Me.Text26 & "*"") AND ([Plan] Like ""*" & Me.Text23 & "*"")"
Me.FilterOn = True
Exit Sub
errorcatch:
MsgBox "Error #: " & Err.Number & vbCrLf & vbCrLf & Err.Description
End Sub
However, the output does not include records where other fields are blank. I have read that I may need to use Is Null but am not sure how to.
View 3 Replies
View Related
Jan 20, 2015
I have a form with various text, date and combo controls. There is a button at the button that runs a macro (Close NB) at the bottom. What I'm trying to do is bring up a msgbox if certain fields are blank and not run the macro. I only want the macro to run if all the fields specified have data in them.
The fields are :
cmb_cliname
cmb_disease
cmb_projectType
cmb_ProposalStatus
The on click code is:
If (Me.cmb_cliname Is Null) Then
MsgBox "Please fill in the relevant details",
ElseIf (Me.cmb_Disease Is Null) Then
MsgBox "Please fill in the relevant details"
[Code] .....
View 6 Replies
View Related
Jul 21, 2006
Is it possible to have a count of all records matching a certain criteria displayed on the form?
I have to schedule customers for certain dates but never know how many have been scheduled by date while in the form. I am not sure how to reference the field from the table to be counted. I have several unbound boxes with:
=date()&" "&{XXXX}([SCHEDULE DATE]=date()
=date()+1&" "&{XXXX}([SCHEDULE DATE]=date()+1
=date()+2&" "&{XXXX}([SCHEDULE DATE]=date()+2
etc.
not sure what to use for {XXXX}
As always, any help is appreciated.....
Someday I will contribute some answers instead of questions.....
View 1 Replies
View Related
Jul 31, 2006
Hi Folks
More questions from the newbie :eek:
I have a very simple table with a field that will have only the values open or closed
I created a query based on this table and used the count function (to count open or closed cases) and in the next querie field I used the group by open.
This gives me a count of all open cases
I can do the same for closed cases.
I want this count to be displayed on a Switchboard form but i cant get my nehad round how to get it there.
Can anyone help me out ?
Many thanks
Jimmy
View 6 Replies
View Related
Mar 25, 2013
When entering information into a blank form, I would like to be able to continue entering information to another additional blank form after my last entry. Is there a way to continue to a blank form after entering information into the previous blank form? I would just like to continue without having to close the entire form and then reopening another form.
View 7 Replies
View Related
Jul 21, 2013
I want to return the number of record with the SQL search in MS Access. I am using the following code, the expected result will be a value. But somehow, it does not give any result.
StrSQL = "SELECT COUNT(*) FROM table1 WHERE [Condition]='A' "
How do I return the count value with the search?
View 3 Replies
View Related
Aug 8, 2013
I am trying to count rows in the result of one of the queries and I am having a bit of trouble getting it going.
The current code - this is executed as on-click event when clicked on List Box feed with query below.
What I want to add is simple if that when number of rows produced by the querry is 1 it will enable a picture item in the different part of the form, however it does not want to count the rows for me.
Code:
Private Sub search_items_Click()
Me.OBSFullFilledOrdersHolder.Enabled = True
mysql = "SELECT orders.[order id] , STUDENTS.[first name]& ' ' & students.[surname] AS Name, students.[contact name] AS ContactName , ORDERS.[Online Bookshelf order] AS OBS , STUDENTS.[Delivery Address 1], STUDENTS.[Delivery Address 2], STUDENTS.[Delivery Address 3], STUDENTS.[Delivery Address 4]"
[Code] ....
The query itself works when tested but when used in code with DCount function will return error: Run-Time 2471 the expression you entered as query parameter prouced this error
'[Forms]![FULLFILL ORDERS]![search items].[Column(0)]'.
View 5 Replies
View Related
Oct 15, 2007
I know I am being particularly stupid, but I can't work out how to do the following:
I have a table in which is recorded information about orders for customers. These fields are for orders of meat and poultry. As customers may wish to order more than one Turkey, I have created three fields called Turkey, Turkey 2, and Turkey 3. The data that is input is the weight of the Turkey e.g. 22 (lbs), 16 (lbs).
When it comes to ordering the turkeys, I need to produce a report which shows, by weight, the number of turkeys needed. This will need to add the number of turkeys in each of the 3 fields and order them by weight.
I've just got lost, trying to work out whether I base my report on the table or on a query based on the table. Help!!!
View 2 Replies
View Related
Jul 20, 2005
It has been a while since I last used Access, recently I've used mySQL and PHP.
First a little description of what I'm trying to accomplish:
I have three tables...
tblImport - has the fields: TestID(PK), i001, i002, i003, i004 ... i025
Note: i00# field contains the multiple choice answer (i.e. 1,2,3,4,5) as imported from a CSV file.
tblStudentAsr - has the fields TestID(PK), StudentID(PK), 001, 002, 003 ... 025.
Note: 00# containes the multiple choice answer (i.e. 1,2,3,4,5) as enterd by the student.
tblResult - TestID(PK), StudentID(PK), a001,a002, a003 ... a025.
Note: the fields a00# have the datatype set to "yes/no"
What I'm trying to do is compare the answers in tblImport to the answers in tblStudentAsr then output the result to tblResult .
Here is some dirty pseudocode:
if i001 = 001 then
INSERT 1 INTO tblResult
else
INSERT 0 INTO tblResult
The above example gets a little repetitive since I would have to do that for each question.
Is it possible to put the answer fields of each table into a recordset then compare them?
(I have heard that using rs's can be a little slow. Although there is only a max of 25 questions the number of students can be quite large)
Alternativly, can I accomplish this using only SQL statements?
What would be the best way to attack this?
Any suggestions (or alternate suggestions) would be greatly appreciated.
Thanks,
salmonman
View 6 Replies
View Related
Oct 19, 2005
After reading many of the posts here, I decided that one of the problems with the tables in the db I was working on was in the primary keys. I had used the same field name as the primary key in all of my tables. This was RecipID, which was a user entered textbox with an example in a label beside it showing the format to use.
After reading stuff here, I decided this wasn't a good idea. So I changed RecipId to be an autonumber in the parent table (Household_Info) and a long integer foreign key in the children. Also, I added some fields to the parent table to identify the head of household (lastname, firstname)
I already had a continuous form made with a subform and a pop-up form associated with it based on my previous tables. Reran the query underlying the form, and the new fields showed up in the field list box for the form. The fields are all still present in design view, but I get a totally blank form in form view. I checked the forms recordsource and made sure that it was set to the new query.
Can anyone give me an idea about what I'm overlooking? Do I have to recreate the form?
(Sorry if this is a repeat of a question someone has already addressed, but I couldn't turn up any relevant threads after several hours of searching.)
Thanks, Charlotte
View 11 Replies
View Related
Mar 16, 2013
Query is based on 1 table" tblTimeCnv_AgeGroups
Fields:
AgeGroup Time Ranking
30-& under 11.22 1
30-& under 10.41 2
30-& under 9.22 3
30-39 11.32 1
30-39 9.53 2
30-39 9.34 3
30-39 9.30 4
See attachment
My Ranking field is:
Ranking: DCount("*","[tblTimeCNV_AgeGroups]","[AgeGroup]=" & [AgeGroup] & " and time <= " & [time])
In the Ranking column the result is: #error in the first 3 rows then zeroes
View 3 Replies
View Related
Nov 15, 2005
I looked thru the forums and didn't seems to get what I needed;
I want a count query to give me all fields in "group by" column, and assign 0 to where there are no count for certain fields.
I tried to set Outputallfield to "yes" but got an error message saying that there is a data type mismatch. The query ran just fine when outputallfield was set "no" and gave right results.
Can anyone help, please?
View 14 Replies
View Related
Nov 18, 2013
I have a list of employees and sort criteria. for example
empID....Criteria
1234......T
1234......F
1234......T
1234......F
1235......F
1236......T
1236......F
1236......F
1236......F
1236......T
1236......T
1237......F
The output I am looking for is a count of the number of times T appears by an employee, BUT is there is no record it would return 0
E.G.
empID......Count
1234...........2
1235...........0
1236...........3
1237...........0
I can get it to return:
empID......Count
1234...........2
1236...........3
using Count and the criteria Where Criteria="T" but not returning zeros.
View 2 Replies
View Related
