Count If In Access ??
Apr 3, 2006is it possible to Count If in Access ??
i have two coloums of data and i wish to count 1's form both columns and then 1 from one and 2 from the other and so on. is this possible ??
Many Thanks
Benn
ADVERTISEMENT
Running Count In Access
May 17, 2007I am trying to count records in a running sum fashion in a QUERY and for the records to restart when the field changes. I tried DCount without success.
ie. if a field contained the following data
Code Running Count
C101 1
C101 2
C103 1
C103 2
C103 3
C104 1
C104 2
Thanks
MS Access-Show Occurence Count
Oct 5, 2005I have a query about how to display count, where
source is from two different columns, like example
SNo State State1
1 Florida Florida
2 California Florida
3 Florida Ohio
4 Florida Nebraska
5 Washington Washington
6 Florida Florida
I want the query to return
STATE OCCURENCE
Florida 7
Washington 2
California 1
Ohio 1
Nebraska 1
Above, in two separate columns
Please help
Sunny
Using The Count Function In Access Queries
Mar 13, 2007Hi
I have a table which has information the count of students in classrooms around the university and I need to summarize the table by Faculty. Therefore, all I want to do is a count of students for each faculty i.e. Art and Design, Business and Law etc.
The query i put together is: SELECT Count([tbl_Audited Classroom for Week 02].Faculty) AS CountOfFaculty
FROM [tbl_Audited Classroom for Week 02]
HAVING (((Count([tbl_Audited Classroom for Week 02].Faculty))="BAL"));
So when I run the query I get the error message 'Data Type mismatch in criteria expression'. The Faculty field is a text field, so I don't know if that would make a difference.
Can you please help?
thanks
Count Function In Access Query.
Apr 11, 2007i'm trying to count the total number of records found for this query. i used the following expression (code) in the QED field row Total Incidents: Count([IncidentID]) which, result in an error message.
Can sum1 help me solve this problem. any help would be highly appreciated.
Record Count For Calculation In Access
Dec 17, 2004I need to be able to count the number of records in a report table in order to perform a calculation. For example record count/ total.
Thanks
Queries :: Access Chart Order By Count?
Mar 8, 2014I have a query that Counts the number of times a model number is used. I use totals and the count function under total to get that count. I have the top 10 models used and the query returns my information correctly but. When I make a form or report and place a chart in that uses this query, the results are in alphabetical order not in the order of usage. I need my chart to either go from descending or ascending order of usage and not by alphabetical order of the model number or name. What am I doing incorrectly? It seems like the chart would display the same way my datasheet would in the query.
Here is my sql statement.
SELECT TOP 10 Count(tbl_Closed_Jobs.OEM_Model) AS CountOfOEM_Model, [OEM] & " " & [Desc] AS Expr1, tbl_Closed_Jobs.Desc
FROM tbl_Closed_Jobs
GROUP BY [OEM] & " " & [Desc], tbl_Closed_Jobs.Desc, tbl_Closed_Jobs.OEM_Model, tbl_Closed_Jobs.OEM, tbl_Closed_Jobs.Plant
ORDER BY Count(tbl_Closed_Jobs.OEM_Model) DESC;
Modules & VBA :: Using Access Of Count Worksheets Loop
Mar 10, 2015I would like Access to open an Excel file count the worksheets and then give each tab the name of the column heading in cell A1 of each worksheet. I had no problem with the code in Excel but when I tried to add it to Access I am getting an error on the WS_Count = obj.ActiveWorkbook.Worksheets.Count line. The error message is "Object variable or With block variable not set".
Here is the code:
Code:
'This block of code will cycle through each tab and name them
Dim WS_Count As Integer
Dim I As Integer
[Code]....
Queries :: Distinct Count In Access 2010?
Jul 15, 2015I'm trying to write a query to get a count of Volunteers under a certain Job Code for a given year - problem comes in that a single Volunteer may record hours multiple times under a Job Code in a given Fiscal Year. I can't seem to get "Unique Values" to work. From my research it looks like I need a two-part query but (as a newbie) I'm not quite sure how to write that. I have two queries, one that works and one that doesn't.
This one counts total amount of hours volunteered under a given Job Code, it works:
Code:
SELECT tblHoursWorked.FiscalYear, tblHoursWorked.JobCodeLookup, Sum(tblHoursWorked.HoursWorked) AS [Sum Of HoursWorked]
FROM tblHoursWorked
GROUP BY tblHoursWorked.FiscalYear, tblHoursWorked.JobCodeLookup;
HAVING (((tblHoursWorked.FiscalYear)=[Enter Year:]));
This one attempts to count number of Volunteers that worked under each Job Code in a given year - it instead counts number of entries under that job code. What I think I need to do is count unique instances of the NamesIDFK, but I can't seem to get that to work.
Code:
SELECT DISTINCT tblHoursWorked.[JobCodeLookup]
FROM tblHoursWorked
GROUP BY tblHoursWorked.[JobCodeLookup];
1) correcting my second query and 2) putting them into one query so I can use them in a report.
Queries :: Want To Count Records In Progressive Access Table
Oct 17, 2013i want to count records in progressive access table .in simutanasly column like excel "countif" function if Attached File
Column A Column B
A Count (A) =1
A Count(A)= 2
A Count (A)=3
B Count (B) =1
B Count (B) =2
A Count (A)= 4
Queries :: Access 2007 / Query Count Of Unique IDs
Jan 16, 2014I have a basic query off a currency table :
Quote:
SELECT tblCurrencies.CcyID, tblCurrencies.Ccy
FROM tblCurrencies
ORDER BY tblCurrencies.Ccy;
Now - I have a separate table of balances, which is linked to the currency table by the same CcyID, and which also has identifiers to link it to other tables (e.g. AccountID)
As part of the above query, I want to return the count of unique AccountID's in the balance table for each currency. So in other words, I want to know, for each currency, how many unique accounts exist?
Each AccountID could appear one or more times in the balance table (one-to-many relationship), so I only want to count the number of unique ID's.
So I started with the following :
Quote:
SELECT tblCurrencies.CcyID, tblCurrencies.Ccy, Count(tblBalances.AccountID) AS NoOfAccounts
FROM tblCurrencies INNER JOIN tblBalances ON tblCurrencies.CcyID = tblBalances.CcyID
GROUP BY tblCurrencies.CcyID, tblCurrencies.Ccy
ORDER BY tblCurrencies.Ccy;
But this just gives the number of AccountID's per currency (regardless of duplication within them)
I found this article which informs me that a Count(Distinct) query won't work in Access and to use subqueries instead.
General :: Count Number Of Record With SQL Result In MS Access
Jul 21, 2013I want to return the number of record with the SQL search in MS Access. I am using the following code, the expected result will be a value. But somehow, it does not give any result.
StrSQL = "SELECT COUNT(*) FROM table1 WHERE [Condition]='A' "
How do I return the count value with the search?
Modules & VBA :: Access 2010 And ADODB Recordset Count
Nov 24, 2013I opened a 2007 Access db in Access 2010. This DB worked perfectly in Access 2007, but when I opened it in 2010 my recordset.recordcount no longer works.
This is what I have:
rsGetInst was previously defined
Dim intInstCount as integer
Dim rsGetInst As New ADODB.Recordset
rsGetInst.CursorLocation = adUseClient
rsGetInst.CursorType = adOpenDynamic
rsGetInst.LockType = adLockOptimistic
rsGetInst.open "Select * from tblInstruction where CustID = " & intCustomerID
intInstCount = rsGetInst.recordcount
At this point a get a "type Mismatch" error, and it is happening in all my recordsets recordcount.
Is there a command or reference that needs to be change when using Access 2010. When I compared the references the only difference is that in 2007 we reference Microsoft Access 12.0 Object Library and in 2010 is Microsoft Access 14.0 Object Library.
Count Number Of Times A Value Appears In A Column Using MS Access
Oct 9, 2014I would like to count the number of times a value appears in a column using Ms Access
E.g.
Name Count
Mike 2
Paul 1
Mike 2
Peter 1
Modules & VBA :: Count Incrementally Each Duplicate Column Value In Access Query
May 30, 2014I have a query where I need to incrementally count the repetition of column values and add that value in a new column.
Example:
"Column One" and "RepeatCounter" are fields in a query.
Column OneRepeat Counter
Value 11
Value 21
Value 31
Value 12
Value 13
Value 32
I want to create the outcome in the field "Counter" in an Access Query. I am a novice in Access VBA. I found I can do it in Excel with the formula CountIF. I am unable to do it in Access.
Queries :: Drop Down Access Standard Menu To Place Count Command
May 29, 2014I have been using a table with queries with no problems. Now the queries wont recognize the last two records of the table when doing a Count. there are no null or empty spaces. I am using the drop down access standard menu to place the "Count" command. Is there a solution to this problem ?
View 3 Replies View RelatedReports :: Access 2003 - Count Values Over Specific Amount In Report
Mar 16, 2013In Access 2003 I have a form, at the footer of which I want to put some summary information. One of which is a count of the number of purchases over £500. I have tried many variations after searching the posts on this site but the only one which does not return me an error of some kind with the expression is
=IIf([Bought For]>"500",Count([Bought For]),0)
where 'Bought For is the reports listing of the purchase prices in a given date range when opening the report, but the value returned in my test is '0' when it should be '2' as the test file has two purchases of over £500.
Count Records Problem. Display Field Even When Count Is Zero.
Apr 13, 2006I have a table tblBookings.
In this table it has a bookingID, CustomerID and some other none relevant details.
The CustomerID comes from table tblCustomer. i.e a customerID must exist in the customer table to be allowed in the bookings table tblBookings
A customer can exist in tblCustomer without existing in the booking table.
I am trying to write a query that will list each and every customer ID in the tblCustomer and count the number of bookings that that customer has (even if it is zero).
I have a query that will count the bookings if they exist in the booking table and display the number of times that a customer appears in the bookings table.
SELECT tblBookings.CustomerID, Count(tblBookings.CustomerID) AS NoOfBookings
FROM tblBookings
GROUP BY tblBookings.CustomerID;
How do I create a query that will do this but list all customers even if they don't exist in the bookings table (but obviously occur in the customers table)
I am trying to create a similar query where all bookings per hotel are listed even if no bookings are made for that hotel. I am guessing the answer is the same as above.
The Ritz. Bookings 0
The Hilton. Bookings 3
The Carlton. Bookings 0
The Lowry. Bookings 2
For every hotel.
That kind of thing.
If you need more information please shout.
Queries :: Using Count And MIN Together To Retrieve Only MIN Record With Count
Aug 16, 2015I have a table that has 5M+ accounting line entries. Below is an example of one accounting journal in the table.
BUSN_UNIT_IJRNL_DJRNL_ICNCY_CMONY_A
CB0014/07/20140002888269323AUD16797
CB0014/07/20140002888269323AUD-16797
CB0017/07/20140002888269323AUD16797
CB0017/07/20140002888269323AUD-16797
The journal ID above was an accounting entry, debit $16,797 and credit $-16,797. because it was entered as a reversing journal in the system, the table has captured the Journal ID with 2 dates. For my purpose i only want the one date (MIN) date, the total amount of the journal (either the debit or credit amount 16,797) and the total number of lines the journal ID has so in this instance I want the count to be 2 and not 4.
Right now this is what i get
BUSN_UNIT_I JRNL_I CNCY_C SumOfMONY_A CountOfJRNL_I MinOfJRNL_D
CB001 0002888269 AUD 0 4 4/07/2014
This is the output i would like
BUSN_UNIT_I JRNL_I CNCY_C SumofMONY_A CountofJRNL_I MinOfJRNL_D
CB0010002888269323 AUD16797 2 4/07/2014
Im thinking with the total sum because theres debits and credits is there a way to do the absolute value of the journal MONY_A then divide by 2?
current SQL
SELECT [One Year Data Lines].JRNL_I, [One Year Data Lines].CNCY_C, Count([One Year Data Lines].JRNL_I) AS CountOfJRNL_I, Min([One Year Data Lines].JRNL_D) AS MinOfJRNL_D, [One Year Data Lines].BUSN_UNIT_I, Sum([One Year Data Lines].MONY_A) AS SumOfMONY_A
FROM [One Year Data Lines]
GROUP BY [One Year Data Lines].JRNL_I, [One Year Data Lines].CNCY_C, [One Year Data Lines].BUSN_UNIT_I
HAVING ((([One Year Data Lines].JRNL_I)="0002888269") AND (([One Year Data Lines].CNCY_C)="aud"));
Count Of A Count Or Sum Of A Count? Newbie Needs Some Help.
Sep 20, 2005Hi,
Just spent the past hour in here trying to nut this one out, but not sure I've found something quite the same...though I know the answer will be painfully simple.
I have a customer table and a product table, and a query that groups customer first and last names along with a count of products per customer e.g. 1,1,3,2,3,4,2,1 indicates customer A buys qty 1 of product z, customer B buys qty 1 of product x, cust C buys qty 3 of product y and so on.
All I need to do now is do something to also output the total number of products. ie as per example above, 1+1+3+2+3+4+2+1 to get 17.
Can I do a count of the count or do I do some sort of sum of the count results?
I've tried everything I'm capable of as a newbie, and I'm not having any progress.
Any help appreciated.
Can I Do A "[Count] = [Count] + 1" In The Reports???
Sep 5, 2006Hi all,
Do someone have a way to do a count function in a Reports to let the report showing the details at the same time do the accumulating of the number??
I had try so many way but it not work~~!!! Pls i need someone help cause i stuck my report there without the accumulating of the number, Thanks.
Regard,
alex
Count
Sep 12, 2006I having trouble trying to figure out how i can get totals in a report, the report picks the information up from a query i have set up. The report shows various data to do with Grades awarded as part of an audit process (1-4), i want to put a total in the report to count how many 1's, how many 2's etc. i not very experienced with access so can anybody help me with this.:confused:
View 1 Replies View RelatedHelp Using Count
Sep 10, 2007So i have 2 fields(124816 records)
IMKEY, DOCBREAK
IMKEY is like an ID. And docbreak is like a page counter, where some records are empty and some arent(seperated by D's and some C's). im trying to find out 2 things
1> Count how many values are within each group in DOCBREAk.
example:
DOCBREAK DOCCOUNT<--trying to figure out
D 3
<EMPTYREcord>
<EMPTYrec>
D 1
D 4
<EMPTYrec>
<EMPTYrec>
<EMPTYrec>
C 1
I tried this query, but it counts everything, i just want to count how many values are within a group(C's and D's
Select COUNT(DOCBREAK) from Jan003;
in excel, i could of done it, but since excel has a limit how many rows it can support, i had to do it in ACCESS...
2>in the IMAGEKEY column, since DOCBREAK seperates and makes groups, im trying to as well get the beginning number and the ending number(1st and last number).
ex
IMAGEKEY Beg End
1 D 1 3
2
3
4 D 4 4
5 D 5 8
6
7
8
9 C 9 9
i did it in excel, but then again, for my personal use, i would like to know how to do it in access
heres how i got the 1st number in excel(A=imagekey, and B=Dockbreak)
=IF(B1="D",A1,"")
end number (C=DOCCOUNT)
=IF(C1="","",OFFSET(A1,C1-1,0))
can anyone help me out??
Count = 0
Apr 20, 2006I have 11 sites and I'm trying to missed visits at each site.
Currently I'm counting all non-missed visits at the site, and in the report I'm subtracting that number from Total # of patients at the site. This works fine - but there has to be a solution to the more "direct" method described below.
If I count up the actual missed visits and one site does not have any, the result only shows 10 sites and their totals. If the total count of missed visits = 0, is there a way to have access return that result?
I've tried changing the join relationship, inserting IF ([CountOfDay 30 Missed]) Is Null (or is 0) THEN .....
I know my naming conventions suck - I'm learning as I go, and I'm afraid to go back and change things now. Lesson noted for my next DB......
Count/Sum Help
May 28, 2006Hello,
Alright heres a problem for you's.
I have a table which holds roster information for staff. For each day in a 2 week period, there are 3 checkboxes, 'am' 'pm' and 'nt'. I need to perform a count on how many are 'am' 'pm' or 'nt'. For example, if 3 staff members worked on monday week 1 pm, i need it to return '3'. Problem is i am unsure how to perform a count on multiple fields?
Cheers
Derek
Max Of Count
Oct 25, 2006I'm struggling with this one.
first, I do a total query to retreive the frequency of a certain attribute
eg This produces
Customer Depot Order
CustA North 12 orders
CustA South 8 orders
CustA East 10 orders etc
CustB North 9
CustB West 11
CustB East 10
So now I want to retrieve for each customer, the Depot with the highest order count
ie
CustA North (12)
CustB West (11)
I can't find the right structure for the second query to generate the answer, because as soon as I do a group by, I get all Depots again! Or can I do the whole thing with one query.
If there are two similar max counts, ideally, I want to return either one. I suppose I could do a dlookup on the max count to retrieve the associated depot, but this seems sloppy.