I need to run a count of the number of records in a Query within my VBA code. Basically,
if the count of the number of records within a query is 0, then the code runs and if not, the code breaks and the user is left with an error message.
Problem is, I don't know how to reference the count of a query within VBA.
Hi,
I've been going round in circles a bit with this, read a lot of interesting stuff posted, but can't quite answer my problem.
I have a query that returns 2012 records showing the project phase for every Employee assignment. How do I group & count the records so that I get the number of projects in each phase for each employee?
My group and count attempts so far have either reduced the record set to 79 (the number of employees with assignments) or simply returned a "1" for each record.
Any pointers appreciated.
Regards,
I am trying to make a query that will count how many times a word shows up in a field.
I am still new to access and am having trouble with this one.
Any help will be greatly appreciated.
Thanks in advance
Jon
Hi,
I would like to count the number of records returned from a query, but am unsure how to do this using VBA.
Any help appreciated.
Thanks
I have a form where a user reviews information input by another user, once they have done this they sign it off by selecting their name from a drop down list. On this form there is a scrolling message which tells the user how many un-signed entries there are. This works fine until there are 0 (zero) entries to be signed off.
The scrolling message is linked to a count query which basically counts any records that does not have a name entered in the required field. I have done this with ' Not Like "*" '
Like I say it works when there is one or more entries to count, but as soon as there are none the query does not output a zero it is just blank. This is the problem.
I need some sort of statement to say if there are no matching records please display a zero.
Any help would be much appreciated!
I have a stock record database which I have 'inherited' from someone far cleverer than me!
I'm fairly used to basic SQL, but I'm teating by hair out over this particular problem.
I'm writing an Update Query to count the number of [NewModelCode] records WHERE Status ='Available' AND StockType = 'New' AND InstStockReference.OnlineShop = Yes and update a field called CountNew on a table called InstStockReference..
So far I have the following SQL:
UPDATE InstrumentStock INNER JOIN InstStockReference ON InstrumentStock.NewModelCode = InstStockReference.NewModelCode
SET InstStockReference.CountNew = DCount("NewModelCode","InstrumentStock","Status='Available'")
WHERE (((InstrumentStock.Status)="Available") AND ((InstrumentStock.StockType)="New") AND ((InstStockReference.OnlineShop)=Yes));
It partly works, but the result I get is a column count of 939 in every field where the Status ='Available' AND StockType = 'New' AND InstStockReference.OnlineShop = Yes.
I want to do a count the number of [NewModelCode] records.
Something's gone wrong? Any ideas?
If I have a table called "Calls" with an autonumber and another field with names for stores like this:
1 Hobby Mart
2 Peter's Store
3 Hobby lobby
4 Hobby Mart
5 Peter's Store
How can I build a query to count the number of different store names?
For example, in this case I need the query to return the number 3.
I'm trying to do a query to count corresponding records in another table. It works except for returning zeros. I've tried using NZ and switching the type of join, but to no avail.
Here's what I have:
Query A has 3 columns (FU kids)
AlphaID
DtcCtr (a Location Code)
DlsDtc (a Date of change)
Table A has many columns, but I'm only using a few. (dbo_MNCPSTNote)
AlphaID
DtcCtr (the same Location Code)
ServDate (the date I'm trying to count)
Here's what I have:
SELECT [FU kids].AlphaID, [FU kids].DtcCtr, Count(dbo_MNCPSTNote.ServDate) AS CountOfServDate
FROM dbo_MNCPSTNote RIGHT JOIN [FU kids] ON dbo_MNCPSTNote.AlphaID = [FU kids].AlphaID
WHERE (((dbo_MNCPSTNote.Center)=[FU kids]![DtcCtr])) OR (((dbo_MNCPSTNote.ServDate)>[FU kids]![DlsDtc]))
GROUP BY [FU kids].AlphaID, [FU kids].DtcCtr;
I want to know the count, including zero, of the number of records based on ServDate for each AlphaID in Query A.
I didn't create the tables and have no control over how they are designed/organized.
I have a table tblBookings.
In this table it has a bookingID, CustomerID and some other none relevant details.
The CustomerID comes from table tblCustomer. i.e a customerID must exist in the customer table to be allowed in the bookings table tblBookings
A customer can exist in tblCustomer without existing in the booking table.
I am trying to write a query that will list each and every customer ID in the tblCustomer and count the number of bookings that that customer has (even if it is zero).
I have a query that will count the bookings if they exist in the booking table and display the number of times that a customer appears in the bookings table.
SELECT tblBookings.CustomerID, Count(tblBookings.CustomerID) AS NoOfBookings
FROM tblBookings
GROUP BY tblBookings.CustomerID;
How do I create a query that will do this but list all customers even if they don't exist in the bookings table (but obviously occur in the customers table)
I am trying to create a similar query where all bookings per hotel are listed even if no bookings are made for that hotel. I am guessing the answer is the same as above.
The Ritz. Bookings 0
The Hilton. Bookings 3
The Carlton. Bookings 0
The Lowry. Bookings 2
For every hotel.
That kind of thing.
If you need more information please shout.
So I have a table with around 20,000 records and there is a field which holds a phone number for each individual within the organization, I want to run a select query that counts how many are not in the correct format
The format is 10 digits and it must start with a 0
Using Access 2010
I have created a query that returns x number of records. How can i count this number (x)?
View 1 Replies View RelatedI have a field on my Project form(form is based on a query) which is called Completed (Y/N). It holds values Y and N.
I’m wondering if there is a way to count how many Projects completed and how many didn’t. I’m not sure how to count just Ys and then just Ns.
Any help would be appreciated.
Thank you!
HI there
How to set up textbox which will count how many records is already in my table and add one more and display that in my Form????
cheers
Natal:)
I have "Age" field from 10-100 years old. My problem is I want to count how many are young(21 below), middle aged(22-45), and old(46 above) in a report. How am I going to write it in a textbox? Please help me and teach me step by step how.
View 8 Replies View RelatedI have a table with quite a number of records.
In this table I have a field [Qnumber], which gives me a sequential number.
The field size is Long Integer. So my records are numbered 1, 2, 3, ....n
What I want to achieve is to select only the even numbered records in this table, i.e. Qnumber = 2, 4, 6, ...... etc.
I can't find a way to do this.
Would appreciate any help on this.
Yes i'm having trouble with a Count problem, don't laugh at me.
I've got a query with 200000 plus records. Each record has an equipment ID number (its not the primary key) in column B. I just want to count up the number of records that have each equipment ID code, but im not sure how to do it.
Please help
I have an order database using Access 2000, I need a report to list all agents that have ordered in the past year, how many times they ordered and sort by Office city.
I have
SELECT tblCustomers.Type, tblAgentList.AgentID, tblAgentList.LastName, tblAgentList.FirstName, tblAgentList.Agency, tblAgentList.AgencyCity, tblAgentList.DeliveryAddress, tblAgentList.DeliveryCity, tblAgentList.DeliveryState, tblAgentList.DeliveryPostalCode, tblAgentList.[AgentOffice#], tblCustomers.InspectionDate
FROM tblAgentList INNER JOIN tblCustomers ON tblAgentList.AgentID = tblCustomers.AgentID
GROUP BY tblCustomers.Type, tblAgentList.AgentID, tblAgentList.LastName, tblAgentList.FirstName, tblAgentList.Agency, tblAgentList.AgencyCity, tblAgentList.DeliveryAddress, tblAgentList.DeliveryCity, tblAgentList.DeliveryState, tblAgentList.DeliveryPostalCode, tblAgentList.[AgentOffice#], tblCustomers.InspectionDate, tblCustomers.[Job#]
HAVING (((tblCustomers.Type)="P") AND ((tblCustomers.InspectionDate)>[Enter starting Date:]))
ORDER BY tblAgentList.AgentID, tblAgentList.AgencyCity, tblAgentList.AgentID;
It list all agents sorting by AgentID, with a line for each order.
I would like to list each agent once with the number of times ordered, and then sort by AgentCity. Any help would be appreciated... Thanks in advance!:D
Hi
Been taking abreak from Access for a few years now and cant get my head round my problem.
I have been asked to manipulate data from a Training Recods database.
Basically, training consists of 26 modules, there are currently 180 people who need training. Each person has been assigned a unique number, once a module has been completed, the date it was completed is entered into the database. There are currently lots of modules which havent been completed, what I need is a way of pulling that data from the DB.
I need to know how many people need to complete each module. For example, Module 1 might need to be completed by 15 people, Module 2 might need to be completed by 27 people etc.
I have enclosed the DB with the table and the form that I am looking to populate with the data.
Anyone have any ideas, I just can't get my head round it!!!!
Hello, I am new to Access and trying to run a query that will count only unique invoice numbers in my table. I am sure this is an easy command, and thank you for your help!
View 3 Replies View RelatedHi guys,
I know how to count records so that null records would be counted but I do not know how to do this:
I have customers and works. I want to create a query that will show ALL customers and number of works done for that customer (sometimes there is no work done for customer).
How can I do it?
Thanks,
Matt
I have a table which essentially is:
- Category
- Item #
- Sales $
I'm looking for a query that will tell me the count of items that make up 80% of the sales per category (probably would have to use a subquery here). So if my table was:
item #, sales $
1, $10
2, $8
3, $6
4, $5
5, $1
Total sales = $30
80% of total = $24
The number of items needed to get to 80% of total sales = 3
Is there any easy way to do this in a query?
In the Form Footer I use a box with '=Count(*)' to count all records.
But how do I count only those records that have the value '?'
in the field 'MailRead'.
Thanks for the help.
I have a form that has a subform in it, which is another table in it. I want to add the number of fields that are in the subform. What is the best way to do so?
I would like to write a VB script so that a field in the master field = the count of the records in that subform. Any help is greatly appreciated. Thanks.
I have data which has a one-to-many relationship and I would like to display in a form (or webpage) both the one and the many side of the relationship and to display a count of the number of records on the many side which correspond to each individual record on the one side.
I attach a zipped .mdb file containing dummy data which includes a pair of linked forms showing where I've got to so far with implementing the idea. If the Words form is opened first, the linked form, Associations can be opened by clicking on the Associations button.
(Incidentally, I need to do something to control where and at what size the two forms open on screen. I think I've seen from a post on this forum that what I need is DoCmd.MoveSize.)
The problem I'm hoping someone will help me solve is how to get the count of the records on the many side to appear only once and, preferably in the Words form, not the Associations form. If you view the forms in the attachment, you will see that at the moment the count appears once for each item on the many side in the Associations form.
I'm a beginner and am unsure if the solution is very simple, perhaps involving referencing a hidden control in the Associations form with a path to that control comprising various identifiers joined with ! and or . , or perhaps using a simple snippet of Visual Basic, or whether I'm asking for help with something which is actually difficult.
Good day,
I have a sub-routine created on the form labelled frmenrollcenter and inside this routine I want to count the records in tblec based on the value in "txtextl" textbox. Then I want to display this value in a message on the screen. I was wondering if anyone knows the function that can make this happen.
Thanks
is it possible to count the time between records? example
Table set up:
LogID
StartTime
StopTime
ProblemCode
Example records:
Id -------> StartTime ------> StopTime--------> ProblemCode
1 -------->06/10/05 10:00 -> 06/10/05 10:02 -> A101
2 -------->06/10/05 11:00 -> 06/10/05 11:02 -> A131
i want to count the time elapsed between, ID 1 ending and ID 2 starting, can ido this?
if so how..
the duration i am looking for in this case would be 58 mins
cheers
Andy