Hello,
In a form I have "txtBoxA". I would like store the number of records from table "A" based on a specific field into "txtBoxA".
Ex:
Table 'A' fields: QuoteID, Date, GenerateOrder
What would be the exact syntax for this??
The following code is not working
Me.txtBoxA.Value = DoCmd.RunSQL ("SELECT COUNT(GenerateOrder) FROM A")
Thanks
I have been pulling my hair out over a query application and I'm looking for some help...
For instance, I have a table with [PrimaryName], [SecondaryName] and [JobDate]. I want a query that will display if there is more than one occurrence of the same name in either name field on the same date.
If it were just one field I could do this using GROUP BY and HAVING but because I need to check both name fields I'm stumped. I tried a union query but that seems to group multiple occurrences together as one entry.
Any help is appreciated.
Student ID
Command over subject
Teaching Subject
Explaining things
Pedagogy Methods
Solicited_Participation_Class
1
Good
Average
Bad
Good
Bad
2
Bad
Average
Good
Bad
Good
3
[code]......
I have a table given above, table name is student. Which has following sample data.
I want to count the no. of students who say Good, Average ,Bad for every indicator Output from query:
Good
Average
Bad
Command over subject
2
3
1
Teaching Subject
1
5
0
[code]......
How this can be achived from query in MS Access 2010
I have table with following Columns:
Banker
Status
Week1
Week2
Week3
Week4
......
Week48
Week49
Week50
Budget
YearMonth
I need to extract the value only for few columns dynamically from result set. I have written following code for the same:
Code:
i = 0
strColumnsSQL = "Week" & CStr(gsReportingWeekNo)
Do While i < 4
i = i + 1
strColumnsSQL = strColumnsSQL & ",Week" & CStr(gsReportingWeekNo) - i
Loop
[code]....
I have a table that has two columns "Nationality" and "Gender". I wanted to run a query that will Group the nationality and then split the gender column into two columns and after that it will count both gender columns for each nationality. When I posted this question in "Reports" section I got the suggestion to use the SELECT COUNT in SQL. It worked but only for nationality. I couldn't get it work for the Gender column. I searched alot and the only thing I got was the SQL function to split data from one column into two but that also didn't serve the purpose (check the link to see why: [URL]) At last, I went on to create a cross tab query. Selected Nationality as Row header, Gender as Column header and Customer ID as calculation point. And there I got the result I needed. The SQL Code looks like this:
Code:
TRANSFORM Count(Register.[Customer ID]) AS [CountOfCustomer ID]
SELECT Register.National, Count(Register.[Customer ID]) AS [Total Of Customer ID]
FROM Register
GROUP BY Register.National
PIVOT Register.P_Gender;
Crosstab query did the trick..
I have one table in my access, and out of that I need to show a queri that will show only following result in 2 columns ID (same as original table)
SCHOOL_YEAR (all the students that are):
1 year and 1 year (repeat) as 1 year
2 year and 1 year (repeat) as 2 year
3 year and 1 year (repeat) as 3 year
Not to show dripouts, na and finished
Original table:
IDNAME
11 year
42 year
53 year
10dropout
11finished
12n/anot categorized
131 year (repeat)
142 year (repeat)
153 year (repeat)
My question is that can we do multiplication of data of two columns and result is automatically displayed in third columns in datasheet view.? Is it possible ?
View 1 Replies View RelatedI have a form that has several fields that a user will enter data. When finished, the data is inserted into a table. Works great. What I want to do now is look at one of the fields entered and if it is equal to a certain value, I want to disable one of the other text boxes (fields) on the form AND pop a screen that will allow the user to enter a list of names that will update a different table.
So, if user inputs a directory name GENERIC, the txtScriptName box needs to be disabled/greyed-out and I need a form to pop so the user can put in a list of script names. If any other directory name is entered, the txtScriptName box needs to remain editable. (For directories equal to GENERIC, there will be multiple script names instead of just one)
I've been successful at getting the form to pop if GENERIC is entered but can't figure out how to grey-out the txtScriptName field. I tried using Me.txtScriptName Locked in the Before Update of the preceding field but it didn't work - could still update the txtScriptName field.
Any other sugestions?
Thanks!
Mary
Hello,
I'm trying to make a report query work but with no succes so far. Can anyone please help me?
I've got a multiselect listbox and a txtbox (txtCursisten) where the results from the multiselect listbox appear.
I want to get the results out of a table (tblAbsentie) where I can set a start and end date AND use the people selected in the txtBox. So far I've got a NOT working query, a report based on the query and a button on my form.
The VB code behind the "show report" button is this:
Private Sub cmdAbsentiePerCursistPerPeriode_Click()
On Error GoTo Err_cmdAbsentiePerCursistPerPeriode_Click
Dim db As Database
Dim Q As QueryDef
Dim sql As String
If IsNull("Me.txtCursisten") Or Me.txtCursisten = "" Then
Exit Sub
Else
Set db = currentdb()
Set Q = db.QueryDefs("qryAbsentiePerCursistPerPeriode")
Q.sql = "SELECT tblCursist.Naam, tblAbsentie.Datum, tblAbsentie.Lesuur, tblAbsentie.AantalLesuren, tblAbsentie.Deelkwalificatie, tblAbsentie.Docent, tblAbsentie.Gemotiveerd, tblAbsentie.Reden, tblAbsentie.Status, qryCountLesuren.SumOfAantalLesuren" & _
"FROM (tblCursist INNER JOIN qryCountLesuren ON tblCursist.OVnr=qryCountLesuren.OVnr) INNER JOIN tblAbsentie ON tblCursist.OVnr=tblAbsentie.OVnr" & _
"WHERE (((tblAbsentie.Datum) Between [Voer begindatum in] And [Voer einddatum in]) AND ((tblAbsentie.OVnr) In ("Me!txtCursisten"))); "
Q.Close
DoCmd.OpenReport "rptAbsentiePerCursistPerPeriode", acPreview
End If
On Error GoTo 0
Exit Sub
Exit_cmdAbsentiePerCursistPerPeriode_Click:
Exit Sub
Err_cmdAbsentiePerCursistPerPeriode_Click:
MsgBox "Selecteer klas en cursist(en)."
Resume Exit_cmdAbsentiePerCursistPerPeriode_Click
End Sub
I get a syntax error when pressing the button. Please help...
SeBasTiaan
Hi there
Can someone give me a basic example.
I have a form that contains a textbox and a listbox. The listboxs rowsource is tblSPNZ.
The table has 2 fields 1 is and autonumber and the other is where I want the results to go.
How do I make a command button populate the table? Avoiding putting any results into the autonumber field?
Thank you for your help.
I have a form, on the form a textbox. Through the expression builder I have assigned one value to the control source of that textbox from a query. The query holds three values, all three of which I would like to use in a separate textbox. When I open the form the textbox just displays #Name. I'm guessing since nothing is happening because the query isn't run by command yet. I've used code like this:
Private Sub AppointmentID_Click()
Forms![ClientsMain]![TechViewSummarySubForm].Form.Requery
Forms![ClientsMain]![TechViewSummarySubForm].Form.Refresh
End Sub
to get a query to open, run etc. But that one is located in a subform which has the query as a control source. How does that work in the case I have now? Can I use the DoCmd function to run the query and get a value from it for the specific textbox? Or can't I use a (segment of a) query as the controlsource of a textbox at all?
I'm asking this since now I calculate and store certain totals by use of a textbox with =Sum() as control source in the footer of a form, which values I then assign to some fields in a table.
But I would also like to learn the right way, using queries, maybe for a later version of my DB when my skills have improved. I've been struggling with this now for a bit, but without succes. So that's why I wonder if I can assign a query or more specific one value of a couple of values in a query to a textbox in a form which has a totally different control source itself.
Hi all,
I have a select query that pulls in two date values from a textbox on a form.
SELECT DISTINCT Table01.SRV_NAME, Table01.IMP_CUTOFF_DT
FROM Table02 INNER JOIN Table01 ON Table02.Servicer = Table01.SRV_NAME
WHERE (((Table01.IMP_CUTOFF_DT)=[forms]![frmreport].[txtsqldate].[value]))
ORDER BY Table01.SRV_NAME;
However when I run it I get the following error message:"This expression is typed incorrectly, or it is too complex to be evaluated. For example, a numeric expression may...." but when I copy and paste the value of that txbox from the form into the query it works fine.
Can anyone see where the problem lies? I can't work it out.
Thanks in advance,
Mitch....
Here's a bit of a pickle I've been trying to wrap my noodle around.
Anyone have an idea what route to pursue (unbound form, or afterupdate, etc?) to force a validation rule on the number of characters in a text box based on the value of combobox in the same form.
Example:
If cboBox1 = 840, then len(txtBox2) = 6
But if cboBox1 = 820, then len(txtBox2) = 3
And so forth?
Thanks,
~Chad
friends, a small question.
I have placed a txtbox on my form and via a cmdbutton a can copy data to another text box. Is there a way I can replace data? Will appreciate any help.
I have a form that has a combobox and a field text. If i select any value in combobox i want to update the txtBox but not with the ID of the selection. I need to get the description of the combobox selection which is essentially the Column 2.
View 3 Replies View RelatedHaving had a pretty good look around, I think I must have missed something...
I just want to try and make a Forms single Address textbox = multiple table fields values:
Add1
Add2
Add3
PostCode
Cheers,
Pailin
It's an unusual request, I know, but it's necessary for my purpose.
I have a form, frmMain that I use to update a number of tables. On it is a number of combo boxs, comProduct, comBrand, comSize, comPrice and comQuantity. comProduct opens a new form, frmNew if the users input is not already in the table. On frmNew there are again combo boxes comProduct, comBrand and comSize. This form adds the record to the table.
So, if I input a new value - not already in the database - for product in the comProduct combo box, the form frmNew appears and I can proceed to define the product, brand and size of the new record. The form then closes and reopens frmMain and tabs across to comQuantity (skipping the fields I've already defined in frmNew).
Now if you can wrap your head around that, here is the problem: Because I've already entered the values for product, brand and size in frmNew, I want them to automatically appear in the appropriate combo boxs on the frmMain form. I've been using the following code (executed from frmNew, so Me = frmNew):
Code:[Forms]![frmMain].[comProduct] = Me.comProduct[Forms]![frmMain].[comSize] = Me.comSize[Forms]![frmMain].[comBrand] = Me.comBrand
It works, but I've since discovered it creates a new record in the table so I end up with two duplicate records (one when I submit frmNew and another when the values are automatically input into frmMain.)
Now, my question: How can I display these values in frmMain without having them create the second record? I was thinking of using a SELECT query somehow, but I don't know where to begin. I also considered using labels instead of comb boxes, but I'll need to be able to edit them if the record already exists.
I have a table tblDateGroups, with two field, [Group] (like This Week, Next Week, Last Month, etc) and [Code] that holds the code for criteria for each group in a query. I know the code is fine (like next week = Between Date()-Weekday(Date())+8 and Date()-Weekday(Date())+14 ) because I tested before putting in the table.
On my form I have a combo box that list all the [Group] and i hidden textbox that looks up the code based on the cbx after update...all that is good.
However, when i try to requery the report the criteria is not working. I am simply using the date criteria to read the hidden text box with the code string.
Forms!frmMainHome!subaWelcome.Form!txtCodeForQuery .
the error code is "This expression is typed incorrectly, or it is too complex to be evaluated. For example, a numeric expression may contain too many complicated elements. Try simplifying the expression by assigning parts of the expression to variables."
I am working with Access 2010, on vista. What I have is a query made up of two tables, one product the other inventory. (see below) query.jpg
In the product table i have a field called "minimum reorder level". In the inventory table i have two fields one called "number in stock" and "number on order". What i want to happen is "number on order" to be filtered by the result, if the "number in stock", is less than "minimum reorder level", if it is, have the result placed in the "number on order" field. EG. if the "number in stock" = 2 and the "minimum reorder level" = 5 then 3 would be placed in the field "number on order" and only the second record from the query would be visible (see below) Query result.jpg The result of this would mean that the field "number on order" would be populated with the result and the and query would also use this to filter the record.
I want to add a number to my results within a query depending on the month and how many results. For example I have 10 results in my query 3 from January, 5 from March and the rest from April. The 3 from January would be 1,2,3. The five in March would be 1,2,3,4,5 and so on. Is it possible to do?
I'm using access 2003.
Hi.
I have
Form with 3 list boxes.
1st LB populates 2nd etc.
The 3rd LB value chooses a field.
The Fieldname Table has field "Field Type"
I want to change the Text box next to the List box to this entry in the Db.
Ie. If I choose a field in the LB, say "Done?", then to update that field it needs to offer me a "yes/no" field type
Therefore it changes the TextBox to a Checkbox (or combo with Yes and No as options)
Any ideas?
hi Guys
I would like to write an expression (i presume) to auto fill a text box based on the selection made from a combobox...can anyone help or point me to a tutorial that deals with this??
Many Thanks,
RF
I there is no result in query, I need the default result zero in my form field. I only use query wizard to create queries.
View 5 Replies View RelatedI have a report due the first of each week in which I need the cases open and cases closed for the previous week, the week two weeks prior and the 2007 and 2006 year to date on two different types of cases. I have a case management table with a field for Type of Case, date assigned and date closed that I uses in my queries. Presently I have two query, one that generates only Type 1 cases from the Case Management Table and another for Type 2. I then use the Type 1 Query in another query that limits the results for Type 1 cases to those opened last week, one for those open two weeks ago, one for 2006 YTD and one for 2007 YTD. In these 4 queries I have one field [Type of Cases] and I have the query count. I then do this for Type 2 cases and then go through the whole process to do Closed Cases. All my queries have criteria to automatically filter the dates to the time periods mentioned above. I then have one report query that I put all the number in for my report. This query has 16 fields with the numbers for each period, last week open and closed, 2 weeks open and closed, etc. I then generated a report that takes these numbers from my report query and puts it in a report format automatically. As you can imagine this takes some time to go through each query to generate these numbers, so I was wondering how I may do this differently. Also, I have experienced a problem when a field produces no records I get a blank sceen with nothing under the Count of column and get the same thing for my report. How can I fix this.
View 1 Replies View RelatedI was able to use the UNION ALL qry. But, when I have another file (like original2) that does NOT have all the columns listed in the UNION ALL qry, I get a Parameter value box asking for the missing columns when I run the qry.
Example:
original1IDDateGroupChristianJohnnySteve 18/5/2013A1528/5/2013B338/5/2013C2348/5/2013D2358/5/2013E5
original 2IDDateGroupChristianJohnny18/6/2013A212528/6/2013B2338/6/2013C2248/6/2013D22
The UNION ALL qry includes all the possible resources ( includes all the possible column fields Christan, Johnny, and Steve).
When I run the UNION ALL qry with the original2 file, An "Enter Parameter Value" box is displayed with the mssing column name "Steve".
Is there a way to Map the original2 table into a working table with all the columns, or use VBA code to construct the UNION ALL qry to only include the existing columns? My data has variable columns and I'm trying to avoid the parameter popups.
I have a MS ACCESS 2010 database with a data table which i am trying to create a query from. I have 6 columns of data( one with an ID Field and 5 Name Fields). Below i have made examples of how it first appears as a simple query and the second will show you what i would like it to look like.
What the simple query looks like: [URL] ...
Second what I want the query to look like: [URL] ....