I need to display the out put of a table as chart in ms access 2007. My table is as below.
ItemID
Week 1 Value
Week 2 Value
1001
87
5
1002
80
1
1003
42
1
1004
55
164
In the chart X co ordinate should be the "ItemID" and the Y co ordinate should be the week number (eg, week1, week2 ...etc). Is it possible to display the chart with the above table? Or do I need to transform the table and then dosplay as chart? Also can I transform the above table as shown below using a single Transform query ?
I can not get a line graph inserted into a report by using the Wizard. I have 2 columns of paired data that I want to graph. I dragged the 2 columns to the "Data" control in the wizard and changed summarizing for both columns from "sum" to "none".
When I look at the report in Print Preview, the data points are stacked vertically in the center of the graph and the "Series" box displays what looks like the data. If I add a Date/Time column as the X-axis, I am told that I have to summarize the data, something I don't want to do.
I've made various selections using the wizard and all fail.
I am trying to create the Excel chart see attachments (ExcelChart.jpg) in MS Access but I don't think it's possible with the Access Wizard because it doesn't allow me to use more than one data field (step 2 in the Chart Wizard)
I created the Excel Chart using a pivot table in Excel with two data fields and they are graphed simultaneously
For the Access Chart I only managed to get the "Total Delay Series" and not the "Arrival Delay Series."
Must I use Excel to make this complex chart and link it to my Access form and if so can the chart still be dynamic? My intention is to set parameters using combo boxes and then create the chart on the fly. For example currently the user sees the series for the years 2004- 2008. I want to enable the user to be to have a choice about what years (range) they want to view.
I am trying to create a chart in Access but havent done it before.
1). I have the following data:
Code CountOfType Month
Q 3 3/1/2012
K 1 2/1/2012
CDSA 1 2/1/2012
[code]....
2). I dont to create a chart where I am showing the transaction count (countoftype) in the Y axis and the code and bill_date in the Y. I want the chart to show the transaction by code and show what month it occurred. Would this be a crosstab query?
I've developed an Access 2003 database (split) and so far so good. The main thing I'm not happy about is that I can't (or maybe don't know how) to implement a horizontal scroll bar with a line chart. I thought it would be a matter of selecting the option in a Graph but seems not. So I'm left with just selecting Top 50 records and plotting them.How could the MS Access team not know that people would want this or am I missing something? to get a scrollable line chart.
When you create a column chart and then change one of the series to a line, how can you then apply formatting to that line? I've attached a stripped down database showing what I'm trying to do. Series 1 shows individual monthly values (percentages) and series 2 shows the target which is 80% for each month.
The problem is that although I can apply formatting to the column series, I can't see any way of selecting the line series so I can set the formatting I want. I'm using Access 2003, on Win XP Professional, in case that's important.
Using a Microsoft Chart Object 6.0 in an Access 2010 report. It's easy enough to do the basics and that chart responds to data.In my case, I have 12 lines, or columns, being controlled by data. It responds to the data. just fine. What I want to do is control the line weight and colour of each line through VBA.
You can click on the chart itself on the report form, but formatting the line you actually want is almost impossible. Pretending we can, you get the pop-up configuration windows and the TAB "PATTERNS". Under that, you can select "LINE" and then choose the style, color and weight. This is what I need to do in VBA.
Lines like this do not work:Graph_Data.Columns("A").Line.Weight = 5 or... objDataSheet.Columns("A").Line.Weight = 5I tried a variety of versions of that and am pulling my hair out.
I have a module which reads a CSV transaction file line by line and adds the correct transactions to an access table and places the wrong ones in a logfile.Now some transactions are rejected twice there is even one rejected six times. Whereas one wrong transaction is processed only once. I am certainly overlooking something obvious in the logic but what. Here is the relevant code.
Code:
Function ImportCSVForConfederation(inputCSV, ORG) Dim TNO As Integer, TACT As Integer, TABLE As String, TLINE As String, I As Integer, J As Integer, K As Integer Dim FLD1 As String, FLD2 As String, FLD3 As String, FLD4 As String, LogFile As String, LogPath As String Dim Lim As String, ITNO As Integer
i need to create a system that can search data using keyword.so i want to create search button that i will create it at form. currently i have 1 table and in that table i have 10 fields which are project_name, doc_ref_no, doc_title, volume, book_no, author, doc_status, box_barcode, filling_location, doc_availability.
i have create 2 forms, one form for user to add new record and another one is to search record. the user can search by enter project name, doc title, volume and box barcode. for project name and volume, i use combo box and for doc title and box barcode i'm using text box.
i want to create search function that can detect from user keyword and even user did not fill in all the form, the system still can search the record.
:) Hello, Can anyone please tell me how to create a graphic (a chart like in excel) based on the result of a query? It's just names and values (2 fileds only) Thankyou.
i have about 1500 records in my database and i want to display a bar chart for each record, i can tryed creating one but when i try adding the months it says i only can add 6 fields but i want to include each month not just 6 months in the chart, this is an on going database so in the future there will be more months added. here is the picture of the form i want to be able to show 2005 and 2006 figues in the same chart
I am in Access 2003 and I need to create a chart of the inventory levels of a product. I have the daily production and I know that the amount distributed out of the warehouse will be the amount produced that day up to 200 items. However, I can't figure out how to keep a running balance of 'ending inventory' if the amount is over 200, so that it would be the next day's beginning inventory.
I am trying to figure this based on the formula:
beginning inventory + new production - distribution = ending inventory day 1 day 1 ending inventory (beginning inventory) + new production - distribution = ending inventory day 2
etc
I wrote a query to put the new production and the daily balance to retain in inventory (the lesser of daily production or 200). I need my query to be run so that I can put it into a chart, so I need a column to be 'ending inventory' by day so that I can have a line chart going across time.
When I use the Chart Wizard to create a chart it looks fine in the preview but when i change it to form design - to alter the fonts etc- it gives me a graph which looks as if it comes from the Northwest database. What on earth is going on???
PS Am i best using graphs in reports or Pivot charts
I try to develop an access 2010 Forms that contains 1 or 2 charts. So my problem is, in my form I have 1 combobox and 5 unbound textbox. Inside Event OnChange combobox, there is function DCount that will setup value to the 5 unbound textbox. Until this point, the 5 unbound textbox is have its value.
Now I would like to create a chart that value are based on the 5 unbound text. How can i accomplish this ? i see in many articles, a chart row source is link to a cross tab query.
I was just wondering if I could use a query and table to create pivot chart? and If so how I could do this? I need information from both in order to create the chart I want.
I have a a table 'Orders' with fields (Order Number, Order Date, CD Number, Card Number).
I would like to produce a query in access 2010 that would allow me to count how many times the CD Number 'Diab190617' has been purchased.
I would like to store the results of this count and counts on other cds numbers somewhere so that I can produce a graph/chart of these counts. How can I do this?
On trying to import an Excel 2007 file into Access 2007 I get the following:
1) Choose "External Data," Import, Exce 2) Select small file in MS Excel 2007 format. 3) Click on Import the source data into a new table ... 4) Choose OK
Immediately get "Microsoft Office Access has stopped working. Windows is checking for a solution to the problem..." This message never resolves, so I have to click 'Cancel'.
Then I get "Microsoft Office Access is trying to recover your information..." I have to click "Cancel" here as well and then kill MS Access in Task Manager.
Event Viewer gives following message, which is of no help: "ID: 2, Application Name: Microsoft Office Access, Application Version: 12.0.6211.1000, Microsoft Office Version: 12.0.6215.1000. This session lasted 710 seconds with 120 seconds of active time. This session ended with a crash."
Trying to import a small Excel 2003 file leads the same result. The same happens with a CSV file.
I have uninstalled and reinstalled Office 2007 as well. I am using Vista Ultimate.
I want to be able to take two separate queries to create a 2 line graph. Also to be able to spice the graphs up some. The ones I have done, single line, even seems dull.
I installed Office Enterprise 2007. Then I installed DEveloper Exrtensions, then Access Runtime 2007. All appear to have installed OK - they appear in Program and Features. Instructions on runtime packaging tell me that a Developer option should appear in the resulting drop-down when I click the Office button (top-left round thing) when I have a d/b open in Access. It's not there! I have un-installed and re-installed the extensions and the runtime - still nothing! Help! I do have Runtime 2002 (XP) on the same PC, is that relevant?
I cannot create a db from a template in 2007, either from a local one, installed with the program, or downloaded. The online ones download with no problems, but as soon as I click on "create", I get the message: [QUOTE] "Template 'xxxxxxxx.accdt' could not be instantiated." it goes further to say "The table 'xxxxxxx' could not be read from the template file. The object may be in an unrecognized format or contain invalid data." [UNQUOTE]. I have read through everything I can find on here, and searched the internet repeatedly. Some places say that certain .dll files are not registered, but after downloading these files, I am unable to get them to register. I have uninstalled and re-installed the entire Office suite, and run the Repair tool 3 times, but to no avail. The files are stored in, and downloaded to, a Trusted location. Templates from 2003 will work, but not 2007. I'm at my wits end now.
I'm trying to create a chart in a form, this is not a problem, however, the chart types available are a bit limited compared to if i inserted a Microsoft Excel Chart object.
I'd do that except I'm trying to create a chart based on a query.
Is there a way to make the chart wizard use the Microsoft Excel Chart object as its chart creator so I have access to the chart types available in that object?