I have written a piece of code in Access that creates a Excel work book. The work book is populated with the various data and then made visible to the user.
Everything is working perfectly apart from one minor problem.
When creating a new workbook excel automatically puts 3 worksheets in... If the code creates 1 or 2 sheets of data I want it too delete the sheet that is blank. This is easy to do although it always prompts the user for confirmation.
How do I delete a worksheet without the prompt?
I have hunted everywhere for the answer and can't find it anywhere, any help would be great.
Example of code:
Dim XL As Excel.Application
Dim WkBook As Excel.Workbook
Dim WkSheet As Excel.Worksheet
i have an excel data for assets and i have imported it into access 2010 but i want to be able to do the ffg;
1. want to be able to generate reports like how many computers does a particular branch have. 2. i want to be able to sum the no of each field heading per branch
hey group How can i have something like this loop to run from ccess application which is already currently opn and where work is done ?
With objActiveWkb.Worksheets("Reconciliation Sheet") For ii = 5 To 200 If Range(ii, 9) = "NO" Then Range(ii + 1, 9).Interior.ColorIndex = "yellow" End If Next End With
I have access query opening in excel. After it opens i would like everywher where where is says "no", to make next 2 cells BLUE.
The code below is doing it, but it's taking few minutes. is there any way to speed it up ?
'shading non-matching items With objActiveWkb.Worksheets("Reconciliation Sheet").Range("b5:ak500") Set c = .Find("No", , , xlWhole, , , True) If Not c Is Nothing Then sAddress = c.Address Do c.Offset(, -2).Resize(, 3).Interior.Pattern = xlSolid c.Offset(, -2).Resize(, 3).Interior.ColorIndex = 33 Set c = .FindNext(c) Loop While Not c Is Nothing And c.Address <> sAddress End If End With
What I am trying to do is populate the specific fields on excel sheet based on access query. so say I have 3 separate fields Name, Job, Salary on excel sheet (already designed excel sheet). and my access query has all 3 fields pulled up for all employees. Now if a person selects his "Name" on access form person should be able to see prepopulated excel sheet with his name, job and salary. I know I have to go recordset path.
I have been importing excel spreadsheets succesfully for a long time now and this new problem I have never seen before. I don't know how to deal with it. I have had a look on here but could find nothing similar, I have not really had a any luck searching google, mainly because I am at wits end to find a suitable search term.
Here's what's happening: When i upload the sheet as is, it works fine, bar a "data conversion error" for one column which contains mainly numbers but a few cells of letters.
as before, I have inserted a line at the top of the spreadsheet (below the column headings), and put a 1 in for each numeric column and a letter for each alphanumeric and text based column.
Now when i import to access, I get no conversion error, but access has inlcuded about 20'000 blank lines between the headings and the actual data.
I am trying to export certain values which are in combo box of MS Access to excel sheet. But what's happening is its populating ID of the field instead of Field Name.
I'm importing data from Excel to Access using Access VBA which works fine that sheet name is first sheet in workbook. However, if multiple sheets exists in the workbook and that particular sheet can be 2 sheet, 3 sheet or any sheet. In that case how to search particular sheet name and import in access. Below is the code I have used for importing the data.
I would like to embed a blank worksheet in access form. I want to do a macro to change the cells value when I click on a button, but I don't know how to do it?
I am pushing some data to Excel from an Access query. When the data is in Excel I reformat the sheet by changing the fonts, applying borders and cell formats - I have got all of this to work fine.
The one thing I am struggling with is applying conditional formats. I am pretty sure it is something to do with incorrectly referencing the applcation/sheet. An extract of what i think to be the key parts of the code are below.
.... Dim ApXL As Object Dim xlWBk As Object Dim xlWSh As Object ...
Set ApXL = CreateObject("Excel.Application") Set xlWBk = ApXL.Workbooks.Add ApXL.Visible = True
I am writing the following code that will first of all display column headers dynamically using "Headers" field data from Access table and then find out the sum(volume) using column header and first column values. The following code works fine to display headers dynamically in Excelsheet from Access table but doesn't display sum(volume) in all the corresponding cells. As I can't attach the Access table so I have stored data from Access table to sheet named "Access Data" as attached. The sheet2 named "Report" should populate total volume .
Code: Public Function Inputdata() Dim cn As ADODB.Connection Dim rs As ADODB.Recordset Dim r As Long Dim i As Integer
I have an access table and I want the code that will check two columns in the table "EnvelopeType" and "EnvelopeSize" and create headers in Excelsheet automatically. In the attached workbook, like in sheet1 the headers are already appeared, I want this to be done dynamically using vba code so that if new values get inserted in EnvelopeType and EnvelopeSize then we won't have to change the code to display more headers.
Please see attached workbook named Sample and Access table. E.g.
EnvelopeType EnvelopeSize TNT 2nd Class C5 PP1 2nd Class C5 PPI 1st Class A4 Recorded A4 TNT 2nd Class C5 PP1 2nd Class C5 Recorded A4 PPI 1st Class A4 Recorded C5
With the code it should display following headers in excel sheet:
TNT 2nd Class C5 PP1 2nd Class C5 PPI 1st Class A4 Recorded A4 Recorded C5
In sheet 1, In column A all the Batch numbers are present. So I want to check if each of these is present in Access table named "tblmain". If its present then display its corresponding Policy number in Column B of attached workbook.
I have a form where when the user clicks on the browse button then excel workbook filepath gets stored in the textbox as below:
Code: Private Sub CommandButton1_Click() ChooseFile End Sub Sub ChooseFile() Dim fd As FileDialog Set fd = Application.FileDialog(msoFileDialogFilePicker)
[Code] .....
Please see attached the excel workbook. Everytime the user will select Excel workbook using Browse button. Now in that file , the first sheetname will always be "Summary". I want to perform the following steps:
1. So now I want VBA code to copy the data from columns "Withdrawn","Obsolete","Updated","LitRef" from Summary sheet to the Access table named tblSummary.
2. When the data gets copied in Access table then write So VBA code that will check if the data in field LitRef in table "tblSummary" is present in field "Reference" of Access table "tblliterature" . if its present then check in the tblSummary , which corresponding fields out of "Withdrawn","Obsolete" and "Updated" stores "Y" . 3. If "Withdrawn" field value is "Y" then change the status of corresponding record of tblliteraure to "Withdrawn" 4. If "Obsolete" field value is "Y" then change the status of corresponding record of tblliteraure to "Obsolete" 5. If "Updated" field value is "Y" then change the status of corresponding record of tblliteraure to "Updated" .
See attached the Workbook. I need to check the policy Numbers in Column A of all the sheets in the attached workbook if its present in Access Table. If yes then write the corresponding ScanDate and BatchNo from Access table to columns I and J of all the sheets. I need to write VBA code to perform it.
In the attached workook, only Sheet1 contains the data but in actual there will be data in 5 sheets in the workbook.
I am having real problems creating a Excel from Access. I have rea lots of threads, but none seem to address this problem.
OK, so I have windows XP, Access 2003 and Excel all running quite happily on my PC, when I copy Access databases with the verb ".Excel" in it, I can access it and update/extend as needed.
However, I have just created a new piece of VBA code in a new database and the ".Excel" extensions are not present.....
So I have
Sub openReport() Dim myXL As Excel.Worksheet Set myXL = createXlWorksheet ......... End Sub
Public Function createXlWorksheet() As Excel.Worksheet Dim xlApp As Excel.Application Dim xlBook As Excel.Workbook Dim xlSheet As Excel.Worksheet
Set xlApp = CreateObject("Excel.Application") Set xlBook = xlApp.Workbooks.Add Set xlSheet = xlBook.Worksheets.Add
Set createXlWorksheet = xlSheet Set xlSheet = Nothing Set xlBook = Nothing Set xlApp = Nothing
End Function
And in some databases this works correcttly, but this one database,when I type the string "Dim myXL As.Ex" I do not get the "Excel" operator presented, it is just not in the list of object functions..... any ideas?? it's sending me mad!!!!
I am new to Access and somewhat OK with Excel.I am working at a government institution, agriculture sector. We have field staff of ~150 doing different field ranges ~350. Some officers are assign to more than one field BUT no field is assign to more than one officer. (these fields belongs to different Districts, number of fields in each district is not the same)
we have four different programs namely new cultivation program (NPP), productivity improvement of existing lands (PIP), farmer capacity building (HRM) and post harvest handling (PHP). Each program has its activities lets say NPP1, NPP2, PIP1, PIP2,PIP3 etc. for an example NPP1 is land inspection, NPP2 is donating planting materials. these activities are predefined and sequential. (planting materials can not be donate without land inspection)
Officers send their progress to progress monitoring unit monthly which includes progress of each program and each activity progress for that month. My objective is to track, analyse, visualize officers progress.
These are the questions I have,As I am OK with Excel and NOT good with Access do you think I should use access for this due to any special advantage only access can give me.can I visualize data with Access?
I have attached the excel document in a zip file. Excel documents are not an authorized file type. This is going to be used for volunteers to input the shift and day they would like to work. I want to start by requiring volunteers to contact me and I will add them to the list of possible volunteers and I will give them a unique identification number.
When they contact me I will require all the information that is currently in the excel document (first, last, supervisor, ph number) I will then add them to a list of possible volunteers.
Then I would like a form they can access via sharepoint for volunteering what shift they can work. On this form it will have a box to input their unique id number and then select a shift from a dropbox (that has not been filled and auto populates). This will add them to the schedule.
Then I need a way to pull a report that shows all the volunteers and does not include their ID numbers.
As you can see the supplied document is full for March. I also have a second sheet that is blank for April.
I imagine there will be tables for
Volunteers (no duplicates in this list) Supervisors (1 supervisor can be over multiple Volunteers) Dates/Shifts (there are 2 shifts per day, there are 2 slots per shift)
I was wondering if it was possible to create a average list box in a form sheet? For example, I want to create another listbox underneath the 3rd box to average out what I have circled. Is this possible to do in access?
I've written this code in Access to create a pivot chart in Excel. All the code listed is good except for the last line. The last line creates another instance of Excel. I can't figure out what the correct syntax is.
Set xlApp = New Excel.Application xlApp.Visible = True Set wb1 = xlApp.Workbooks.Open("c:chi estpivot.xlsx" wb1.Sheets.Add wb1.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _
I have 2 table currently linked together using a one to many relation. Rather than manually updating the information each day in table 2, i want the same format of data but using a linked excel sheet. This way the information can just be updated elsewhere by the excel sheet. I can't seem to get the sheet to link in the one to many way though, just intermediate. Is this possible?
I have an Excel sheet that I'd like to bring into an Access Form -- populate the Excel cells with data from textboxes on the Access Form and print it. I tried copy/pasting various things in, but it's pasting even text from a cell as an Excel object (let alone joined cells and images). Where can I find more information about this?
I found http://support.microsoft.com/?kbid=210288 But, when I put that code into the form for saving text from a text box to an Excel cell, it tells me that the word "Set" is a "Compile error: Invalid outside procedure."
Also, how do I refer to a joined cell? I've found that I can copy from a joined cell, paste into a host cell and select "Paste Link". This puts an absolute reference to the joined cell in the host cell (=$A$7, for instance) and when I change the joined cell the host cell is changed. Pasting =$A$7 seems to merely put the face value of "=$A$7 into the host cell.
find a way to automatically copy data from an access query to a sheet in excel at the end of every month we record financial data from our database into an excel sheet for our accountants. im still designing the query to format the data exactly the way we need it, which is why im not too clear on all the details (have a meeting with the accountants on wednesday to confirm everything, but im hoping to get most of the function written by then at least)
Ive already got the pathfilename and worksheet name stored in variables (excelFile and workSheet respectively) and ive worked out a way to store the row number (in a variable called simply rowNum), i just need to add one record to that specific row, from columns B to I) and for now lets just assume the query would be qryFinancialData. simple way to export the data, ill be formatting the query so that the first field in the query will go into column B, second field will be C, third field will be D, etc.is there a quick way to open the file, add the data to the right columns/row and close/save the excel file, all through VBA?