Does anyone know how to go about this or know previous thread stating how to go about this?
I have a Follow-Up labeled Text Box (Short Date) and I want for the associate to be able to set a desired follow-up date and for the account to disappear from the list afterwards till the follow-up date expires and it becomes viewable again.
Any suggestions?
I am a completely green when it comes to Access and MVB. I've surprised myself in creating the db and form.
My db is for troubleshooting outlet issues. I have a list of outlets and their various configurations. Users NEVER add or change any info. They select the outlet from a combo box and view the information. The problem is that you can move the wheel and change the outlet information being displayed but the combo box does not reflect the change; it continues to show the initially selected outlet name.
How do you get the combo box text to follow the mouse wheel?
I thought an easier solution would be to disable the mouse wheel, but in looking through this forum, apparently not.
I am using Access2000 on an XP machine. . .
Ok, firstly im sorry if this is in the wrong forum. I say this because my problem first begins with the tables but then i need to sort a problem out with the form aswell, but i will put it in here.
Here is the problem. Im sorry if im not too clear with this.
I need to create a register system E.G. A child comes into a club, he is registered. At the end of the session the child leaves the club. His depature is registered and his departure time is also recorded down.
Like a paper based school register but electronically.
How would I go about implementing this into a system?
Would I need a child table (with fields such as Child ID, Forename, Surname etc.) and a register table (not sure on the fields)?
k, this bit below probably goes in the forms section...
How would I get this to work on a form so there were boxes to check for arrival and departure, and when a button is clicked the depature time is filled in for each day of the term?
I need a query run that brings up a list of customers that need maintence after 6 months after their last maintence service. As soon as you open the DB, the event/query runs and if there are any customers past due to display them. And if there are none, to not even show the query at all.
I have very little experience with timers and if/then statements and don't know how to set this up.
Any help would be greatly appreciated. Thanks in advance.
I'm trying to create an invoice system with a sub-form within the main form. The issue I'm having is that the data in the sub-form keeps getting overwritten each time a new record is created for the main form. So when I go back to edit an older record, the data in the sub-form is changed to whatever the latest record had in it. Is there a way to lock in the data in the sub-form so that it stays with it's own record?
View 1 Replies View RelatedI have a need to convert the export of an Access report to an ASCII file.
The export needs to have a specific format - described below:
Field Position | Field Length | Field Name | Field format
1-6 | 6 | Member # | text - right justified
7-12 | 6 | Trans Date | YYMMDD
13-15 | 3 | Pay code | Alpha/ NUM - Left
16-26 | 11 | Amount | -9999999.99 (*)
64-71 | 8 | Check # | Right
general comments and questions:
This report needs to interface with some sort of transaction accounting system - No Idea what it is, but this format of the report will interface.
The field positions go from 1 to 73. I need only supply the data above, so the check # is way out of sequence. Do I need to have the space inbetween "Amount" and Check Number in the report? Will a simple text file work with all the fieds together? or will I need the space in there? Is there a way to design a report in an ASCII format in access?
Specific Questions
I think I need to change the format of the amount and date fields. I am currently using the short date format 8/30/04, but need to return the date as YYMMDD - 040830. How can I change this format to reflect the ASCII format. The form is also set with the default "=Date()" so the user doesn't have to enter the date everytime - it can also be edited for older data. I would like the date to appear the way it is on the form 08/30/04 but get entered to the table as 040830. Is there a way to do that?
The amount field is odd - I'll include the exact criteria that is desired:
"All Amount Fields must be right justified and space filled. If the amount is a credit, show the "-" sign at the beginning of the number. Payment should be entered as positive amounts. If zero, assign the fied as 0.00 (space filled)"
Is this just a mask that needs to be added? Currently, The field shows $7.00 when 7 is entered to add cent, you must type in 7.50, tab will put in the "$". I need to get rid of the $ and space fill the field?
Any help would be great
I have our primary web based inventory system that I am exporting to Excel and using this as an import to Access for the main raw data for my database. This being inventory it changes daily so I am updating this table every day. When I try to append the table it ads all the records. I am wanting an easy way to add only the new records/take out the ones that are no longer there. Basically update the table with what is currently there.The only have I have found to do this is by running non-matching queries and update queries.
View 2 Replies View RelatedI have a table in access database which contains a text field 'EDate' that stores Date value in format (12-Apr-2013). Now I want to run a sql query on that field. User will give an input date. The sql query needs to fetch me all the records from access database whose Edate is less than or equal to the user input date.
I am using DateValue function to convert my text filed Edate into date. My query is something like this:
select * from table_name where DateValue(EDate)<='user_input_date'
I am able to perform above task if the system language settings are 'English'. But if system language settings are different say Turkish, then the query fails.
I searched a lot on web and found that DateTime function compares test data with the system date time format and gives the result. Thus it fails with different language settings.
I have a continuous form (2003) with 6 text boxes (StartTime, StopTime, Comments etc...). I would like all the text boxes to have a gray background if the StartTime for that row is less than Today().
View 5 Replies View RelatedHi all,
I have a text source file and inpul layout i.e. field names start and end positions in excel file. I want create a table in access from the text data using excel file layout.
Can you please help me out in this. I am a mainframe programer and recieved an request to work in access.
What steps do you(s) follow or recommend to creating tables? Any standard questions? I was reading Erwin, data modeling book and didn't see a stardard check list of things to ask.
I think I need to set the following up in a db, (currently in an excel spreadsheet - has a lot of Redundancy in it) type of inspection checksheet, by machine (20 machines) and shifts (3) There are 20 or so questions that need to be filled in, (yes/no and numbers). any thoughts?
The fields on my form are not in the same order as in the table. When putting new data in the form and moving from field to field by TAB key, the cursor would jump from the field to field in the order of fields in the table. How do I change it so the cursor moves from field to field in the forms format.
Thanks in advance,
John
Greetings,
I am just posting a follow-up on my previous post on designing functional forms. Telling by the lack of replies, my original question may have been long winded and tedious. Let me try to narrow my question and make it more concise.
In two tables connected by a one-one field name ProfileID, how can I set a new field in the second table (call it StepNo or procedureNo) so that it increments step numbers for each unique ProfileID record? Thus for each new Profile record created in the first table, a new form will allow the entry of X numbers of steps into the second table and automatically link the two records?
I hope that clarifies my problem. Thanks in advance.
thanx for the advice...that does make more sense. my only other issue is adding the letter (m for meter permit, h for hydrant, etc.) to the permit # if they are all going to be in one table. btw, sorry for the duplicate postings...just under a bit of stress @ work. i'll make a note of it.
View 2 Replies View RelatedHow do I enter a formula/calculation in a table for follow up dates. I have a basic start date. In my form/table, I want the program to insert the following follow up dates automatically: one month, 3 month and 6 month.
View 2 Replies View RelatedHi,
I'm wondering why my query is not working properly. All I'm just trying to do is to display all the years greater than or equal to 2000. But still, it displays the entire content of the colum from 1991 to present. How did this happen?...
is there something wrong with the way i set my criteria?
Criteria: >="2000"
I am trying to use followhyperlink as a way to open a link in a browser to a file in a shared dropbox folder. I have a form with a control, the control is named LinkToDoc it's record source is a text field in a table. The file path in the table is similar to [URL] ..... I am getting run time error 15, cannot open the specified file.
Code:
Private Sub cmdOpenFile_Click()
Application.FollowHyperlink LinktoDoc
End Sub
I follow a ritual of moving last to first before looping through a recordset. I started following this because in the way back (I think on office 2003). I used to get an error if don't do it. Is the problem still exists? Is this ritual scientific still?
Code:
Sub mac()
Dim myRset As Recordset2
Dim AttachmentField As Field2
Set myRset = CurrentDb.OpenRecordset("Table1")
With myRset
.MoveLast
[Code] ....
I have two fields ([Big Problem] and [Little Problem] that I need to output (on a report) as one field and have them appear as two paragraphs. I use a query to append them (BothProblems:[Big Problem] & " " & [Little Problem]) But I can not figure out how to put a line feed (chr(10) and chr(13) between the two lines to make a charage return.
Any ideas
Mike
I am trying to create some code for a button in a report that will follow a hyperlink to a specific file. The problem I'm having is that the files that are at the end of the hyperlink can have various extensions (*.doc, *.docx, *.pdf, etc.) I'd like to be able to put a wildcard in the code to allow the opening of the file regardless of the extension.
Code so far:
Private Sub Command6_Click()
Application.FollowHyperlink ("C:UsersjbeggDocumentsAccessTestFolder" & [FileName] & ".*")
End Sub
My database exports data to one of our customers who then inputs the data into their system.
One field i have is "RO Number" which i have as an autonumber which works for the purposes of my part of the system.
However they have it set as "RO9999", (Their system has been set up for years, we are a new "branch") but they aren't in access.
They want the RO number to be a running serial from RO30000, RO30001 etc
The data in entered on a form.
Dear All:
I have created a form with students information, name, address, ID number, etc.
Is there a way to place a checkbox on this form that when it is checked, it displays text on a SPECIFIC AREA ON A REPORT?
I wish it to return this text on a report: "HONORS COLLEGE"
Many thanks in advance,
Dion
I have little bit problem in access here, if i want to create two textbox... first textbox for time and second textbox for unit. When I type (time) in first textbox, second textbox will appear automatically the unit number...
Example
1textbox-----------2textbox
1<time<=60 ------- 1 unit
60<time<=120 ------ 2 unit
120 < time <= 180 ------- 3 unit
First I'm developing in Access 2010. I am struggling with code that is supposed to create a text file and populate it from a query. The Query "cbt_Candidate_Export_Temp" is working fine but I keep getting the error in the second argument:
"Run-time error '3625': The text file specification 'cbtTab' does not exist... "
DoCmd.TransferText acExportDelim, "cbtTab", "cbt_Candidate_Export_Temp", "denali
bccdatabasesBCCCBT_Export" & strFileName & ".txt", True
What object is "cbtTab"? I didn't write this base code and I can't find it nor do I know how to create "cbtTab" ....
Each each record in table1 has a unique four character (alpha-numeric) code to identify it. The first two numbers of this code represent the group it is in. (Ie. 15AB and 1502 are both grouped together) The second table stores values that apply to the entire group. I need to create a relationship between these two tables based on the first two characters in the ID field.
Things I've tried:
* Making a calculated field with left$() formula - Access doesn't allow relationships on calculated fields
* Create a new field for just the first two characters and create a data macro for after update and after insert to update that field with the expression - cannot edit the field the user is on
I am looking to create a catalog database. It is to serve as a finished product warehouse, as well as a product development tool. There are a number of fields, most of which are straight-forward.
One large problem I have is that the product descriptions are roughly 700 characters. Is there a way to have this information entered into Access and stored either in this database or elsewhere?
Any help would be GREATLY appreciated.