I am trying to finish off my database with this last query. I have two fields named date_to and date_from, within a table tbl_non_avail . I need to show people who are available not between the from and to dates.
I am trying to create an expression in a query to sum only the # of hours a student attended between two date fields. I do not want to use a parameter because each student has different start and midpoint dates and I need to see all of them in one list.These are the fields I'm using in the query:
Student Name Start Date Midpoint Date Hours
It keeps giving me "0" or if I move the () around it says the correct syntax is [NOT]
Expr1: Sum([Hours]) between [Start Date] & [Midpoint]))
I am writing a small program for my sons school for there athletics day. We want to register all the students on a data basis. I have a form where you capture all the child's information and then tick box for each event that there will be for the day. So we will only tick the events that the specific child will participate in. I design the table to just import the information from each school from a excel spread sheet directly into the table. What my goal is to print report for each event that will only show the child's names that has register for that specific event and all the different age groups separate. I am stuck at the query and can't seem to get my mind around how to define the query.
way to merge various fields from a table into just one using a query.The purpose will be for easier copying and pasting in to an email.So we have a table to stores information such as Site Contact, Address 1, Address 2, Address 3, Postcode etc.
I want to be able to run a query that will put the address in to just one box, either in the query or on a report then it's much easier to just highlight the full address and copy and paste it into an email. Rather than copying each field individually.
Here's my problem. We maintain a list of items that are sold on ebay. We keep track of all items purchased by individuals and the dates that those items were purchased. We guarantee shipping by 6 weeks after the sell date...
Therefore, I am trying to create a query that will show me all items that are 6 weeks and older and have not shipped. There is a column that says date purchased and one for date shipped if an item is already completed. Any suggestions!!??!?! :confused:
I created a form in Access that retrieves data from a table. Inside the form, I am able to access/populate data fields with data from the table. I also have data fields, inside the form, that requires key-in data. I have some how lost the ability send all data field information to a second table and clear existing data fields for new entry.
Questions: What settings, code or buttons can I use to send/store data field information to a new table? What settings, code or buttons can I use to automatically clear all data fields from my form once data has been sent to the new table?
Ok I have a tbl with the following fields: Name Date Activity Hours
I have a form with these fields on it and two additional fields: Total Hours Hours this Month
Those fields need to do just what they say, calculate the total hours and calculate total hours for the current month only.
Here is the code that I have thus far, that is not working: SELECT tblVolunteers.Date, tblVolunteers.Name, Sum(tblVolunteers.Hours) AS tot FROM tblVolunteers GROUP BY tblVolunteers.Date, tblVolunteers.Name HAVING (((tblVolunteers.Date)=Month(Now()))) ORDER BY tblVolunteers.Name;
If I take out the "=Month(Now)) portion I can get the total hours, so that part is done, I just figured that out..... I get nothing back on the above sql statement.
Hi! My question is similar to Hondasteed earlier today but a little different. I have a database that has 6 date fields. I would like to develop a query where the user enters a start and end date and the query checks all six of those fields for the appropriate dates and shows only those records who have dates in that range. The dates would change each month as we ran the query again. I would appreciate any help as this has really had me stuck and I'm guessing it's a simple solution. Thanks!
I have a parent table [Case] and a child table [Action], in a one-to-many [Access 2003].
The parent has an open date and a closed date.
The child has a received date and a completed date. The child may contain more than 1 record that matches the parent.
Date fields for activities that have not yet happened are blank.
A typical example might be one parent and two child entries for a total of six dates fields.
I am after only a [single] most-recent action date of the six [there could be a tie for that most recent date, and then there would be two records returned in the result].
I am working for a table that includes a list of every parent record with the name and date of the most recent, or latest activity date.
I have a table in which each record includes a field showing the time that an event started and then another field which stores "how long did it take", these two fields are both defined as a short Time. I then have a query that runs through the "how long did it take" fields to produce an average time for the whole sequence of events. Two problems:
1. The average comes out as a decimal like 39553.367942 instead of several hours and minutes.
2. When I try to access this value using DLookup on a form I get "#error"
The database I am working with contains several different tables and a variety of information. I need to create a query that accesses information from two different tables. Though the tables contain other fields, the fields I am most interested in are:
Table 1: Protocol Information "Protocol ID", "Title", "Expiration Date"
Table 2: Regulatory Submission "Protocol ID", "Description of Submission", "Submitted By", "Date of Submission".
The way the data is stored, each protocol has a Protocol ID, and there is only one record per protocol in the "Protocol Information" table.
However, each time these protocols are submitted to our review board, a log is created in the "Regulatory Submissions" table.
I need to generate a query that pulls only the most recent submission date, so that the query output would look like this:
"Protocol ID", "Title", "Description of Submission", "Submitted By", "Date of Submission" (Where this is the most recent one), "Expiration Date"
From other forums and posts, I tried to create an SQL aggregate function, using Max or Last to get the most recent date. I was successful, but only if the query contained just the "Protocol ID", "Date Submitted", and "Description of Submission" fields. Adding any more, or creating a query to use the outputted data didn't work (it could be that my second query was not written correctly.) I am very novice at creating complex queries, and at SQL.
One additional complication: There are two values in the "Description of Submission" field of the "Regulatory Submissions" table that I am not interested in. They are "Adverse event" and "AE Summary Log". I can successfully filter them out using a criteria expression, but integrating all of these pieces has not been easy (or possible, yet).
I'm out of ideas. This is really complicated, and I apologize. Any assistance would be greatly appreciated.
I made a basic Seniority List for my work place using a simple query that pulls info from a main Employee Table. Easy enough using just a simple query with a sort. Problem is, about a dozen or so of the Employee have left and since been rehired. Their Seniority is based on their Rehire Date and not their Original Hire Date. In the main Employee Table I am pulling this info from, there are two Date Fields...
[Hire Date]
[Rehire Date]
Is there a way to build a query where it can check both fields, use the more recent date, then copy the "winner" in a 3rd field?
I am trying to create a select query on "ApprovedDate" where no approval is recorded. IsNull returns an expected type mismatch. Any ideas? Regards:confused:
I need to know a query to pull information from two date fields into one. I have a BuriedStartDate field and an AerialStartDate field. In a third field I have PlacementStart. I would like to put the date into the PlacementStart field which ever is the oldest date bewtween the BuriedStartDate and AerialStartDate. It has been awhile since I have done any queries on Access 2007. I am completely self taught in Access.
I have a table, tblDailyCalls, that contains agent_name, date, calls_ answered, and talk_time. Ideally on a form, the user will select an agent, enter the date range in txtStartDate and txtEndDate and a report opens to show what the total amount of calls and talk time is for that date range.
All I've managed so far is doing a simple expression on the report itself to sum the fields I want. But my method returns every date in the range. I would like to only display the total.
I've been trying with Totals in the query and crosstab queries but am not familiar with them.
I'm trying to get my "IncidentDate" field to autopopulate two other date fields to a few days from the "IncidentDate". The other two date fields are "ContainDueDate" and "RootDueDate". I'm trying to accomplish this on my "Test CAP Form"
I tried using the following in the BeforeUpdate of "ContainDueDate" and received a complier error: expected =
Code : DateAdd(d,2,[IncidentDate])
so I removed the parenthesis and nothing happened
Code : DateAdd d,2,[IncidentDate]
I even tried redoing it in the AfterUpdate of "IncidentDate" and nothing happened either
Code : DateAdd d,2,[ContainDueDate]
I'm not sure if I'm even using the right function to get what I want.
I have developed a database which has required many checkbox fields to enable analysis. It requires to have the facility to input random/variable date ranges for statistical purposes.
I have built a query which obtains the counts of multiple fields using the following parameters in Query Builder in Access 2010. Although this comes up with the correct results for these multiple fields when I try introduce date range the results come up blank for all results.
An example of the parameters used for one of the checkbox fields in Query Builder is as follows:
Field: SumAnger: Sum([Anger]*-1) Table: Default as only one table Total: Expression Show: Checked
This works fine.
My latest parameters for the date range are this:
Field: [cDate] Table: Default as only one table Total: WHERE Corrected! Whoops Copy & Paste Typo. Too early AM! Show: Checked or Unchecked makes no difference Criteria: Between [From Date:] And [To Date:]
This gives a statement in SQL view of:
SELECT Sum([Anger]*-1) AS SumAnger, Sum([Anxiety]*-1) AS SumAnxiety, Sum([Depression]*-1) AS SumDepression, Sum([Listening]*-1) AS SumListenig, Sum([Psychosis]*-1) AS SumPsychosis, Sum([Stress]*-1) AS SumStress, Sum([Other]*-1) AS SumOther, tblCommsLog.[cDate] FROM tblCommsLog WHERE (((tblCommsLog.[cDate]) Between [From Date:] And [To Date:]));
what I need to get this to work in Query Builder or failing that recommend some VBA script/code with embedded SQL to achieve the required report.
I am working with some chemical compounds in a database I am building. I grabbed an html file off the web on a listing of chemical compounds...converted it to ascii and imported it into ACCESS. Rather than write a Perl routine I was wondering if anyone out there had some sql code that might handle it. The first 3 records look like this and are contained in one field. I am trying to break this guy into 4 fields.
I'm working on a database that has to be done in Access and in coming up with a unique ID for each worker I want to take the first letter of the first and last name and the last 4 digits of their social to create the UID for the table. So for FIRST_NAME:Homer LAST_NAME:Simpson with SOCIAL:123-45-6789 his UID would be HS6789. Is there a function within Access that would allow me to do that, or is that something that's just too advanced?
Is it possible (and logical) for me to create a table with a calculated field from 2 other fields in the same table? Example; I have a long time field (mm/dd/yyyy hh:mm:ss) aka StartTime, and a long time field EndTime. I would like to subtract the StartTime field from the EndTime field to get the total time elapsed, but in hh:mm:ss format. I can get it in hh:mm format, but I really need the hh:mm:ss format. Any Ideas?
I am not sure that I am in the Correct Section for this question but I am sure I can be forgiven for that :
I am attempting to build a db for a friend who has all his data in one table. During normalisation I have seperated the various threads of data into various tables of usable information. My problem is that I need to seperate his clients fullname into First & Surname i.e. Fullname: Mick Burke to FirstName: Mick and Surname: Burke - in other words make two fields from one.