I would like to know is there a way to create a mask on a form for a currency field? I don't want a user to be able to enter in like 125.145. I just want to make it so that people can only type in 125.14. Or how can I write VB code to give a warning when a user enter in more than two decimal places.
Many thanks.
Dave
I would like to know is there a way to create a mask on a form for a currency field? I don't want a user to be able to enter in like 125.145. I just want to make it so that people can only type in 125.14. Or how can I write VB code to give a warning when a user enter in more than two decimal places.
Many thanks.
Dave
Hi All,
My Querie:
I have a relational database, that is basically made up of a few tables, I will
simplify for this to two.
TblFieldNames and TblFieldValues
Basically using a form you can fill in a field (TblFieldNames.FieldName) and it
is then appended to TblFieldValues.FieldValue.
On the form the properties of the input text box are changed according to the
record selected in TblFieldNames.
Ie. ListBox with FieldNames from TableFieldNames
ListBox_AfterUpdate sets properties of
TxtValue
The Issue:
I have a Field in TblFieldNames that has a setting of Currency.
(TblFieldNames.FieldType = "Currency")
I have changed the TxtValue.Format = "Currency"
It doesn't:
A. Allow entry as a currency, ie. $ sign and thousand seperators
B. Append the details to the TblFieldValues Table, which it is going across to
into a field that is set as Text (this can't change)
I have tried:
Changing format of input Txt box
Changing Input Mask for inptu Txt Box
"$###,###,###" but doesn't work for me....
"/$###,###,###"
"/$###,###,###!"
I want it to allow me to enter in the Value as a Currency and append the value as a currency
ie.
Key Press = 12345
Field Shows = $12,345
Appends this value as Text?
Key Press = 1234567890
Field Shows = $1,234,567,890
Etc
Any ideas?
How do I apply this - can't seem to get it right - just want to control user into putting whatever and two deciimals for pence.
99.99 input mask is halfway there - except I don't want to limit the pounds amount. putting 99999.99 makes entering 12.31 etc a little awkward.
Cheers
say I have a drop down list to declare a data type, is it possible to update the input mask for another field based on this data type?
Example:
Input Type A : 000/000/0000
Input Type B : 0/00/000/0000
Seems simple enough with some VB If Then code, I just have no idea how it would be done, and my searches have been ineffective.
Thanks for any help.
I am trying to add an input mask to my video Field, so that it is always enter correctly. V-1-2015, what I have so >"V-"099-0000, but it is showing spaces if nothing is inputted for the 99 fields, if I add in !>"V-"099-0000 it then removes those spaces since those are optional characters, but then the V is no longer capitalized. How can I correctly have an input mask that keeps the V always capitalized and have mandatory fields and optional fields without spaces. I want it to come out as V-1-2015, or V-11-2015 or V-111-2015.
View 11 Replies View RelatedIs it possible to set a double input mask for a field? I would to set it so users can eneter two different values for data field: 00/00/0000 or just the year 0000, is it possible? How do I do that?
View 1 Replies View RelatedI need an input mask for a general date field. When I add the date "11/01/2012 10:00:00" it works fine.
When I add an input mask of 00/00/0000 00:00 it then doesn't work.
I'm trying to set an input mask for a text field.
The data will be 1 to 4 digits preceded by 1/
I have tried the masks 1/####;; , "1"/####;; 1/####;; , "1"/#### , '1'/#### but none work as if the first nubber entered is a 1 it replaces the 1 in 1/
If it is a 2 then it works fine.
I can set the 1 to and f (f/) and it works no problem.
I'm very new to access and i'm trying to write an input mask for a first/last name field where the first letter capitalizes automatically. Is the input mask the correct avenue and if so how do i write it? I can make the first letter caps through the > and continue but i'd like for the rest to continue on indefinitely as to not restrict the length of the field.
View 2 Replies View RelatedHi,
I'm new to this. I'm trying to enter data (it's actually Latitude and Longitude co-ordinates) from an existing Excel source into an Access database which has input masks of 00°00'00.00"L;0;0 (Latitude) and 000°00'00.00"L;0;0 (Longitude) in the respective fields. However I cannot get the information to import or display correctly. I did an "export data" of the respective table (hence fields) to Excel to try and get the correct entry format. An example of the Lat exported was 24°49'41.81"N and Long was 067°01'44.02"E (but with a very small ' in front but only visible in the data entry line in Excel, not in the actual spreadsheet table???)
However when I try to enter the data (even using the exact same little degree symbol, apostrophe, and quotation marks) it does not enter the access fields correctly. On closer scrutiny of the exported Excel format I note a small ' at the very beginning of the 24°49'41.81"N or 067°01'44.02"E string. But as I said previously only visible in the data entry line next to the formula button. Not on the spreadsheet cell.
However even when I "Paste Special" "values only" my new co-ordinates into the same entry location as one exported, it will still not import, or display correctly. If I go into the Access database directly there is a form where if I need to enter the new co-ordinates (using lat example above) I only have to enter 24 49 41 81 N (spaces between) and it will show correctly as 24°49'41.81"N
I'm getting desparate as I don't want to have to change all the details manually. Anyone know what my correct format from an Excel spreadsheet should be?
Apologies for lengthy story! Difficult to describe problem with degree symbols etc
My form contains the field Bill_Date, which may or may not be input during data entry. What I need is to run a query (I think) that allows me to input a specific date that will automatically populate all Bill_Date fields that are currently null with the date specified. Eventually this will end up on the front end where a biller will click on a link when they open the db, input the date into the field, and then process another report.
I have absolutely no idea how to even begin and was not able to locate any specific information in Help or here on the forum.
Many thanks.
HOW DO I DO THE FOLLOWING:
I want to use input mask in my email field i.e the @ must be present but i must be allowed to input values or numbers before and after the @. This did not worked because i have fixed the values: ????@????
thanks
Dear All,
Is there any way that I can use an input mask to enter serial numbers of softwares.....
the data will be like this...
ABC8F-CHJ68-FH76F-GHF87-67JH5
Thanks in advance
Thanks
What I have is field called contract number, and its entered as 09-0011, which is ok.
Now I like it to show up in a different field as 090011. I guess my first question can this be done. Or even better how would I do it?
Now your question is. Why don't you put it in correctly the first time, and the answer is we want the number to have a dash.
Any suggestions
Never can be easy for me.
let's say i have a field, in which i store and identity card number. This number may consist up to 7 digits (of which 3 are mandatory) plus 1 letter (mandatory) at the end. Thus a valid identity card number may be the following: 1234567M, 123M
Eventually, since the field must always contain a letter, i set the data type to Text with field size of 8 ... and i set the inout mask as follows:
9999000L (since the first 4 digits are mandatory). With this input mask, if i have an ID Number of 123M, i have to input it as 0000123M.
Although, I would like to have the leading zeros, is it possible that during data entry time, i would simply type 123M, and i will get the zeros automatically, after the field loses the focus, rather than having to type them myself ?
Thank You
Trying to set an input mask to Capitalize the first letter of a surname but also to do this for ie MacDonald or O'Brian? How can i do this?
View 1 Replies View RelatedWhen you add a new column you can select different data types such as text, memo, currency,...
When I pick currency and typ in 12345 in the column and press tab it automatically puts the € sign behind 12345.....
I am trying to create an input mask for a name field. I have Spanish names with two last names separated by a hyphen, a comma after the two last names, a space, and then the First Name a space and the Middle Name. The First Last Name needs to be in all capitals like the example. Example: NARANJO-Ramirez, Jose Luis
Can someone please help me format this mask. One trick is that there aren't always middle names. Since all parts of the name are different lenghts for everybody, I need to have an optional number of characters for each of the four parts of the name.
Thanks for your help.
I have a text box on a form that holds a grid reference, (2 letters and 6 numbers). I have set the box up with an input mask, (>LL000000;0;_). Is there a way that when the user clicks in the box that the cursor will go to the start of the box. At present it goes wherever they click in the box. If they dont notice then the machine starts beeping at them, most annoying!
View 1 Replies View RelatedI have created an input mask but it depends what type of currency is..
If Me![Currency Counter] = "1" Then
Me![Serial No].InputMask = "LL00 000000"
Else
If Me![Currency Counter] = "2" Then
Me![Serial No].InputMask = "LL-00000000-L"
endif
endif
The problem is that if for example the currency counter = 2 the serial must be
AA-11111111-A but it is saving AA1111111A and i dont want it to save it like this.
Any help pls...
I have a text box that has an Input Mask setup. The box is format to be
##-### (00-000;0;). My problem is, when the user clicks in the box it does not start at the beginning, it starts where ever the user clicks inside the box. Is there way to for when you click inside the box it automatically starts at the beginning?
I have a text box that has an Input Mask setup. The box is format to be
##-### (00-000;0. My problem is, when the user clicks in the box it does not start at the beginning, it starts where ever the user clicks inside the box. Is there way to for when you click inside the box it automatically starts at the beginning?
I have a table that I copy into daily from a shared Excel spreadsheet. I am trying to minimize the amount of touching up the data needs. What input mask should I use so that a field with four numbers...1234 (for example) will be converted to a nine-digit number with leading zeros (000001234) when the data is imported. I would like the nine-digit number to be saved.
Also, is there a way to have a date field import the date only & ignore any text?
Hiya everyone,
I'm try to do a database for items with part numbers.
& I want to be able to set the field to only accept data which has two letters at the begining, but any other characters after that (no fixed size).
ie.
part num1: pn047589sdf8m3
part num2: pn6583
part num3: pnfdgmj5973m
part num4: pn-fdgmj-5973m
Is this possible to do?
Cos all I can do at the moment, is to put a fixed number of characters.
ie. is the field size is 30characters
then I'd have to do this:
>LLCCCCCCCCCCCCCCCCCCCCCCCCCCCC
but this isn't good.
I just need something like:
>LL*
* mean any character for as many characters in length.
Adam
BIGmrC
I am working on a membership database that only has members from Canada and the United States. In the zipcode field, is it better to have two seaparate fields or is there an input mask that can handle both US and Canadian zip codes.
Thanks in advance.
24t42