Creating Filters In Forms Using Parameters
Jan 29, 2013
I am creating a front end of a database that is the forms only version with ext. .accdr...I would like to create a way that each user of the front end can apply a filter using parameters, allowing the user to enter in their name when opening the front end.Form and Table name is "Non-Student Tasks Completed Daily" and "Student Connection Task" Field name is "SSC"..How can I get a box to appear when someone opens the database that askes them to enter their name to apply the filter?
View Replies
ADVERTISEMENT
Apr 3, 2015
The last two weeks I taught myself Access (and hurt quite a few braincells in the process) Yet I am getting close to what I want to achieve, but now I am stuck how to proceed with the following:
I want to have 'forms' view as my main interface for my records. This is working very nicely, and I like how I can scroll fast through all records with my mouse-wheel. I also need to be able to filter records that will be displayed and scrolled through this way, and I created a filter which I can now toggle on or off easily for this purpose.
But now my challenge is, I want to be able to quickly select different filters, so for example, show only forms with a certain date field content. Or filter only forms which have a certain check-box checked. Etc. etc. And later on probably a bit more advanced, like: display forms that both contain 'this' and 'that'.
But I can't find a way to create several different and selectable filters? So this should probably be achieved in quite a different manner?
View 13 Replies
View Related
Aug 26, 2013
I have been tasked to create a report menu for my users to select a report (there are about 20), select which filters that they want to apply to that report, then run based on what the user selected as the filters.
I have about 30 different filters to create, and based on which report the user selects, the filters that apply will need to be shown. I'm thinking the reports will be in an option group, and based on which report the users selects the filters that apply to that report will be displayed. From there the user can choose to apply a filter or not, and run the report.
I am trying to figure out the best way to tackle this. Should I try to create a table that contains the report name and type of filter to loop thru the controls to set visible, and build the SQL?
View 6 Replies
View Related
May 8, 2013
I have a database that I will use for invoicing, but I would like it to automatically create an invoice for customers based on parameters set for that customer (e.g., monthly, biweekly, etc.). I have tables containing the customer information, the item they are being billing, the price, etc. I want to be able to have access automatically create the invoices and add them onto the invoice table each month.
Maybe there is a better way, but I thought that if I created a query for all people that are billed biweekly and all people that are billed monthly, that I could run the queries when applicable and then somehow write a macro that would go through the list of customers and add each of them to the Invoice table and add an autonumber. That way I could click run query, run macro, and then do my invoicing. I don't know if that is the way to go or not.
View 8 Replies
View Related
Apr 5, 2014
I have set up 2 tables, and got the tables linked with a foreign key. These tables store street names and house numbers.Ideally I would like to enter a street name, and then number from and number to, ie: Main Street, from 1 to 30.Each house number will has 4 fields associated to it.
The desired result in a form will be to enter the street name, numbers from and to, and then a sub form open up showing a list of numbers covering the range entered with 4 "Yes/No" fields next to each house number.Some streets could go up to as most as 300 houses, but I would not want that number shown for every street when it is not necessary. only the relevant number according to what is entered.All data would need to be stored and then queries and reports run against it.I am using access 2007 on windows 7.
View 9 Replies
View Related
Apr 19, 2015
I have a search form which suddenly stopped remembering filters between loads. I managed to accidentally replicate the behaviour on a second database where I knew the filters worked - in this case the code was
Code:
Private Sub Form_Unload(Cancel As Integer)
Me.Filter = "(False)"
Me.FilterOn = True
End Sub
Turns out that simply commenting out then uncommenting this section (while the form was open) was enough to break it. Filtering still works, but the form's filter property is forgotten when it unloads, and the only way to change it permanently is in Design View.
So I made a very simple test db with a filtered form, started faffing around with the code while it was open, and lo and behold the filters have stopped working. But I've compared the functional and non-functional versions and I can't for the life of me see what's been changed. I suspect I've run into some kind of bug (not that I should be fiddling with code while in form view anyway) but what can I do to revert it?
It turns out that I can force the filter to be saved by hitting Ctrl+S before I exit the form. Still no clue as to why v1 mysteriously works and v2 mysteriously doesn't. In the meantime, can I replicate Ctrl+S in VBA? I tried DoCmd.Save acForm "FormName", but no luck there.
View 1 Replies
View Related
Oct 18, 2005
I am in the process of upgrading Access b/e to SQL b/e using .mdb and linked table as the front end ( as given as the best solution in many of the posts).
I remember reading in this forum ( Comment made by Pat Hartman) that forms should be based on queries rather than using a filter criteria.
I have a continuous form with project records. The user can double click one of the records to view further details of the project on a separate form. The code I have used to open the form is as follows:
strdocname = "frmProjDetails"
strParm = ""
strLinkCriteria = "[WProjNo]=" & "'" & Me![ProjNo] & "'"
DoCmd.OpenForm strdocname, , , , acFormEdit, , strParm
Would this be a reduction in performance? Should the record source of the details form be changed to a query that has a where clause pointing to the selected record?
Thanks...Priya
View 1 Replies
View Related
Dec 9, 2014
I have a form with 5 options in a group. This works fine when I only have 1 filter applied to each button. I need to select the "Not Collected" button and have it filter out and show "Collected = No" and "Deleted = No". Here is my code..Case 3 is the one I'm currently working on. I can get the others once I figure out the first one.
Private Sub Frame799_Click()
Select Case Frame799
Case 1
[Code].....
View 6 Replies
View Related
Feb 23, 2015
I'm having some issues using the cascading combo box technique on my form.
I have a form, which contains a subform in continuous view, which contains a few combo boxes.
One of those combo boxes (available resources) should be filtered depending on the value of 3 other combo boxes (task types, source languages, target languages).
What I would like to be able to do is run the filtering routine on this resources cbo (currently VBA code that changes the row source value) when the user clicks on it.
It's kind of working right now: when I click on the arrow to open up the drop down list, the values are indeed filtered. The problem I'm having though is that, if I then click on that same cbo for another record (or any other cbo in another record for that matter), the resource cbo of the record I previously set gets deleted.
View 14 Replies
View Related
Sep 24, 2014
I have a number of forms that are bound to recordsets as follows:
Dim rs As New adodb.Recordset
sqlQuery = "Select * from myTable"
rs.Open sqlQuery, sqlCNN, adOpenKeyset, adLockOptimistic
Set Me.Recordset = rs
Set rs = Nothing
In Access 2003, users could open these forms and filter on basically any field by using the right click-> Text Filters functionality.
In Access 2010, this functionality appears to work (users can apply the filter and the Toggle Filter button in the ribbon shows a filter is applied), but all of the records are still visible in the form.
Any work-around that does not involve redesigning the form to be non-recordset bound?
View 4 Replies
View Related
Jan 12, 2014
Is it possible to clear filters set on a subform using a button on the main form?
View 1 Replies
View Related
Jul 10, 2013
Here is the environment:
Currently, I have 10 Users running a front end form that connect to back end data where they add to current records and eventually check that the record is complete.
I also have an "Apply Filter" button on the right hand side of the form that allows the user to apply filters to the records to show specific data that is not complete.
I am currently hearing that while the user is working, whether they apply filter or not, it seems as though all of a sudden, all of their completed work dissapears from their recordset hence not allowing them to go back to make changes to it if needed. I can only conclude that when a different user clicks apply filter, all users are affect some how... here are some examples of the code for the filter:
Code:
Select Case [cboFilterValues] ' Where the user selects a filter parameter from a dropdown
Case "All Data"
strSQL = "SELECT * " & _
"FROM [Data Table] " & _
"WHERE [Complete] = No
Then it does:
Code:
Me.RecordSource = strSQL
I am basically trying to find a way where only the user wanting to view the filter is affected... FYI, the other users arent actually seeing all the filters from the other user filter choice, they simply loose all their completed work from their form.
View 1 Replies
View Related
Aug 15, 2013
In a form I have a button which creates (in preview) an outlook message with a pdf report. It opens and displays just as I want it to, but if I chose to save that message in outlook and either send or cancel (i.e. allowing user to save to drafts and send later) then MS Access crashes.To ensure this wasn't to do with any compile / corruption within my full application I mirrored the process in a very simple 1 table / 1 form / 1 report db and still the same - access crashes after saving the outlook message and either sending the message or cancelling out the message.
Form code is as follows;Private Sub Command0_Click()
On Error Resume Next
DoCmd.SendObject acSendReport, "Table1", acFormatPDF, "someemaddress", , , , "REQUEST FOR INFORMATION"
DoEvents
On Error GoTo 0
End Sub
In my main application this process is embedded within a loop to send various filters of the report to different recipients, which works fine if 'save' is not used within Outlook..
View 1 Replies
View Related
Apr 1, 2015
I am having an issue trying to show all records when I load my form. It loads correctly when I don't have a record source for the main form. However, the combobox filters will not work. My goal is to have users be able to use the datasheet, subdatasheet and combobox filters. I can get the form to work just fine when I link the Main form and subform, but when the form opens it is filtered on the first record. I have been successful with this approach when using other forms, but they didn't require a subdatasheet.
Is there anyway I can have the comboboxes to filter yet be able to show all records until the user selects filters? Is this possible?I finally got my Manager to agree to use a database instead of Excel files based on this form setup and I need to make as "user friendly" as possible (look and function like a spreadsheet) I attached some pics of the form along with the code for the filter.
View 1 Replies
View Related
Jul 10, 2015
Is there any way to add parameters to a .maf shortcut?
I'm thinking, I may be able to email the link to a form to someone, with the correct ID. But I'm assuming this isn't an easy thing to do?
View 9 Replies
View Related
Mar 26, 2014
I am trying to use parameters for my dlookup =DLookUp("[jan]","[ctbDailySegments1]","[PCC]='0hq'")
How can I replace [jan] with a prameter to pick from a text field formated as date. and 0hq from a combobox cmbPCC.
The function works perfectly as I change the jan and 0hq.
View 2 Replies
View Related
Aug 27, 2013
I have 4 tables and around 440 records but can only view up to 417 in the form I have designed. I have been adding new records via form and it has been added to my main table, but when i try to view it in form view - the record is not available to view. What do I need to do to correct this problem?
I have checked that there are no filters, data entry is set to No, Auto deletions, additions and edits are set to yes.
Also to mention it seems that the problem has arisen since I set up some new queries, there is a one to one relationship between the tables!
View 1 Replies
View Related
Oct 8, 2013
i have a form with 2 subforms. when the user selects a record in subform one. the date of that record filters subform 2. in the source query of subform 2 i have this under criteria
Code:
[Forms]![frmeventbuild]![frmBUILD]![EVENT_DATE]
View 3 Replies
View Related
Oct 1, 2007
Hi All
I have set up a form to run a query. There are 3 main variables; 'Status', 'Substatus' and 'Publications'. The publications variable has multiple choices on the form as it is likely i will be sending out more then one publication at a time.
What I need to be able to do is that if a dropdown box is left empty it returns all fields of that variable but at the same time only those that are within the criteria set out by the other combo boxes.. i.e. status is left empty, but the query still runs and filters out those specific substatus and publication. I think this is becoming complicated because the publication criteria relys on five combo boxs.
So in short, how do i get a criteria to return all results for that field if the combo box is left empty but still filter the entire list by the other combo boxes.
I have tried setting the parameter in the criteria as "*" or forms.combobox1 etc but this doesnt really allow for the multiple selections for publictions!
help!, im a little lost.
many thanks in advance
Shapman,
View 2 Replies
View Related
Mar 28, 2014
I have 3 forms that all use the same sub form. The 3 main forms show 3 different project types, where the sub form shows what other projects that a company is engaged with. Rather than create 3 different queries for my sub form, i would like to just filter it using criteria that looks at the CompanyID field on my 3 main forms. Currently my criteria is like this:
[Forms]![frmProjects_Detail_IND]![txtcompanyid] Or Like [Forms]![frmProjects_Detail_CSS]![txtcompanyid] Or Like [Forms]![frmProjects_Detail_TAP]![txtcompanyid]
Is there a way to ignore the parameters that are null?
View 3 Replies
View Related
Aug 26, 2013
I've got a code that allows me to select one or many names from a listbox on a form and return data relevant to the name(s) selected from a query. The following code is triggered by a button on the form...
Private Sub Toggle4_Click()
'Set it all up for CSM selection
Dim db As DAO.Database
Dim qdf As DAO.QueryDef
Dim varItem As Variant
Dim strCriteria As String
Dim strSQL As String
[code]....
(Toggle 10 goes to the code for the second listbox which has the same code with different tables refered to giving two selections in the query.)
What I want to do is replace the "warning if nothing found" with a code to show data against all the names in the list box if nothing is selected in the listbox.
View 13 Replies
View Related
May 20, 2013
I did a query which parameter is written in a text box - tprj. This text box is in a form, which is in a navigation control, which is within another navigation control. How can I refer, in the query, to this text box?
The navigation forms are nmain which contains nprojects.
nmainsub and nconsultprojects are the navigation subforms
fprjconsult is a normal form, which is inside nconsultproject
I tried the following criteria:
[Forms]![Nmain].[form]![nmainsub].[form]![nprojects].[form]![nconsultprojects].[form]![fprjconsult].[form].[text4]
And
[Forms]![Nmain].[form]![nmainsub]![nprojects].[form]![nconsultprojects]![fprjconsult].[form].[text4]
And
[Forms]![nmainsub]![nconsultprojects]![fprjconsult].[form].[text4]
And
[Forms]![Nmain]![nmainsub]![nprojects]![nconsultprojects]![fprjconsult].[form].[text4]
And other forms too but I can't get it right.how to refer to forms inside navigation forms, inside navigation forms, in SQL? What are the rules for writing it clearly?
View 5 Replies
View Related
Jun 6, 2013
There is a command button on my form that calls a filtered query. I'm filtering the query based on a combo box within the form using
[Forms]![frmAssignDwgs]![Combo15]
It works beautifully until I put the form as a subform in the Navigation Form I'm using. When I execute it from within the Navigation form, it errors out looking for [Forms]![frmAssignDwgs]![Combo15].
Is there another syntax I can use so this will still work from within the Navigation Form? Or another way to approach this functionality?
frmNavigation is the main navigation form
frmAssignDwgToPkgs is the subform that holds Combo15
I found another thread (which I can't link to since I'm new) and tried various arrangements of the following to no avail.
[Forms]![frmNavigation]![NavigationSubform] .[Forms]![frmAssignDwgToPkgs]![Combo15]
View 3 Replies
View Related
Jul 28, 2014
I currently have a button that opens a report. the report pulls from a query that has parameters set to "fromdate" and "todate". instead of using dates and parameters that pop up as blank text boxes, I would like to click the button, have a form pop up with a combo box to select all of the options available (currently 23 options) and then click a button to make a report that only displays the record (1-23) selected. I do not need any time constraints because as the databases get updated with more records, there would be more than 23 options to choose from.
View 1 Replies
View Related
Dec 26, 2014
I am creating a simple data entry form wherein the user will enter the product id and on change the product description and retail price must be displayed.
When the order quantity is entered, the total cost need to be calculated. I am able to do this using DLookUp and simple multiplication.
However, after doing the above, I need another row to appear so that I can accomplish the same for another product.
View 2 Replies
View Related
Oct 24, 2005
I have a function button set up to filter my data, if I push the F8 button the filter displays and then enter my filter critera and push F9 this then displays my filtered search results. Once I am finnished with my results I would like to clear the filter so it does not appear in the field again. Once i close my form, or program the filter should be clear and then when I re-push f8 there should be nothing on the filter page. Is this possible?? How can I do this? Thanks
View 2 Replies
View Related
