PROBLEM: i want to search for all the "amount outstanding" that >0 HOWEVER when i put that as the criteria it asks me to enter values for other calculated fields
I have query with a calculate field to finds the next service due date but I'm having a problem getting it to only show services due dates in the next 30 days.for some reason I cant add a criteria date()-30...I have to calculate the next service it takes service intervals from maskservicemonths field then find the last service date and generates the next service due date NextService: DateAdd("m",[MaskServiceMonths],[FindLast]).
I have an inventory transaction file that has quantity on hand as a calculated field. I am trying to add this unbound field to a report using a query but I can't figure out how to add my quantity on hand field to the query since it is a calculated field and not a bound control.
I can't seem to find a problem like this already answered....
I have these two calculated fields:
dtmNPacketDue: IIf([strRevTypeNIRB]="Full" Or [strRevTypeNIRB]="Termination(Full)",[dtmNIRBMtgDate]-28,[dtmNExpDate]-28)
dtmCOIDueDate: IIf([strRevTypeNIRB]="Termination(Full)" Or [strRevTypeNIRB]="Termination(Expedited)","N/A",[dtmNPacketDue]-42)
When I use the one in RED in a calculated field in a new query, things are peachy. But when I use the one in BLUE in a calculated field in a new query, the message is #Error
My Calculated field (which produces an #Error) in the new Query is:
2ndCOINotification: [dtmCOIDueDate]-14
(if I insert [dtmNPacketDue] instead...it works
Perhaps my problem is that dtmNPacketDue (a calculated variable) is part of the BLUE calculated variable....??
I am trying to create a calculated field in a query that subtract 2 fields within the same query.
That is, i have a FiscalWeekStart and FiscalWeekEnd pulling from a table. I created a CountofWeek field that count the weeks between the FiscalWeekStart and End using "DateDiff("w",[FiscalWeekStart],[FiscalWeekEnd])".
I also have a HolidayWeek field that pulls from a table using a Count expression in the query.
My goal is to subtract the CountofWeek and the Holiday week calling it NonHolidayWeek using "NonHoliday Week: IIf(IsNull([CountofHolidayWeek]),[CountofWeek],[CountofWeek]-[CountofHoldayWeek])"
BUT IT IS ASKING FOR PARMETERS ON THE "CountofHolidayWeek".
It all works fine and dandy, but once I set it to sort by this field and run the query, it gives me the parameter prompt, asking me to enter the Parameter Value of FieldA and then for FieldB.
Is there a work-around for this within the query?
The only other solution I have in mind is making another table from this query, and then creating another query just for sorting said table, but that seems inefficient at best.
I hope someone can help as I am stumped at present. I have created a calculated query using dateadd. I have a table that has date fields, ServiceContractAgreed and ServiceFrequency. The service frequency field holds a value of 3,6,9 or 12 in months. Using dateadd I can add the months to the ServiceContractAgreed field in a field called NextService, ie =IIf(IsNull([ServiceContractAgreed]),"N/A",DateAdd("m",[ServiceFrequency],[ServiceContractAgreed])) This works fine but what I want to do now is create a parameter query to search the NextService field, using the between operator to search between dates. I've created a new query to do this but get every record back, no matter what dates I put in. It's probably something really simple to do but I'd be really grateful for any advice!
I have a field that contains semester info ie: F07 Sep.
What I am trying to do is using an if statement to test for which month and returning a section number based on the month. I can make it work using an exact match but am trying to make it work on the partial match "Sep" so I don't have to change it next year as F07 stands for Fall 2007
This is what I've tried and various combinations. Section1: IIf([tblOnlineCoursesDetails]![Semester]="* Sep","70","")
This is not the normal calculated fields in query's. What I want is different, I want it to be like
IFF(ShowID="A",[TotalSales],0)
Thing I have is, I want to know all the Total sales in on row that has Show A in it and then Total sales for Show B. Problem is, I have over 130 shows. How would do that?
I Have some calculated fields in a query and want to update it in the table .So,is there anyway to store these fields.Otherwise can i store this Query data every month in database so that when i re-run the query the previous month data will not be affected.
I am having a problem with calculating a date field in a query. Prior to this posting I've done some research and made several changes to my query. This only resulted in fixing one problem but then creating another problem. Original problem was I had 2 fields, arrived (23:36) and stemi (0:07). I use the following calculation AT_ST: DateDiff("n",[arrived],[stemi]) which resulted in -1409. So my research showed me I had a problem with the date whenever the time went past midnight and trying to calculate a zero hour number. I changed my calculation to
AT_ST: IIf([stemi]>=#11:59:00 PM#,(DateDiff("n",[arrived],[stemi])),(DateDiff("n",[arrived],[stemi]+1440) Mod 1440))
This works fine and gives me the result of 31 minutes which is what I want, however the problems comes in when I change to this calculation any where there was a negative time now has a 1400+ plus value. Such as arrived (7:37) and 1st_eck (7:18) = 1426 where as before it would report -14 (yes, negatives are acceptable for my reporting because sometimes a call to the hospital is placed before the patient arrives so we want to report on the negative splits). I've tried using a nested IIF to calculate for stemi time being less than arrived time, this didn't work when I tried to use it on the calculated query field. I was wondering if I could write something to check the value of the calculated field if it is greater than 1440 and if yes - subtract 1440 from it. So in the example above 1426-1440 = -14. Is it possible to do this within the query or do I need to do it using VBA
So I have the following query field which calculates another field.
How do I Filter the records in this calculated field to only return TRUE, as if I put "TRUE" in the Criteria for this field (or anything at all) then a parameter message box pops up asking for [Balance].
Order ID(Autonumber) Client ID(Text) Client Name(Short Text) Install Gross Rate (Currency) Install Discount Given in % (Number) Install Discount Given in GBP (Currency)
Then I designed a Query to calculate the Install Net Rate
Query
I selected Client ID Client Name Order ID
Expression: [Install Gross Rate]*(1-[Install Discount Given in %]/100)-[Install Discount Given in GBP]
I run the query, but only ONE order calculated correctly, rest of Orders returned blank row.
I want to calculate a field that is Sales*6+Salary, then in that same query I want to select ONLY the greatest Salary per employee. So for example
SELECT EmpId, MonthDate, Sales, Salary, [Sales]*6+[Salary] AS SalTot FROM EmpTable S1 WHERE SalTot = (SELECT MAX(SalTot) FROM EmpTable S2 WHERE S1.EmpId = S2.EmpId);
Can I not select a value that has been calculated this query?
I went into the properties if that field inside the query design and changed it to Standard with 0 decimal places and it worked fine.
But when I based a crosstab query off the query that contained the above calculated field, I cannot seem to get the numbers to format correctly. 1231313.424 is shown instead 1,231,313 and I don't have a line in the Properties window to even change the decimal places. It doesn't recognize when I change the format to Standard. I have tried using Round([ProjRevNRC]) which gets rid of the decimal places as desired but does not show commas.
I'm sure it's a simple part of the Round expression that I am missing but nothing has worked.
I am looking for a way to add a calculated field to the end of an existing query using VBA. Is there an easy way to do this?
The data I receive from an external supplier shows monthly data split by column with a new column added in each month. I then need to reflect this by adding a new column to the end of the query. It is currently a manual tweak, but I want to automate this with code.
I have a table with numerous fields including timeIn and timeOut field (these are date/time format). I need to find out how many people were clocked in during each operating hour (based upon their time in and time out). How can I run a query that will allow me to use the times in and out to 'flag' each hour that each person was on duty (a new field for each hour) so that I can run a count on the completed data for every hour?
I've can do this on excel but don't know how in Access. I'm calculating bonuses. My table has salaries, and my query simply multiples each salary amount by a % to get the bonus amount. But I need to calculate adjustments to the bonuses using the sum total of the bonuses my query calculated:
Salary (from table) Bonus (calc'd by query) Adjustment (to be calced)
100,000 1,000 Sum of total bonuses/salary*4% 90,000 900
How do I capture the total of my calculated bonus column to use to calculate the adjustments in my right-most column?
I have a simple calculated field (As "Ratio") that is readable in Access 2010 query, but crashes in Excel upon importing/running the query in an .xlsx table.
ERROR MESSAGE in EXCEL: "The query did not run, or the database table could not be opened...check database server..contact your database administrator.."
I am simply taking the cost amounts of each project record (shown as "Record Cost") and dividing it by the "Total Cost" of that project to render "Ratio".
The Total Cost is retrieved from another table.
Testing scenarios: If we exclude Ratio, the whole query import just fine. If we filter the query to one project (i.e. "Project A") the ratio field imports fine.
However, the whole unfiltered query does not with the ratio!
Other testing scenarios:
If we use a constant for the denominator AS "1" in Ratio (i.e. recordcost/1) the whole unfiltered query and ratio field imports fine.
If we use a constant for the numerator AS "1" in Ratio (i.e. 1/totalcost) the whole unfiltered query upon import crashes in Excel.
This is a mock example of the dataset, the actual query has 50K+ records:
Project Service Date Record Cost Total Cost Ratio A Welding 1/1/2012 $100 $120 83% A Plumbing 2/1/2012 $20 $120 17% B Welding 1/1/2012 $50 $75 67% B Plumbing 2/1/2012 $25 $75 33% C Welding 1/1/2012 $40 $61 66% C Plumbing 2/1/2012 $21 $61 34%
I am trying to construct a crosstab that averages a calculated field from a previous query. It is returning a "Data Type Mismatch" message.
The field I am trying to average is a subtraction of dates to find total days. I assume my field is not a number so I have tried to wrap it in CDbl() to change the type.
The formula is
Code: CASE_DAYS: CDbl(IIf([Actual Close Date]-[Creation Date]>=0,[Actual Close Date]-[Creation Date],""))
My query contains two calculated fields [TaxSavings1] and [TaxSavings2], which are based on some currency and number-type fields in one of my underlying tables.
I just created another field in my query which looks like: [TaxSavings1]+[TaxSavings2]. Instead of adding the two fields, it actually lumps the two numbers together. For example, if [TaxSavings1] =135 and [TaxSavings2]=30.25, it will give me: 13530.25. I need it just to simply add, i.e. answer of 165.25.
Does anyone know how to correct this? Thanks in advance.
I am not sure how to search for this so if there is another thread with this example please direct me in that direction. What I am trying to accomplish in my query is the following: I am bringing data in from another source in the following table
ID Date1 Date 2
I want a query to do the following based on dates entered on the switchboard in a beginningDate field and EndingDate field
ID Date1 Date2 Final1 FInal2
If Date1 is between beginning and ending date I want it to put a yes in Final1 if Date2 is between beginning and ending date I want it to put a yes in Final2. Both can have yes'.
I tried doing an if statement in my expression as follows: IIF([Date1] between [Forms]![FrmSwitch]![BeginningDate] and [Forms]![FrmSwitch]![EndingDate], "Yes", "") but nothing comes up. My switchboard is always open with the dates in an unbound field.
