I have a query in Access with the following fields (grouped):
"Name" "Facility" "Number of Visits"
I want to limit the query to only pull those names that have at least one visit to a specific facility (let's say facility "A"), but I also need to see all of the other facilities that those who visited Facility A visited. So in this case "= "A"" in the criteria section of the Facility field wouldn't work. I think I need to plug something in the criteria section under the Name field, but I am not sure what.
I have a main table which is autonumbered on unitid, I have another table which is linked via the unitid which holds items purchased for the main table, so the second table is a subform of the suppliers and will have multiple entries of the same unitid. What I would like to do is when an item is entered into the second table, check the main table to see if it exists, if it does populate the unitid field with the unitid from the main table, and if not exist create a new record in the main table with the next unitid number.
This in essence is what I want, bearing in mind that the tblinvoices is a subform and the tblmain is not open.
If ([tblinvoices]![Unit] = [tblmain]![Unit]) Then [tblinvoices]![UnitID] = [tblinvoices]![UnitID] End If
Hey guys, apologies in advance for a question which you may have answered many times, I have searched the net, my textbook and these forums but to no avail.
I have a table, 'tblStock'.
I have two fields within this table, 'Stock Level' and 'Minimum Stock'.
I want to run a query on this table, finding all records where the value in 'Stock Level' is LOWER than the value in 'Minimum Stock'.
How would I go about setting up this query? What criteria would I type? I have tried typing <"Minimum Stock" in the criteria for 'Stock Level' but it didn't work.
Is there a way in a query (using SQL) to go to the first record to update a field based on a criteria ? For example if my amount field shows two amounts for $300.00 I want to go to the first record that has $300.00 to update a field in that record.
I am building a database that calculates freight costs for shipments.
I have one table that has order data with fields such as [Order Number], [Origin], [Destination], [Service Level], [Weight].
The service level is one of 4 values: PRE 9, PRE 12, NEXT DAY, NEXT DAY +1.
The origin and destination use country codes such as BE, AT, CZ, PL for Belgium, Austria, Czech, and Poland respectively.
I also have rate sheets from carriers such as DHL and UPS and they provide their rates in the following format (numbers are made-up as real rates are confidential): [Origin], [Destination], [Service Level], [0 to 0.5 kg], [0.5 to 1.0kg], [1.0 to 1.5kg], [1.5 to 2.0kg], etc all the way up to 30kg. The rate is then in the appropriate column and the row gives the origin-destination-service level combination.
(sample freight rate table uploaded as zipped excel sheet in attachment)
I need to return the rate from the appropriate row based on the [Origin], [Destination] and [Service Level] fields (easy enough), which is easy enough.
The hard part is selecting the correct field to return. I tried usign a Choose expression but Access rejected it saying it was too complex (maybe because too many choices?).
So I'm stuck. And working towards a deadline... :-)
Maybe it's the day's 'brain drain', but I need to set a criteria in a query whereby it will select answers in a field that are a specific number of characters in length. i.e., answers that are 5 digits long (without knowing any of the digits)
Hi all, Been pulling my hair out about this for a while, so i hope someone's feeling kind:
http://www.agga.dsl.pipex.com/pics/AWF01.gif
I'm using the BHRefPrefix to build part of a reference number. The Principal and Site exist on a separate form, and i need to use both as criteria in order for the correct BHRefPrefix to be returned.
I sort of get it working using two joins, but it doesn't let me add any new records. I've tried straight queries, queries with DLookup expressions, and i just can't get what i need.
I have two tables of data. One contains balances for a set of accounts (one unique balance per account, per date). The other contains transactions for a subset of the accounts (multiple records - or possibly none at all - per account, per date)
I'm trying to write a query to return the sum of the transactions from the Transaction table, for each unique account + date combination which is present in the Balance table.
Here is my SQL :
Quote:
SELECT tblBalances.BalDate, tblBalances.AccountID, Sum(tblTransactions.Amount) AS SumOfTransactions FROM tblTransactions RIGHT JOIN tblBalances ON tblTransactions.AccountID = tblBalances.AccountID WHERE (tblTransactions.TransDate=tblBalances.BalDate) GROUP BY tblBalances.BalDate, tblBalances.AccountID;
This works fine with one major problem; if there are NO transactions for any given account + date in the Transaction table, I get no record for that combination in the dataset.
What I need is for the query to return a 0 in those situations (i.e. I should have as many records in my queried dataset as there are in my Balances table, but SumOfTransactions may be 0 for some of those balances)
I've tried the following but it has no effect on the outcome :
Quote:
SELECT tblBalances.BalDate, tblBalances.AccountID, Nz(Sum(tblTransactions.Amount),0) AS SumOfTransactions FROM tblTransactions RIGHT JOIN tblBalances ON tblTransactions.AccountID = tblBalances.AccountID WHERE (tblTransactions.TransDate=tblBalances.BalDate) GROUP BY tblBalances.BalDate, tblBalances.AccountID;
Quote:
SELECT tblBalances.BalDate, tblBalances.AccountID, Sum(Nz(tblTransactions.Amount,0)) AS SumOfTransactions FROM tblTransactions RIGHT JOIN tblBalances ON tblTransactions.AccountID = tblBalances.AccountID WHERE (tblTransactions.TransDate=tblBalances.BalDate) GROUP BY tblBalances.BalDate, tblBalances.AccountID;
I have a temporary table with Yes/No fields (F101,F102,F103,....etc). In another table i have a field called ProductCode with values (101,102,103,....etc) Is it possible to append(or update) the records of the temp table with criteria on "F" &ProductCode field? (For example if ProductCode=101 then F101 sets to yes)
I want to get remarks as like this i have a query which is showing the total of different fields suppose the total is 77 and I want to give a crietria field by name of net level which shall work like this ..
if the number is from 0 to 33 then then the result should be C-1 if from 33 to 40 then C-2 if from 41 to 50 then C-3 if from 51 to 60 then B-1 if from 61 to 70 then B-2 if from 71 to 80 then B-3 if from 81 to 90 then A-2 if from 91 to 100 the A-1
I am trying to get the max of an integer field if the ProjectNumber field is equal to the ProjectNumber field in the current record. I have used code similar to the one below before but it was on a date field, then add one.
I have a form that consist of many fields that the user needs to manually input data. 3 fields on that form are the criteria i need to determine which pricing to use back on the table. The first field, which name is LTYPE, is a combobox that the user needs to choose as its type (i.e 500,501,600,700). The second field, which name is EastCoast, is a checkbox (Yes/No) that tells me if it's East Coast (East = yes and West = No). The third field, which name is NewRenewal, is a combobox that the user chooses NEW or Renewal).
Example 1, if the user chooses type 501, checkbox is YES for East, Product is NEW. Then the pricing is $4,100
Example 2, if the user chooses type 700, checkbox is unchecked for NO (which is West), Product is Renewal. Then pricing is $3,300
I would like the unbound field to auto determine the pricing based on the 3 criterias chosen. I read around the forums that Dlookup would be the function for this, however, i tried many times but it did not work.
I have table with filed with jobs that our IT’s have done for that day, the table is updated daily, based on my table I have created my query, I have set some criteria for some fields though, as follow:
Month = [Forms]![DailyWorkForm]![commonth] Year = [Forms]![DailyWorkForm]![comyear] ITName = [Forms]![DailyWorkForm]![comit] Day = [Forms]![DailyWorkForm]![comday]
on my form I have commonth, comyear, comit, comday and a command button that will open a report based on the query which will be based on my 4 combo boxes on my form, ok I hope I didn’t make you all really confused, this is the question what if the user inputs on 2 combo only, meaning that if month = may and year = 2005 and left ITname and day empty, I still want the query to run, how can I do that?
I have created a db where I need to run a report based on randomizing. Basically there is a table ORDERS that is updated daily with orders from clients.
Table structure is: ORDER ID (autonumber). CLIENT. ORDER. Quantity, Date.
Sampling criteria is: if number of Orders is from: 1-10 show me 90% of them 11-20 show me 85 % of them 21-100 show me 51% of them etc
I did found this code for the randomizing with autonumber:
Private Sub cmdSelect_Click() Dim SQL As String Dim sWhere As String Dim iCount As Integer Dim i As Integer Dim j As Integer Dim iSelectHowMany As Integer
I have a table where the columns are team1, team2 and winner. Team1 and team2 are comboboxes that show all the teams in Team table. After I pick the team1 and team2 in a row I want to make a listbox that shows only those two teams as options for the winner.
My database tracks individuals qualifications. These qualifying scores relate to Unqualified, Expert, Advanced etc. What I want to do is add a entry into my roster table which will have the qualification score. I then want to have the score and actual qualification (Advanced, Expert, etc) in a Report. The qualification type is a range (less then 30, 31-40, 41-50), and I think that I will need a BETWEEN statement. What I am not sure of is how to put this together to make it equate the number with the equivalent word in a report.
I've got a database that pulls from a table. One of the options on the table is pending or complete. Right now, there are over 1000 records because they are all stored in the same record. I'd like to move the completed items to a different table.
Can this be done? If so, what steps do I need to take to do this?
I am endeavouring to filter a form based on the position of an individual. I would like the users to be able to select their position and then any record where there is a match in the "Primary Responsibility" field or the "Secondary Responsibility " field will be displayed.
I have an underlying query that is populated by a combo box on an unbound form.
This has worked when generating reports for individuals but I cannot get the required result when using the form.
Thanking anyone in advance who can assist me with this.
I am not sure if this possible, the methods I have looked up on the Internet take ages for the query to open but I'll give it a shot.
What I need to do is count (and increment) how many records are returned in a query for each person.
So if 1 person returns 4 unique records, in these records it shows 1,2,3,4 in each record.
The way i have tried is by using DLookup to check the next record and evaluate it using IIF but this takes about 25 seconds to return circa 50 records.
I have a query that is set up to join two name fields...for example:
[ELIGVENDORS.LSTNAM] & [ELIGVENDORS.FSTNAM]
The issue is that this is perfect for names that are entered in the table like this:
Lstnam: ABC HOSP Fstnam: ITAL
They are entered like that for groups, but when individual doctors are entered, the data entry folks are entering them like this:
Lstnam: SMITH Fstnam: BOB Titlcd: MD
So when I join them the first displays correctly as ABC HOSPITAL, the second displays as SMITHBOBMD and I have to manually go in and add a comma.
Is there a way to do an if/then statement or something to tell the query to display results If the titlecd is NOT NULL, display as [ELIGVENDORS.FSTNAM] & [ELIGVENDORS.LSTNAM]&", "&[ELIGVENDORS.TITLCD], else display as [ELIGVENDORS.LSTNAM] & [ELIGVENDORS.FSTNAM]
I'm sure there is, I am new to IF/THEN statments though and was hoping to get some help setting it up.
Thanks in advance and I hope my description is clear enough.
Very very new to Access, moved department a week ago and inherited a couple of databases that need tweaking. Although I'm learning I am stuck by something very simple and can't find it by searching this forum or Google :)
I have a query that originates from 2 tables, there is one custom record made from 2 of the fields -
Free Stock: [stk_stkqty]-[stk_allstk]
Now I want a record that shows -
Product where the free stock = backorder stock
so theroetically my guess as a beginner is -
SELECT * FROM [Product] WHERE [Free Stock] <> [Back Order]
But it fails miserably on syntax. Can someone point me in the right direction, and I apologise for my lack of understanding in advance.
I have a form (say Form X) that opens based on the ProjectID criteria in the query, which is based on a record selected from Form1 [ProjectID].
I want to be able to open Form X using information from 2 forms - Form1 or Form2, both using ProjectID. What I've done so far works, but I get an Enter Value Parameter looking for the other Form. How do I write the statement so that it reads Form1 [ProjectID] and if that is not open (null??), then it goes to Form2 [ProjectID] and vice versa?
What I have is:
IIf(("IsNull[Forms]![FrmAddPrjInfo]![ProjectID]"),[Forms]![FrmPrjRvwerMgrDue]![ProjectID],0) Or IIf(("IsNull[Forms]![FrmPrjRvwerMgrDue]![ProjectID]"),[Forms]![FrmAddPrjInfo]![ProjectID],0)
Variations of this haven't worked. Perhaps IIF statement is the wrong way to go about this?
I have a problem with opening forms.I have situation with 8 forms (small ones!) which must be open based on values in ComboBox1 and ComboBox2. Can I do it with Select case (DoubleClick event), and how?
Hi there i am building a search form and I want it to be able to display results from multiple criteria......Currently I am able to display results in a listbox, whenever the user types in a id number in a text box. So if a user types 63 in the ID text box the record with and ID of 63 will appear in the list box or it will wont if the record does not exist..... What i want to do is be able to search on multiple criteria. Sof if a user wants to search based on a name instead of a id number they woudl be able to. What I am struggling to grasp is how to invoke a OR in the criteria box. So that the list box will display results based on either the ID text box OR the name text box.