is there any way to make a cross tab query default to zero instead of nulls for unpopulated cells
i know i can Nz all the resultant fields, but it seems like treating the symptoms and not the cause...
:confused:
In my Accounts table I have a field called Status. This field is populated by single letters. A=Active, P=Paid and so on. I have a status (R) that is occasionally used. It won't show up in my crosstab queries since we currently do not have an account that is in R status. How can I get my crosstab to show the R status as having 0?
View 3 Replies View RelatedI've been struggling with a problem and I hope one of you can please help.
I created a crosstab query that displays group names on the vertical axis and dates on the horizontal axis. I use a Count for the values. I use a pop-up dialog to get parameters for the dates (between... and), which are organized as Quarters. The query works fine and I can insert it into a report, which also works fine... with one problem. The dates only work when the date parameters request a year (4 quarters), and only work when each quarter has at least one entry. (Only work = I get an error message when one or both of these conditions are violated.)
Sometimes, I want to look at less than a full year, but when I use parameters for three or fewer quarters, I get an error. Same thing if I request a quarter that doesn't have any data. I assume the solution is to convert Nulls to Zeros and have wrestled with both Nz function and IIf, but have not been able to convert the values. I get the correct values in the quary's dataset if they are numbers, and blanks if no data, but no zeros anywhere. I also don't know how to make my report flexible or dynamic, so I can limit the number of quarters if I only want to look at a specific quarter or quarters (less than four).
Any ideas? Thank you so much for your time, and, Happy Holidays!
Stu
So, I've been doing doing reading on Append Queries and Nulls. I have the following SQL statement
INSERT INTO tblTestResults ( EnrollmentID, TestType, Result, CompletedDate, BoldFace )
SELECT tblEnrollment.EnrollmentID, tblTests.TestsID, [Forms]![frmHome]![subfrmTesting]![txtResult] AS Result, [Forms]![frmHome]![subfrmTesting]![txtCompletedDate] AS CompletedDate, tblOptionsBF.OptionsBFID
FROM tblEnrollment, tblOptionsBF, tblTests
WHERE (((tblEnrollment.EnrollmentID)=[Forms]![frmHome]![EnrollmentID]) AND ((tblTests.TestsID)=[Forms]![frmHome]![subfrmTesting]![cboSelectTest]) AND ((tblOptionsBF.OptionsBFID)=IIf(IsNull([Forms]![frmHome]![subfrmTesting]![cboSelectBF]),0,[Forms]![frmHome]![subfrmTesting]![cboSelectBF])));
and I can't for the life of me figure out.
IIf(IsNull([Forms]![frmHome]![subfrmTesting]![cboSelectBF]),"",[Forms]![frmHome]![subfrmTesting]![cboSelectBF
Basically what I'm trying to say is that if the cboSelectBf is Null, then leave it null for the the append query or at least leave it blank. If it isn't, use the value that cboSelectBF has according to the combo box selection.
Any help would be greatly appreciated.
I want to obtain the value of a third variable using the first one as row heading and the second as column heading. I can't get this using a cross table query.
Is there another way of doing it???
Thank you
I've recently been having a few problems with getting a cross tab query to work. I'm currently using MS Access 2000.
I've created a query that I know want to use for the basis of my cross-tab.
I'm only after having it produce a tab of Part Type by Month using a count of all Clients.
When I use the wizard it sorts everything out fine, but when it runs I keep getting the same error message:
"The Microsfot Jet database engine does not recognize "[Start Date]" as a valid field name or expression"
In my main query I have it set so I can choose a date range using the criteria "Between [Start Date] and [End Date]" Is there a way of getting a cross tab to work using a user defined date range. I've also got fields that I have changed the column names on, EG. ClientName to Client Name (Client Name: ClientName) it is also having issues with these.
Any help would be very appreciated.
G'day,
I am looking to create a cross-tab query that sums multiple columns together.
A simplified version of the data is as follows
ID Date Column2 Column3 Value
123 2007/05/15 T 1 30.00
123 2007/05/15 T 2 50.00
123 2007/05/15 T 3 15.00
123 2007/05/15 T 4 10.00
123 2007/05/30 T 1 60.00
123 2007/05/30 T 2 25.00
123 2007/05/30 T 3 15.00
123 2007/05/30 T 4 16.00
146...
The desired output is as follows
ID column1(Sum of T1) column2(Sum of T2+T3) column3(Sum of T4)
123 90.00 105.00 26.00
146...
Where T# is a concatenation of column2 and column3.
Currently using the cross-tab queries I am able to get the following output:
ID T1 T2 T3 T4
123 90.00 65.00 40.00 26.00
146...
But how can I add T2 and T3 together?
Any help would be greatly appreciated keeping in mind that I am new to Access. Thanks!
I can't get the data to display as I want it. I haven't done a lot of Crosstab queries, so I need someone to clarify the field settings....
I have Pallet ID's which contain Multiple UNIT ID's
so this...
PALLET-1UNITID-1
PALLET-1UNITID-2
PALLET-1UNITID-3
PALLET-1UNITID-4
PALLET-1UNITID-5
PALLET-1UNITID-6
PALLET-1UNITID-7
PALLET-1UNITID-8
PALLET-1UNITID-9
PALLET-1UNITID-10
should look like....
PALLET
PALLET-1UNITID-1UNITID-2UNITID-3UNITID-4UNITID-5UNITID-6UNITID-7UNITID-8UNITID-9UNITID-10
the unit ID's must be on the same row as the pallet record, it can be a string in one cell
Hi,
I have a small problem with a cross tab query. The query works perfectly when i run it and displays the data in the way i would like it to, i want it to be on a form though and when i try and do this i get problems.
I get either a message saying i have possibly chosen a query with no output fields or a microsoft doesnt understand the name of my query.
I have looked at 'cross tab querys' and 'cross tab query forms' in the search facility and have tried some of the suggestions which people have given to similar problems to mine. For example basing another query off my cross tab query and using that for the form, but it just does brings the same problems.
I would appreciate any help, thank you.
Hi
-Is is possible to make a parameterized cross-tab query? I want only to display data between certain dates and for a specific crew.
-Also, for data in the query I have the Line number (of the machine) as the row headers and the Problem names as the column headers. I also want to display the problem CATEGORIES (of the problem names) above the names. How do I do this???
:confused:
Hi - I've just followed a tutorial to create a simple parameter query based on the input received by 2 combo boxes on a form. This works ok, you select the 2 values on the form - the form passes it to the query which runs, the form closes and the query is displayed - all ok.
What I would like to do, is to display the results a bit more elegantly as the end users that will use this little database won't really like to see the query window. Is it possible to display the results on the bottom of the form? So that each time you click "Ok" on the form, it re-runs the query and displays the results. Any help would be great - but you'll have to explain it simply for me as I'm a newbee to all this! Thanks in advance:eek:
I am trying to create a cross tab query which will output the data for only three months starting from the recent month. I would want these months to be heading. However, I don't want to create reports over and over again. I want something, that will resolve the issue through parameters kinda thing. I don't know, if this can be done or not. Right now I have the cross tab query for all the months, but I have to manually choose the months to fit in the page. I hope I am making sense here. I didn't know where to post this, in query or in report. Therefore, I am posting it here.
Thanx in adv.
Hi,
I have created a form that is based on a cross tab query. I have a set number of fields in the form (1 day, 2 days, .....10 days).
The problem is sometimes when I run the query some fields disappear. for example for no records have an entry in the '2 days' field.
When this is out through the form then that whole column will read '#Name?' for all entries.
Is there some way I can clear the '#Name?' entry or replace with a zero on the form?
Hope anyone can help!!
Thanks!
I have an access 2000 database and i want to make a cross tab query with 2 column headers but access doesnt allow thatI decide to make the inverted cross tab query and its okbut now i want to use this in a report but invertedex product type client1 client2 client3 a 1b 2c 3 product a product b product c type 1 type 2 type 3client1 client2 client3
View 3 Replies View Relatedhow to combine 3 cross tab queries values into one daily progress report, transpose format. The values from each crosstab query are
1) Spent hours
2) Qty installed
3) Earned hours.
I try to create a cross tab query via SQL.Somehow the below code return me a Run-Time Error '3000'.
Code:
Sub TEST2()
Dim strSQL As String
DoCmd.SetWarnings False
[code]...
Hi,
Not able to add more column heading in cross tab query.
I tried to change the query properties to add more column headings as given below.
In the query's Design view, right-click up in the area where your tables are shown and choose "Properties" from the right-click menu. The 3rd line down is for Column names. Enter what you need there.
Evn after doing it. i am not able to .
Whn I try to save or view the datasheet it says. to create a crosstab query u need to have one or more row headin one column headin and one value.
please help. its ver urgent.
thanks in adv..
I have a cross tab query. Essentially it groups together posted volumes into week numbers for different offices.
However, when I run the query, the order of the columns is not in a logical number order. I get Week 1 then Week 10 then Week 11 and Week 2 is further down the list and then Week 20 comes after that.
I would like if at all possible the Week Numbers to follow after one another i.e. Week 1 first then up to Week 52 in correct number order.
In my Dates Table I do have a SortID column which I hoped would resolve this issue so I could sort on the SortID column however this fails to work.
Attached is the query...
Code:
PARAMETERS [Forms]![frmSumOfVolByCCAndFormat]![cmbOfficeSearch] Text ( 255 ), Forms![frmSumOfVolByCCAndFormat]![txtStartDate] DateTime, Forms![frmSumOfVolByCCAndFormat]![txtEndDate] DateTime;
TRANSFORM Sum(tblTrafficEast.TrafficVolume) AS SumOfTrafficVolume
SELECT tblOffice.CostCentre, tblOffice.OfficeName, tblTrafficFormat.Format, Sum(tblTrafficEast.TrafficVolume) AS [Total Volume]
[Code] ....
I asked 18 people to each sort 100 statements into piles based on the similarity of the statements. The results are arranged as below.For example:
- Bob sorted statements 1, 3, and 100 into the same pile (Pile ID = 5), and statements 2 and 4 into the same pile (Pile ID = 2).
- Mary sorted statements 1 and 100 into the same pile (Pile ID = 3).
Code:
SubjectID StatementID PileID
------------------------------
Bob 1 5
Bob 2 2
Bob 3 5
Bob 4 2
[code]....
I need to create separate summaries for each Subject. The summary should indicate, for every possible pair of statements (1 & 1, 1 & 2, 1 & 3 ... 100 & 100), a 1 if the person sorted both statements into the same pile and a 0 if they didn't. Identical statement pairs (e.g., 1 & 1) should always get 1.
Code:
StatementIndex1 StatementIndex2 Similarity
1 1 1 (identical statements always get a 1)
1 2 0 (Bob did not sort statements 1 & 2 into the same pile)
1 3 1 (Bob sorted 1 & 3 into the same pile)
1 4 0 (Bob did not sort 1 & 4 into the same pile)
[code]....
I'm assuming a crosstab query is a start, but I couldn't figure out how to set it up.
I want to present some data in what seems to me like it would be a very natural and normal format, however have so far been unable to figure out how to do it.I record attendance data for a children's after school club in a table as follows (simplified):
AttendanceID - autonumber
AttendeeName - text
AttendanceDate - date
Attended - True / False
The data looks like this in the table. I would like to be able to easily see who attended on which days, so I would like to therefore see the data laid out like this:
The Crosstab query looks almost like it would do what I wanted, however it seems to insist on adding something up, rather than just showing me the value true or false.
I have a dynamic cross tab query - thus the column headings will change each time it is run.
At present the column headings are displayed in alphabetical order - how can I change this so they are based on a different order - eg by the descriptions corresponding ID
I have a cross tab query that displays data by customer (rows) and MONTHS (columns).
However I need the columns to be the 12 months of the year 1 to 12.
However, if the selected data for a particular customer does not have any records in a month then I get an error in the report as the cross tab query only selects the months with data.
How do I get the report to show 0 or a blank in these columns
I just wanted to know how can i set a parameter on the following cross tab query to filter dates. Date field is [pdate By Day].
TRANSFORM Sum([PettyMaster Query2].Amount) AS SumOfAmount
SELECT [PettyMaster Query2].[Petty Cat].Field2, [PettyMaster Query2].[pdate By Day], [PettyMaster Query2].ProjLoc, [PettyMaster Query2].descriptionofpay, [PettyMaster Query2].projno
FROM PettyMaster, [PettyMaster Query2]
GROUP BY [PettyMaster Query2].[Petty Cat].Field2, [PettyMaster Query2].[pdate By Day], [PettyMaster Query2].ProjLoc, [PettyMaster Query2].descriptionofpay, [PettyMaster Query2].projno
PIVOT [PettyMaster Query2].PettyCOA.Field2;
I have 4 queries in which data needs to be connected from the date and shown as a single date showing each sections entry in a row and a cumulative total is maintained as the balance .
See the attached image ...
Hi there,
I have 4 fields in a table(Call_Freq, Call_Week, Call_Day, Call_Sequence)
I have to make a query that finds records with Null values in these fields.
If they are all null that is fine so I only want to return records with either one, two or three of the columns with Null values.
Any help would be appreciated.
Hey guys,
I'm doing a pretty basic query that
Selects about 5 fields
From Table1
Where
(value=0 AND name <> HOT)
OR
(value=Null AND name <>HOT)
I also have some records (4 specifically) that have a name = nullvalue. When I run this query it picks out all the records with a name, and skips HOT(which is correct), but skips the nulls which I also want to include. Can someone help me in finding the reason for this error?